Zoltan HERPAI 0dfc0495fc kirkwood: add support for Netgear Stora (MS2000/2110) NAS ... Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6281 @1GHz - 128Mb RAM - 256Mb NAND - 1x GbE LAN (Marvell 88E1116) - 1x USB 2.0 - 2x SATA - PCF8563 RTC - LM75 sensor - TC654 PWM fan controller - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 netgear_stora-u-boot.kwb - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade The fan is controlled in 3 stages by a script running every minute from cron, measuring the CPU temperature. Snippets taken from bodhi <mibodhi@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>		2024-03-17 00:19:22 +01:00
..
001-5.18-Add-Ctera-C-200-V1-board.patch
002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
100-ib62x0.patch
101-iconnect.patch
102-dockstar.patch
103-iomega-ix2-200.patch
105-linksys-viper-dts.patch
106-goflexnet.patch
107-01-zyxel-nsa3x0-common-nand-partitions.patch
107-03-nsa325.patch
109-pogoplug_v4.patch
110-pogo_e02.patch
111-l-50.patch
112-sheevaplug.patch
113-readynas_duo_v2.patch
114-ctera-c-200-v1.patch	kirkwood: fix Ctera C200 V1 ubi part name	2023-12-12 18:52:27 +01:00
115-nsa310s.patch
116-4i-edge-200.patch
117-netgear_stora.patch	kirkwood: add support for Netgear Stora (MS2000/2110) NAS	2024-03-17 00:19:22 +01:00
201-enable-sata-port-specific-led-triggers.patch
202-linksys-find-active-root.patch
203-blackarmor-nas220.patch