mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
8a4dc6f48c
The Ubiquiti Network airCube ISP is a cube shaped 2.4 GHz with internal
2x2 MIMO antennas. It can be supplied via a USB connector or via PoE.
There are for 10/100 Mbps ports (1 * WAN + 3 * LAN). There is an
optional PoE passthrough from the first LAN port to the WAN port.
SoC: Qualcomm / Atheros QCA9533-BL3A
RAM: 64 MB DDR2
Flash: 16 MB SPI NOR
Ethernet: 4x 10/100 Mbps (1 WAN + 3 LAN)
LEDS: 1x via a SPI controller (not yet supported)
Buttons: 1x Reset
Serial: 1x (only RX and TX); 115200 baud, 8N1
Missing points:
- LED not yet supported
- Factory upgrade via web IF or TFTP recovery not yet supported
(Needs RSA signed images, for details see PR#1958)
The serial port is on a four pin connextor labeled J1 and located
between Ethernet and USB connector. The pinout is:
1. 3V3 (out)
2. Rx (in)
3. Tx (out)
4. GND
Upgrading via serial port / U-Boot:
- Connect the serial port via a level converter
- Power the system and stop U-Boot with pressing any key when `Hit any
key to stop autoboot` is displayed. Note: Pressing space multiple
times untill U-Boot reaches that location works well.
- Connect a PC with the IP 192.168.1.100 (or some other in that net)
running a TFTP-Server to one of the LAN ports. Copy the sysupgrade
image to the server.
- Set the U-Boot server IP with
setenv serverip 192.168.1.100
- Load the flash image to RAM with
tftpboot 0x81000000 sysupgrade.bin
- Erase the flash with
erase 0x9f050000 0x9ffaffff
- Write the new flash content with
cp 0x81000000 0x9f050000 ${filesize}
- Reset the device with
reset
Signed-off-by: Christian Mauderer <oss@c-mauderer.de>
[removed full stop in subject and added lockdown note to commit message]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
244 lines
6.6 KiB
Makefile
244 lines
6.6 KiB
Makefile
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
|
|
|
|
# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
|
|
# VERSION_DIST being on the place of major(?) version number, so we need to
|
|
# use some number.
|
|
UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
|
|
|
|
# mkubntimage is using the kernel image direct
|
|
# routerboard creates partitions out of the ubnt header
|
|
define Build/mkubntimage
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-k $(IMAGE_KERNEL) \
|
|
-r $@ \
|
|
-o $@
|
|
endef
|
|
|
|
# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
|
|
# booting the image, the size doesn't matter.
|
|
define Build/mkubntimage-split
|
|
-[ -f $@ ] && ( \
|
|
dd if=$@ of=$@.old1 bs=1024k count=1; \
|
|
dd if=$@ of=$@.old2 bs=1024k skip=1; \
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
|
|
-k $@.old1 \
|
|
-r $@.old2 \
|
|
-o $@; \
|
|
rm $@.old1 $@.old2 )
|
|
endef
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
|
|
define Device/ubnt
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
IMAGE_SIZE := 7552k
|
|
UBNT_BOARD := XM
|
|
UBNT_VERSION := 6.0.0
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
|
|
endef
|
|
|
|
define Device/ubnt-xm
|
|
$(Device/ubnt)
|
|
DEVICE_PACKAGES += kmod-usb-ohci rssileds
|
|
UBNT_TYPE := XM
|
|
UBNT_CHIP := ar7240
|
|
ATH_SOC := ar7241
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-bz
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := BZ
|
|
UBNT_CHIP := ar7240
|
|
ATH_SOC := ar7241
|
|
endef
|
|
|
|
define Device/ubnt-wa
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := WA
|
|
UBNT_CHIP := ar934x
|
|
UBNT_BOARD := WA
|
|
UBNT_VERSION := 8.5.0
|
|
ATH_SOC := ar9342
|
|
endef
|
|
|
|
define Device/ubnt-xw
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := XW
|
|
UBNT_CHIP := ar934x
|
|
UBNT_BOARD := XM
|
|
UBNT_VERSION := 6.0.4
|
|
UBNT_REVISION := 42.$(UBNT_REVISION)
|
|
ATH_SOC := ar9342
|
|
endef
|
|
|
|
define Device/ubnt_airrouter
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti AirRouter
|
|
SUPPORTED_DEVICES += airrouter
|
|
endef
|
|
TARGET_DEVICES += ubnt_airrouter
|
|
|
|
define Device/ubnt_bullet-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Bullet-M
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m
|
|
|
|
define Device/ubnt_bullet-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Bullet-M (XW)
|
|
SUPPORTED_DEVICES += bullet-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m-xw
|
|
|
|
define Device/ubnt_rocket-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Rocket-M
|
|
SUPPORTED_DEVICES += rocket-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_rocket-m
|
|
|
|
define Device/ubnt_nanostation-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Nanostation M
|
|
SUPPORTED_DEVICES += nano-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-m
|
|
|
|
define Device/ubnt_nanostation-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Nanostation M (XW)
|
|
SUPPORTED_DEVICES += nano-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-m-xw
|
|
|
|
define Device/ubnt_lap-120
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti LiteAP ac (LAP-120)
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_lap-120
|
|
|
|
define Device/ubnt_nanobeam-ac
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti NanoBeam AC
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanobeam-ac
|
|
|
|
define Device/ubnt_nanostation-ac
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti Nanostation AC
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-ac
|
|
|
|
define Device/ubnt_nanostation-ac-loco
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti Nanostation AC loco
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-ac-loco
|
|
|
|
define Device/ubnt_unifi
|
|
$(Device/ubnt-bz)
|
|
DEVICE_TITLE := Ubiquiti UniFi
|
|
SUPPORTED_DEVICES += unifi
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi
|
|
|
|
define Device/ubnt_unifiac
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 7744k
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
|
|
|
|
define Device/ubnt_unifiac-lite
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
|
|
SUPPORTED_DEVICES += ubnt-unifiac-lite
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-lite
|
|
|
|
define Device/ubnt_unifiac-mesh
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
|
|
SUPPORTED_DEVICES += ubnt-unifiac-mesh
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-mesh
|
|
|
|
define Device/ubnt_unifiac-mesh-pro
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh Pro
|
|
SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-mesh-pro
|
|
|
|
define Device/ubnt_unifiac-pro
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
|
|
DEVICE_PACKAGES += kmod-usb-core kmod-usb2
|
|
SUPPORTED_DEVICES += ubnt-unifiac-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-pro
|
|
|
|
define Device/ubnt_routerstation_common
|
|
DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci kmod-usb2 fconfig
|
|
ATH_SOC := ar7161
|
|
IMAGE_SIZE := 16128k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
|
|
# IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
endef
|
|
|
|
define Device/ubnt_routerstation
|
|
$(Device/ubnt_routerstation_common)
|
|
DEVICE_TITLE := Ubiquiti RouterStation
|
|
UBNT_BOARD := RS
|
|
UBNT_TYPE := RSx
|
|
UBNT_CHIP := ar7100
|
|
DEVICE_PACKAGES += -swconfig
|
|
endef
|
|
TARGET_DEVICES += ubnt_routerstation
|
|
|
|
define Device/ubnt_routerstation-pro
|
|
$(Device/ubnt_routerstation_common)
|
|
DEVICE_TITLE := Ubiquiti RouterStation Pro
|
|
UBNT_BOARD := RSPRO
|
|
UBNT_TYPE := RSPRO
|
|
UBNT_CHIP := ar7100pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_routerstation-pro
|
|
|
|
define Device/ubnt_acb-isp
|
|
$(Device/ubnt)
|
|
ATH_SOC := qca9533
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_TITLE := Ubiquiti airCube ISP
|
|
UBNT_BOARD := ACB-ISP
|
|
UBNT_TYPE := ACB
|
|
UBNT_CHIP := qca9533
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += ubnt_acb-isp
|