openwrt/target/linux/ath79/image
Ryan Mounce 6d6985ff0e ath79: add support for WD My Net N750
SoC: AR9344
RAM: 128MB
Flash: 16MiB Winbond 25Q128BVFG SPI NOR
5GHz WiFi: AR9380 PCIe 3x3:3 802.11n
2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n

5x Gigabit ethernet via AR8327N switch (green + amber LEDs)
2x USB 2.0 via GL850G hub
4x front LEDs from SoC GPIO
1x front WPS button from SoC GPIO
1x bottom reset button from SoC GPIO

Known issues:
AR8327N LEDs only have default functionality, not presented in sysfs.
This is a regression from ar71xx.

UART header JP1, 115200 no parity 1 stop
TX
GND
VCC
(N/P)
RX

See https://openwrt.org/toh/wd/n750 for flashing detail.
Procedures unchanged from ar71xx.

Tested sysupgrade + factory flash from WD Emergency Recovery

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2019-05-27 22:44:08 +02:00
..
lzma-loader ath79: lzma-loader: sync with ar71xx target 2018-06-06 22:25:53 +02:00
common-buffalo.mk ath79: add hwver parameter to buffalo-tag 2018-10-07 15:44:19 +02:00
common-netgear.mk ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
common-tp-link.mk ath79: Utilize tplink-safeloader definition 2019-04-06 19:14:06 +02:00
generic-tp-link.mk ath79: add support for TP-Link Archer D50 V1 2019-05-18 17:59:49 +02:00
generic-ubnt.mk ath79: add support for Ubiquiti airCube ISP 2019-04-08 18:37:04 +02:00
generic.mk ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
Makefile ath79: add support for Buffalo BHR-4GRV2 2018-08-09 18:44:57 +02:00
nand.mk ath79: fix boardname of GL.iNet GL-AR300M 2018-12-31 14:24:21 +01:00
tiny-netgear.mk ath79: remove more duplicate image build variables 2019-04-09 11:09:26 +02:00
tiny-tp-link.mk ath79: add support for TP-Link TL-WR941N v7 (CN) 2019-03-24 01:44:27 +01:00
tiny.mk ath79: modify mtd partitions for Buffalo BHR-4GRV2 2018-11-26 12:28:17 +01:00