ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-20 03:36:29 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
6d6127e537
openwrt/target/linux/ramips/dts
History
Deng Qingfang 5580a9dd31 ramips: add support for GeHua GHL-R-001 
Specs
	SoC: MT7621AT
	RAM: 512MiB
	Flash: 32MiB MX25L25635F SPI NOR
	2.4G: MT7603EN
	5G: MT7612EN
	Ethernet: 4x GE ports (1x WAN, 3x LAN) with link status LEDs
	USB 3.0
	LEDs: POWER, 5G WIFI, 2.4G WIFI, USB, Internet.
	      The last two ones are controlled by GPIO
	UART: There are 2 UARTs (UARTLITE1/ttyS0 and UARTLITE3/ttyS1) on board.
	      UARTLITE1 is close to LEDs, and UARTLITE3 is close to flash chip.
	      The stock u-boot uses UARTLITE1 by default. Baud rate is 57600

Flash instruction
	1. telnet 192.168.9.1 2317, username is "root" and password is "admin"
	   One can alternatively use UART to log in
	2. Put OpenWrt firmware in a FAT32 USB drive, and connect it to the router
	   One can alternatively download the firmware via wget through Internet
	3. mtd write /path/to/openwrt.bin firmware
	4. reboot

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-29 16:03:30 +01:00
..
3G150B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G300M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G-6200N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G-6200NL.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
11ACNAS.dts ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
A5-V11.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AC1200RM.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AI-BR100.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AIR3GII.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
ALL5002.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL5003.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AP-MT7621A-V60.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AR670W.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
AR725W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC2-v1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20i.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20v1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20v4.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ArcherC50.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC50V3.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ArcherMR200.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ATP-52B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWAPN2403.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
AWUSFREE1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BC2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BDCOM-WAP2100-SK.dts ramips: bdcom-wap2100: Change DTS license to GPL-2.0-or-later OR MIT 2018-11-29 13:15:44 +01:00
BOCCO.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BR-6475ND.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BR-6478AC-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BROADWAY.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
C108.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CARAMBOLA.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CF-WR800N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CreativeBox-v1.dts ramips: add support for CreativeBox v1 2018-12-28 12:45:23 +01:00
CS-QR10.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
CY-SWR1100.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
D105.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
D240.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DAP-1350.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DAP-1522-A1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
DB-WRT01.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
DCH-M225.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
DCS-930.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DCS-930L-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-300-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-300-B7.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-320-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-600-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-610-A1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-615-D.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
DIR-615-H1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
DIR-620-A1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-620-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-645.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-810L.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-860L-B1.dts ramips: fix firmware compatible string for dir860l-b1 2018-12-08 14:18:42 +01:00
DUZUN-DM06.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DWR-116-A1.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
DWR-118-A1.dts ramips: add support for D-Link DWR-118-A1 2018-12-03 15:34:56 +01:00
DWR-118-A2.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
DWR-512-B.dts ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
DWR-921-C1.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
DWR-922-E2.dts ramips: add support for DLINK DWR-922-E2 2018-12-29 16:03:30 +01:00
E1700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
elecom_wrc-gst.dtsi ramips: add SPDX license identifier into some dts,dtsi 2018-12-28 12:45:23 +01:00
ESR-9753.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EW1200.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EX2700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EX3700.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
F5D8235_V1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F5D8235_V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F7C027.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FIREWRT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FONERA20N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FREESTATION5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GB-PC1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GB-PC2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GHL-R-001.dts ramips: add support for GeHua GHL-R-001 2018-12-29 16:03:30 +01:00
GL-MT300A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300N-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT750.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5X61.dtsi ramips: several fixes for HC5x61 2018-12-15 20:02:07 +01:00
HC5661.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HC5661A.dts ramips: disable sdhc for HC5661A 2018-12-06 12:17:25 +01:00
HC5761.dts ramips: several fixes for HC5x61 2018-12-15 20:02:07 +01:00
HC5861.dts ramips: several fixes for HC5x61 2018-12-15 20:02:07 +01:00
HC5861B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5962.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HG255D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HLKRM04.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HPM.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HT-TM02.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HW550-3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
IP2202.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N805R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N825R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N926R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
K2G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
K2P.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ki_rb.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn_rc.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn_rf.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kng_rc.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
LINKIT7688.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
LR-25G001.dts ramips: specify "firmware" partition format in JBOOT devices 2018-11-30 00:22:04 +01:00
M2M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
MAC1200RV2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MicroWRT.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
MINIEMBPLUG.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MINIEMBWIFI.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MIR3G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
MIWIFI-MINI.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
MIWIFI-NANO.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MLW221.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MLWG2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MOFI3500-3GN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MPRA1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MPRA2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MR-102N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
mt7620a.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
mt7620n.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
mt7621.dtsi ramips: fix MT7621 dtsi 2018-12-29 16:03:30 +01:00
mt7628an.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
MT7620a_MT7530.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_MT7610e.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_V22SG.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7621.dts ramips: move partitions into partition table node 2018-08-04 08:39:35 +02:00
MT7628.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-750DHP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-DP150N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-EX300NP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-EX750NP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-W300NH2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-WDPR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NA930.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NBG-419N2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NBG-419N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NCS601W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Newifi-D1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
Newifi-D2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE.dtsi ramips: fix whitespace and comment issues in dts 2018-08-04 08:39:35 +02:00
NW718.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
OMEGA2.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OMEGA2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
OMEGA2P.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OY-0001.dts ramips: mt7620: disable PCIe if nothing is attached 2018-12-03 15:34:56 +01:00
PBR-D1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
PBR-M1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1208.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1218.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1218A.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
PSG1218B.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
PSR-680W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PWH2004.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
R6120.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
R6220.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
R6350.dts ramips: add SPDX license identifier into some dts,dtsi 2018-12-28 12:45:23 +01:00
RB750Gr3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RBM11G.dts ramips: mt7621: specify "firmware" partition format for remaining devices 2018-12-13 13:39:56 +01:00
RBM33G.dts ramips: mt7621: specify "firmware" partition format for remaining devices 2018-12-13 13:39:56 +01:00
RE350.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RE6500.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RP-N53.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
rt2880.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt3050.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt3352.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt3883.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt5350.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
RT5350F-OLINUXINO-EVB.dts ramips: introduce RT5350F-OLINUXINO.dtsi 2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dts ramips: introduce RT5350F-OLINUXINO.dtsi 2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-AC51U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-G32-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N10-PLUS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N12-PLUS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N13U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N14U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N15.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N56U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RUT5XX.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SAP-G3200U3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SK-WB8.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SKW92A.dts ramips: improve Skylab SKW92A support 2018-11-26 15:54:22 +01:00
SL-R7205.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-638APB-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-691GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-692GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-714TRU.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Timecloud.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TINY-AC.dts ramips: mt7620: add missing pci wifi nodes to dts files 2018-12-03 15:34:56 +01:00
TL-MR3020V3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-MR3420V5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WA801NDV5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR840NV4.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR840NV5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-WR841NV13.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR842NV5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR902ACV3.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TPLINK-8M.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U25AWF-H1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U35WF.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7621-06-256M-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7621-06-512M-64M.dts ramips: add support for UniElec U7621-06-512M-64M variant 2018-11-28 01:11:38 +01:00
U7621-06.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
U7628-01-128M-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7628-01.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
UBNT-ER-e50.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
UBNT-ERX-SFP.dts ramips: add missing soc compatibles to dts 2018-01-09 22:05:46 +01:00
UBNT-ERX.dts ramips: add support for Ubiquiti EdgeRouter X-SFP 2017-06-07 06:33:33 +02:00
UR-326N4G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
UR-336UN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
V11STFE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
V22RW-2X2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VAR11N-300.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE2.dtsi ramips: backport MT7628 pinmux fixes 2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
VR500.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W06.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W150M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W306R_V20.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W502U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W2914NSV2.dts ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
W2914NSV2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WCR150GN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WCR-1166DS.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WD03.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
WF-2881.dts ramips: mt7621: specify "firmware" partition format for remaining devices 2018-12-13 13:39:56 +01:00
WHR-300HP2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-600D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-1166D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-G300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WITI-256M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI-512M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZARD8800.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZFI630A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-330N3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-330N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-351.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-WN570HA1.dts ramips: add support for Wavlink WL-WN570HA1 2018-11-28 00:50:35 +01:00
WL-WN575A3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WLI-TX4-AG300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WLR-6000.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMDR-143N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMR-300.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN3000RPV3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN-AX1167GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN-GX300GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WNCE2001.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WNDR3700V5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WR1200JS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR1201.dts ramips: add support for MTC Wireless Router WR1201 2018-11-30 00:20:28 +01:00
WR6202.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRC-1167GHBK2-S.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRC-1900GST.dts ramips: add SPDX license identifier into some dts,dtsi 2018-12-28 12:45:23 +01:00
WRC-2533GST.dts ramips: add support for ELECOM WRC-1900GST 2018-08-23 22:42:09 +02:00
WRH-300CR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE2P.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WRTNODE2R.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WRTNODE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WSR-600.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WSR-1166.dts ramips: mt7621: specify "firmware" partition format for remaining devices 2018-12-13 13:39:56 +01:00
WT1520-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
WT3020-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WZR-AGL300NH.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
X5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
X8.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
XDXRN502J.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Y1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
Y1.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Y1S.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
YOUKU-YK1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-APE522II.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-CPE102.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WA05.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ZBT-WE1226.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE1326.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE2026.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE3526.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WG2626.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WG3526-16M.dts ramips: mt7621: add compatible strings 2017-07-29 09:24:32 +02:00
ZBT-WG3526-32M.dts ramips: mt7621: add compatible strings 2017-07-29 09:24:32 +02:00
ZBT-WG3526.dtsi ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526 2018-12-29 12:35:47 +01:00
ZBT-WR8305RT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZL5900V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZTE-Q7.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00