openwrt/target/linux/brcm2708/patches-4.4/0123-BCM270X_DT-Add-the-sdtweak-overlay-for-tuning-sdhost.patch
Álvaro Fernández Rojas 2b1c6b21b5 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-10 14:54:26 +02:00

74 lines
2.5 KiB
Diff

From 5c8479b7e82155eed9e86658935dda7bf8202b8d Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 4 Jan 2016 14:42:17 +0000
Subject: [PATCH] BCM270X_DT: Add the sdtweak overlay, for tuning sdhost
The sdhost overlay declares the sdhost interface and allows parameters
to be set. This is overkill for situations where the user just wants to
tweak the parameters of a pre-declared sdhost interface, so create an
sdtweak overlay that does just that.
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 14 ++++++++++++++
arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 21 +++++++++++++++++++++
3 files changed, 36 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/sdtweak-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -53,6 +53,7 @@ dtb-$(RPI_DT_OVERLAYS) += rpi-proto-over
dtb-$(RPI_DT_OVERLAYS) += rpi-sense-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += sdhost-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += sdio-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += sdtweak-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -635,6 +635,20 @@ Params: overclock_50 Clock (
(default on: polling once at boot-time)
+Name: sdtweak
+Info: Tunes the bcm2835-sdhost SD/MMC driver
+Load: dtoverlay=sdtweak,<param>=<val>
+Params: overclock_50 Clock (in MHz) to use when the MMC framework
+ requests 50MHz
+
+ force_pio Disable DMA support (default off)
+
+ pio_limit Number of blocks above which to use DMA
+ (default 1)
+
+ debug Enable debug output (default off)
+
+
Name: smi
Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25!
Load: dtoverlay=smi
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2708";
+
+ fragment@0 {
+ target = <&sdhost>;
+ frag1: __overlay__ {
+ brcm,overclock-50 = <0>;
+ brcm,pio-limit = <1>;
+ };
+ };
+
+ __overrides__ {
+ overclock_50 = <&frag1>,"brcm,overclock-50:0";
+ force_pio = <&frag1>,"brcm,force-pio?";
+ pio_limit = <&frag1>,"brcm,pio-limit:0";
+ debug = <&frag1>,"brcm,debug?";
+ };
+};