mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Also adds support for Raspberry Pi Compute Module 3 (untested). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
parent
ac08cb06f6
commit
2b1c6b21b5
target/linux/brcm2708
image
modules.mkpatches-4.4
0001-smsx95xx-fix-crimes-against-truesize.patch0002-smsc95xx-Disable-turbo-mode-by-default.patch0003-vmstat-Workaround-for-issue-where-dirty-page-count-g.patch0004-BCM2835_DT-Fix-I2S-register-map.patch0005-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch0006-irqchip-bcm2835-Add-FIQ-support.patch0007-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch0008-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch0009-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch0010-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch0011-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch0012-spi-bcm2835-Support-pin-groups-other-than-7-11.patch0013-ARM-bcm2835-Set-Serial-number-and-Revision.patch0014-bcm2835-i2s-get-base-address-for-DMA-from-devicetree.patch0015-bcm2835-i2s-add-24bit-support-update-bclk_ratio-to-m.patch0016-bcm2835-i2s-setup-clock-only-if-CPU-is-clock-master.patch0017-bcm2835-i2s-Eliminate-debugfs-directory-error.patch0018-bcm2835-i2s-Register-PCM-device.patch0019-bcm2835-i2s-Enable-MMAP-support-via-a-DT-property.patch0020-dmaengine-bcm2835-Add-slave-dma-support.patch0021-dmaengine-bcm2835-set-residue_granularity-field.patch0022-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch0023-bcm2835-dma-Fix-dreq-not-set-for-slave-transfers.patch0024-bcm2835-dma-Limit-cyclic-transfers-on-lite-channels-.patch0025-bcm2835-Add-support-for-uart1.patch0026-firmware-bcm2835-Add-missing-property-tags.patch0027-Main-bcm2708-bcm2709-linux-port.patch0028-squash-include-ARCH_BCM2708-ARCH_BCM2709.patch0029-Add-dwc_otg-driver.patch0030-bcm2708-framebuffer-driver.patch0031-dmaengine-Add-support-for-BCM2708.patch0032-MMC-added-alternative-MMC-driver.patch0033-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch0034-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch0035-bcm2708-alsa-sound-driver.patch0036-bcm2708-vchiq-driver.patch0037-vc_mem-Add-vc_mem-driver.patch0038-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch0039-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch0040-Add-SMI-driver.patch0041-Add-SMI-NAND-driver.patch0042-lirc-added-support-for-RaspberryPi-GPIO.patch0043-Add-cpufreq-driver.patch0044-Added-hwmon-thermal-driver-for-reporting-core-temper.patch0045-Add-Chris-Boot-s-i2c-driver.patch0046-char-broadcom-Add-vcio-module.patch0047-firmware-bcm2835-Support-ARCH_BCM270x.patch0048-bcm2835-add-v4l2-camera-device.patch0049-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch0050-fdt-Add-support-for-the-CONFIG_CMDLINE_EXTEND-option.patch0051-BCM2708-Add-core-Device-Tree-support.patch0052-bcm2835-Match-with-BCM2708-Device-Trees.patch0053-fbdev-add-FBIOCOPYAREA-ioctl.patch0057-Speed-up-console-framebuffer-imageblit-function.patch0058-Allow-mac-address-to-be-set-in-smsc95xx.patch0059-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch0060-Added-Device-IDs-for-August-DVB-T-205.patch0061-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch0062-ASoC-Add-support-for-PCM5102A-codec.patch0063-ASoC-Add-support-for-HifiBerry-DAC.patch0064-ASoC-Add-support-for-Rpi-DAC.patch0065-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch0066-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch0067-ASoC-wm8804-Set-idle_bias_off-to-false-Idle-bias-has.patch0068-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch0069-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch0070-Added-support-for-HiFiBerry-DAC.patch0071-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch0072-Update-ds1307-driver-for-device-tree-support.patch0073-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch0074-enc28j60-Add-device-tree-compatible-string-and-an-ov.patch0075-Add-driver-for-rpi-proto.patch0076-config-Add-default-configs.patch0077-bcm2835-bcm2835_defconfig.patch0078-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch0079-Improve-__copy_to_user-and-__copy_from_user-performa.patch0080-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch0081-spidev-Add-spidev-compatible-string-to-silence-warni.patch0082-scripts-dtc-Add-overlay-support.patch0083-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch0084-RaspiDAC3-support.patch0085-tpa6130a2-Add-headphone-switch-control.patch0086-irq-bcm2835-Fix-building-with-2708.patch0087-rpi_display-add-backlight-driver-and-overlay.patch0088-bcm2835-dma-Fix-up-convert-to-DMA-pool.patch0089-scripts-Multi-platform-support-for-mkknlimg-and-knli.patch0090-drm-vc4-Add-suport-for-3D-rendering-using-the-V3D-en.patch0091-drm-vc4-Force-HDMI-to-connected.patch0092-drm-vc4-bo-cache-locking-fixes.patch0093-drm-vc4-bo-cache-locking-cleanup.patch0094-drm-vc4-Use-job_lock-to-protect-seqno_cb_list.patch0095-drm-vc4-Drop-struct_mutex-around-CL-validation.patch0096-drm-vc4-Drop-struct_mutex-around-CL-validation.patch0097-drm-vc4-Add-support-for-more-display-plane-formats.patch0098-drm-vc4-No-need-to-stop-the-stopped-threads.patch0099-drm-vc4-Remove-extra-barrier-s-aroudn-CTnCA-CTnEA-se.patch0100-drm-vc4-Fix-a-typo-in-a-V3D-debug-register.patch
@ -68,8 +68,8 @@ ifeq ($(SUBTARGET),bcm2709)
|
||||
endif
|
||||
|
||||
define Device/rpi-3
|
||||
DEVICE_TITLE := Raspberry Pi 3 B
|
||||
DEVICE_DTS := bcm2710-rpi-3-b
|
||||
DEVICE_TITLE := Raspberry Pi 3 B/CM
|
||||
DEVICE_DTS := bcm2710-rpi-3-b bcm2710-rpi-cm3
|
||||
DEVICE_PACKAGES := brcmfmac43430-firmware-sdio kmod-brcmfmac wpad-mini
|
||||
endef
|
||||
ifeq ($(SUBTARGET),bcm2710)
|
||||
|
@ -947,6 +947,7 @@ dtparam=spi=on
|
||||
#dtoverlay=hifiberry-dac
|
||||
#dtoverlay=hifiberry-dacplus
|
||||
#dtoverlay=hifiberry-digi
|
||||
#dtoverlay=hifiberry-digi-pro
|
||||
#dtoverlay=iqaudio-dac
|
||||
#dtoverlay=iqaudio-dacplus
|
||||
#dtoverlay=iqaudio-digi-wm8804-audio
|
||||
|
@ -183,7 +183,7 @@ endef
|
||||
$(eval $(call KernelPackage,sound-soc-hifiberry-dacplus))
|
||||
|
||||
define KernelPackage/sound-soc-hifiberry-digi
|
||||
TITLE:=Support for HifiBerry Digi
|
||||
TITLE:=Support for HifiBerry Digi / Digi+ / Digi+ Pro
|
||||
KCONFIG:= \
|
||||
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI \
|
||||
CONFIG_SND_SOC_WM8804
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 047957666a5478b924a129892c54ab9c41816a43 Mon Sep 17 00:00:00 2001
|
||||
From 4f81faf37ec66edd44da24800c5a5ae87edae808 Mon Sep 17 00:00:00 2001
|
||||
From: Steve Glendinning <steve.glendinning@smsc.com>
|
||||
Date: Thu, 19 Feb 2015 18:47:12 +0000
|
||||
Subject: [PATCH 001/423] smsx95xx: fix crimes against truesize
|
||||
Subject: [PATCH] smsx95xx: fix crimes against truesize
|
||||
|
||||
smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 4b0c62e74a6e2e01e7d37fb6be0865df77c0ad03 Mon Sep 17 00:00:00 2001
|
||||
From 588a0950ef065eb5a0b36974394245ae2c9fc75b Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Fri, 17 Apr 2015 16:58:45 +0100
|
||||
Subject: [PATCH 002/423] smsc95xx: Disable turbo mode by default
|
||||
Subject: [PATCH] smsc95xx: Disable turbo mode by default
|
||||
|
||||
---
|
||||
drivers/net/usb/smsc95xx.c | 2 +-
|
||||
|
@ -1,8 +1,8 @@
|
||||
From d69c65cb5ad6738d5bec2531df75824c44459800 Mon Sep 17 00:00:00 2001
|
||||
From 8ca7ff8021f8d9bcbac83bd4584da9bbc854b829 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 18 Jun 2014 13:42:01 +0100
|
||||
Subject: [PATCH 003/423] vmstat: Workaround for issue where dirty page count
|
||||
goes negative
|
||||
Subject: [PATCH] vmstat: Workaround for issue where dirty page count goes
|
||||
negative
|
||||
|
||||
See:
|
||||
https://github.com/raspberrypi/linux/issues/617
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 7d5a47372854564f8071edeaf217360d2f53cde0 Mon Sep 17 00:00:00 2001
|
||||
From 7aa3931981956896b353b58c068a941f522182bf Mon Sep 17 00:00:00 2001
|
||||
From: Robert Tiemann <rtie@gmx.de>
|
||||
Date: Mon, 20 Jul 2015 11:01:25 +0200
|
||||
Subject: [PATCH 004/423] BCM2835_DT: Fix I2S register map
|
||||
Subject: [PATCH] BCM2835_DT: Fix I2S register map
|
||||
|
||||
---
|
||||
Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt | 4 ++--
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 8ec469e6ed6a5dd357c04322dfc4e2ddbfcc040b Mon Sep 17 00:00:00 2001
|
||||
From 71609ab22785edd13b385920b1b0c6de24adc901 Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Fri, 4 Dec 2015 17:41:50 +0000
|
||||
Subject: [PATCH 005/423] irq-bcm2836: Prevent spurious interrupts, and trap
|
||||
them early
|
||||
Subject: [PATCH] irq-bcm2836: Prevent spurious interrupts, and trap them early
|
||||
|
||||
The old arch-specific IRQ macros included a dsb to ensure the
|
||||
write to clear the mailbox interrupt completed before returning
|
||||
|
@ -1,7 +1,7 @@
|
||||
From daf4407e90396b12f87cfd75651505dee67f1c0c Mon Sep 17 00:00:00 2001
|
||||
From e34586ca8f6b346d1ee37230f26c7ad44ca15786 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Fri, 12 Jun 2015 19:01:05 +0200
|
||||
Subject: [PATCH 006/423] irqchip: bcm2835: Add FIQ support
|
||||
Subject: [PATCH] irqchip: bcm2835: Add FIQ support
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d6cad8a047430f5095e43e0d0e8f083e6ab411df Mon Sep 17 00:00:00 2001
|
||||
From e6387565d57b8d3912948dfb89d27705ef04bb89 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Fri, 23 Oct 2015 16:26:55 +0200
|
||||
Subject: [PATCH 007/423] irqchip: irq-bcm2835: Add 2836 FIQ support
|
||||
Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From cc33367763a6674463698cffab1a4a653df4ebd3 Mon Sep 17 00:00:00 2001
|
||||
From 5638cf1b2b8a418553790662c414b29ced8521dd Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Tue, 30 Jun 2015 14:12:42 +0100
|
||||
Subject: [PATCH 008/423] serial: 8250: Don't crash when nr_uarts is 0
|
||||
Subject: [PATCH] serial: 8250: Don't crash when nr_uarts is 0
|
||||
|
||||
---
|
||||
drivers/tty/serial/8250/8250_core.c | 2 ++
|
||||
|
@ -1,8 +1,7 @@
|
||||
From f168c856794b7a771661df395f3fd16b8c8435b3 Mon Sep 17 00:00:00 2001
|
||||
From d64c6c6de97acb1f18415dfeeabd7e19294830a1 Mon Sep 17 00:00:00 2001
|
||||
From: notro <notro@tronnes.org>
|
||||
Date: Thu, 10 Jul 2014 13:59:47 +0200
|
||||
Subject: [PATCH 009/423] pinctrl-bcm2835: Set base to 0 give expected gpio
|
||||
numbering
|
||||
Subject: [PATCH] pinctrl-bcm2835: Set base to 0 give expected gpio numbering
|
||||
|
||||
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
|
||||
---
|
||||
|
@ -1,8 +1,8 @@
|
||||
From 62e5e9d21249eb4818c37bbcc07b334f97684f0b Mon Sep 17 00:00:00 2001
|
||||
From 1d1f6e6688a282e9b091fcb56719893c72e88a3a Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Tue, 24 Feb 2015 13:40:50 +0000
|
||||
Subject: [PATCH 010/423] pinctrl-bcm2835: Fix interrupt handling for GPIOs
|
||||
28-31 and 46-53
|
||||
Subject: [PATCH] pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and
|
||||
46-53
|
||||
|
||||
Contrary to the documentation, the BCM2835 GPIO controller actually has
|
||||
four interrupt lines - one each for the three IRQ groups and one common. Rather
|
||||
|
@ -1,8 +1,8 @@
|
||||
From 33665d0e0cca6401025655121d66450716353f75 Mon Sep 17 00:00:00 2001
|
||||
From d52d6e440040cd5139f9f9ef0071ea00b103302e Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Thu, 26 Feb 2015 09:58:22 +0000
|
||||
Subject: [PATCH 011/423] pinctrl-bcm2835: Only request the interrupts listed
|
||||
in the DTB
|
||||
Subject: [PATCH] pinctrl-bcm2835: Only request the interrupts listed in the
|
||||
DTB
|
||||
|
||||
Although the GPIO controller can generate three interrupts (four counting
|
||||
the common one), the device tree files currently only specify two. In the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 9cb63901af94334ee9f4bf55f731633ea478626a Mon Sep 17 00:00:00 2001
|
||||
From 41c1cc2920df75124c931cd58f6b67ec586a5a6a Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Wed, 24 Jun 2015 14:10:44 +0100
|
||||
Subject: [PATCH 012/423] spi-bcm2835: Support pin groups other than 7-11
|
||||
Subject: [PATCH] spi-bcm2835: Support pin groups other than 7-11
|
||||
|
||||
The spi-bcm2835 driver automatically uses GPIO chip-selects due to
|
||||
some unreliability of the native ones. In doing so it chooses the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d9bc838cde2a45c850c3a23d96c8ebe9715ea253 Mon Sep 17 00:00:00 2001
|
||||
From 3b9d28ec938020106f431f5a47ab5525b73bb0d0 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Wed, 3 Jun 2015 12:26:13 +0200
|
||||
Subject: [PATCH 013/423] ARM: bcm2835: Set Serial number and Revision
|
||||
Subject: [PATCH] ARM: bcm2835: Set Serial number and Revision
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 5d071d8a4f3a0c60bd48071d64f9d311d019d296 Mon Sep 17 00:00:00 2001
|
||||
From 17025015a60ffc92d09ade98131ed080bbf09106 Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 16:44:05 +0200
|
||||
Subject: [PATCH 014/423] bcm2835-i2s: get base address for DMA from devicetree
|
||||
Subject: [PATCH] bcm2835-i2s: get base address for DMA from devicetree
|
||||
|
||||
Code copied from spi-bcm2835. Get physical address from devicetree
|
||||
instead of using hardcoded constant.
|
||||
|
@ -1,8 +1,8 @@
|
||||
From b4e96aa5e8f7825050d7ef74ec59d684cedcc8f1 Mon Sep 17 00:00:00 2001
|
||||
From fb1dbd3a7ff1ae0ccd429a4decafc882473f5d94 Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 15:21:16 +0200
|
||||
Subject: [PATCH 015/423] bcm2835-i2s: add 24bit support, update bclk_ratio to
|
||||
more correct values
|
||||
Subject: [PATCH] bcm2835-i2s: add 24bit support, update bclk_ratio to more
|
||||
correct values
|
||||
|
||||
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From bd46c6f9df173b2b81bac5cb19814f0b66063b25 Mon Sep 17 00:00:00 2001
|
||||
From 63e23a08bd0bcf782f870bacaf82404e36a6a1bd Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 15:25:51 +0200
|
||||
Subject: [PATCH 016/423] bcm2835-i2s: setup clock only if CPU is clock master
|
||||
Subject: [PATCH] bcm2835-i2s: setup clock only if CPU is clock master
|
||||
|
||||
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 83f3ec096572e1f1878eb5f97632e7830fc606bd Mon Sep 17 00:00:00 2001
|
||||
From 487c53a0c7bbf586ccc441dfc6f7021dc5f1522d Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 15:49:51 +0200
|
||||
Subject: [PATCH 017/423] bcm2835-i2s: Eliminate debugfs directory error
|
||||
Subject: [PATCH] bcm2835-i2s: Eliminate debugfs directory error
|
||||
|
||||
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c096f1d64ef032af2c9f2713727de6ec849969c5 Mon Sep 17 00:00:00 2001
|
||||
From d86d8ab0405b4eecee7516670e9497ce450c1bbe Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 15:35:20 +0200
|
||||
Subject: [PATCH 018/423] bcm2835-i2s: Register PCM device
|
||||
Subject: [PATCH] bcm2835-i2s: Register PCM device
|
||||
|
||||
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ec8796e8ccf92931ff87fb7626be8f3e63ddc2d0 Mon Sep 17 00:00:00 2001
|
||||
From 4d08d5e742e59e1e73787bfeca27595d5afbf1af Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 15:55:21 +0200
|
||||
Subject: [PATCH 019/423] bcm2835-i2s: Enable MMAP support via a DT property
|
||||
Subject: [PATCH] bcm2835-i2s: Enable MMAP support via a DT property
|
||||
|
||||
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From a272c5805686c77e924f85e314cb5df77bea40be Mon Sep 17 00:00:00 2001
|
||||
From c9f03ab8241d445daebd5fb8c4cf63c976460e2d Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Thu, 9 Apr 2015 12:34:11 +0200
|
||||
Subject: [PATCH 020/423] dmaengine: bcm2835: Add slave dma support
|
||||
Subject: [PATCH] dmaengine: bcm2835: Add slave dma support
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 5780349e26ba486276936393f666bea55c5dbf1e Mon Sep 17 00:00:00 2001
|
||||
From f4f1c7f4084eca4b826a07a43c467e2febe57f1e Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Sat, 3 Oct 2015 15:58:59 +0200
|
||||
Subject: [PATCH 021/423] dmaengine: bcm2835: set residue_granularity field
|
||||
Subject: [PATCH] dmaengine: bcm2835: set residue_granularity field
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 24e006fc71be77120ac237af3797f4aa103ca0e1 Mon Sep 17 00:00:00 2001
|
||||
From d7714e2a4e40cbeb4e69fb7465621f2014b358d2 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Sat, 3 Oct 2015 22:22:55 +0200
|
||||
Subject: [PATCH 022/423] dmaengine: bcm2835: Load driver early and support
|
||||
legacy API
|
||||
Subject: [PATCH] dmaengine: bcm2835: Load driver early and support legacy API
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 411b5abcce1b72fdba106a7236548b8b5315a6e6 Mon Sep 17 00:00:00 2001
|
||||
From 93e23eca701dfbf20def2a598af43d64c39bd9b8 Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sat, 10 Oct 2015 12:29:18 +0200
|
||||
Subject: [PATCH 023/423] bcm2835-dma: Fix dreq not set for slave transfers
|
||||
Subject: [PATCH] bcm2835-dma: Fix dreq not set for slave transfers
|
||||
|
||||
Set dreq to slave_id if it is not set like in bcm2708-dmaengine.
|
||||
---
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 8eb5210cea099d814f9e583358343d8680c5d05d Mon Sep 17 00:00:00 2001
|
||||
From fc5bc111e65b27883284591aec9db5a290665ac9 Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Sun, 11 Oct 2015 12:28:30 +0200
|
||||
Subject: [PATCH 024/423] bcm2835-dma: Limit cyclic transfers on lite channels
|
||||
to 32k
|
||||
Subject: [PATCH] bcm2835-dma: Limit cyclic transfers on lite channels to 32k
|
||||
|
||||
Transfers larger than 32k cause repeated clicking with I2S soundcards.
|
||||
The exact reason is yet unknown, so limit to 32k as bcm2708-dmaengine
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c8963aeb4b3fbebc8e1de91a65e9f188a1e43d59 Mon Sep 17 00:00:00 2001
|
||||
From e95d949879bf632a5fa82c9a1c5607b40388484e Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Sat, 15 Aug 2015 20:50:02 +0200
|
||||
Subject: [PATCH 025/423] bcm2835: Add support for uart1
|
||||
Subject: [PATCH] bcm2835: Add support for uart1
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ed165fd5d29fa90e6605cb4b87ec5cd35e4209c7 Mon Sep 17 00:00:00 2001
|
||||
From 65277e76bcc581bb99f98bb69d9b603bdbfa1d98 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Fri, 26 Jun 2015 14:21:20 +0200
|
||||
Subject: [PATCH 026/423] firmware: bcm2835: Add missing property tags
|
||||
Subject: [PATCH] firmware: bcm2835: Add missing property tags
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 50d8450a9fd5b05873e3b404e2089067920d53c1 Mon Sep 17 00:00:00 2001
|
||||
From cea9e735ed55e4e75819e984290cf147e9712c73 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Sun, 12 May 2013 12:24:19 +0100
|
||||
Subject: [PATCH 027/423] Main bcm2708/bcm2709 linux port
|
||||
Subject: [PATCH] Main bcm2708/bcm2709 linux port
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From f455b928205d24aebbf0cc3cf5a9fff4cfb9563e Mon Sep 17 00:00:00 2001
|
||||
From 613412454d5196c8982a3abc0820389c16599a51 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 11 Nov 2015 21:01:15 +0000
|
||||
Subject: [PATCH 028/423] squash: include ARCH_BCM2708 / ARCH_BCM2709
|
||||
Subject: [PATCH] squash: include ARCH_BCM2708 / ARCH_BCM2709
|
||||
|
||||
---
|
||||
drivers/char/hw_random/Kconfig | 2 +-
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 89ea7c60a305783a6790e7e7e91b1451cd40fe78 Mon Sep 17 00:00:00 2001
|
||||
From 130a06f0f8becad1e93d3dda1ce96d6e5413ee39 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 1 May 2013 19:46:17 +0100
|
||||
Subject: [PATCH 029/423] Add dwc_otg driver
|
||||
Subject: [PATCH] Add dwc_otg driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 006091f6aa1f34a2b92fb8ff1defd86d232b7e90 Mon Sep 17 00:00:00 2001
|
||||
From c634714a43035371d4035b65e67413dcf1ff0f8e Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 17 Jun 2015 17:06:34 +0100
|
||||
Subject: [PATCH 030/423] bcm2708 framebuffer driver
|
||||
Subject: [PATCH] bcm2708 framebuffer driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 6ab9b89c4a3def17db462e0902bb0ba325a7c191 Mon Sep 17 00:00:00 2001
|
||||
From 5fca3a9b2f0c0c928fa94368cdb767829a696ed5 Mon Sep 17 00:00:00 2001
|
||||
From: Florian Meier <florian.meier@koalo.de>
|
||||
Date: Fri, 22 Nov 2013 14:22:53 +0100
|
||||
Subject: [PATCH 031/423] dmaengine: Add support for BCM2708
|
||||
Subject: [PATCH] dmaengine: Add support for BCM2708
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ed0042e046abbd2cee8425ff8e8c535cb025c22a Mon Sep 17 00:00:00 2001
|
||||
From 28aa7cada5d110ced59ef0d9392a7fb3121cc551 Mon Sep 17 00:00:00 2001
|
||||
From: gellert <gellert@raspberrypi.org>
|
||||
Date: Fri, 15 Aug 2014 16:35:06 +0100
|
||||
Subject: [PATCH 032/423] MMC: added alternative MMC driver
|
||||
Subject: [PATCH] MMC: added alternative MMC driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 7b251a5ab7f06c8f5720a0d49529e0dbe0514503 Mon Sep 17 00:00:00 2001
|
||||
From 0c9b7e17d022e45363737d67da590524416f8e3d Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Wed, 25 Mar 2015 17:49:47 +0000
|
||||
Subject: [PATCH 033/423] Adding bcm2835-sdhost driver, and an overlay to
|
||||
enable it
|
||||
Subject: [PATCH] Adding bcm2835-sdhost driver, and an overlay to enable it
|
||||
|
||||
BCM2835 has two SD card interfaces. This driver uses the other one.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From effd8d3a65306de4f6cb43aa2139a75d181d9cee Mon Sep 17 00:00:00 2001
|
||||
From dec8e7bfb37280733ec278955f1bd8dd2bc176b8 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 3 Jul 2013 00:31:47 +0100
|
||||
Subject: [PATCH 034/423] cma: Add vc_cma driver to enable use of CMA
|
||||
Subject: [PATCH] cma: Add vc_cma driver to enable use of CMA
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 809b8fb074a009dec508c02986b27979c5d78b1d Mon Sep 17 00:00:00 2001
|
||||
From b3f75cc54e1ee4612cfb34e2a91e03e3d1923534 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Mon, 26 Mar 2012 22:15:50 +0100
|
||||
Subject: [PATCH 035/423] bcm2708: alsa sound driver
|
||||
Subject: [PATCH] bcm2708: alsa sound driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 1b37904494fc7c9923dde14aa08a63405d89d989 Mon Sep 17 00:00:00 2001
|
||||
From 9a1f0040b1f125f8729c772c1ad8e6940b923d7a Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Tue, 2 Jul 2013 23:42:01 +0100
|
||||
Subject: [PATCH 036/423] bcm2708 vchiq driver
|
||||
Subject: [PATCH] bcm2708 vchiq driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 1dc99a2709085bc7bda11bd457280e9f00fd173b Mon Sep 17 00:00:00 2001
|
||||
From bad77c41a36b52033392a19b2b6d51037f2614a5 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 17 Jun 2015 16:07:06 +0100
|
||||
Subject: [PATCH 037/423] vc_mem: Add vc_mem driver
|
||||
Subject: [PATCH] vc_mem: Add vc_mem driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 98151664c3404e6ce9abe16241aaef78d260c967 Mon Sep 17 00:00:00 2001
|
||||
From 6bdbcad7cce6f6a6fc02f67add6b82d3fcc9e0c6 Mon Sep 17 00:00:00 2001
|
||||
From: Tim Gover <tgover@broadcom.com>
|
||||
Date: Tue, 22 Jul 2014 15:41:04 +0100
|
||||
Subject: [PATCH 038/423] vcsm: VideoCore shared memory service for BCM2835
|
||||
Subject: [PATCH] vcsm: VideoCore shared memory service for BCM2835
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ccfc207deae0f9e76975908af6c16460a4e05650 Mon Sep 17 00:00:00 2001
|
||||
From 5dc37246986844910511379a5c57ca87a50c6c0d Mon Sep 17 00:00:00 2001
|
||||
From: Luke Wren <luke@raspberrypi.org>
|
||||
Date: Fri, 21 Aug 2015 23:14:48 +0100
|
||||
Subject: [PATCH 039/423] Add /dev/gpiomem device for rootless user GPIO access
|
||||
Subject: [PATCH] Add /dev/gpiomem device for rootless user GPIO access
|
||||
|
||||
Signed-off-by: Luke Wren <luke@raspberrypi.org>
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d2e199c4c3e599a0166cbaed671f5446a366ccd6 Mon Sep 17 00:00:00 2001
|
||||
From d85d7801b25872d08bd848c40da8fce973db5e46 Mon Sep 17 00:00:00 2001
|
||||
From: Luke Wren <wren6991@gmail.com>
|
||||
Date: Sat, 5 Sep 2015 01:14:45 +0100
|
||||
Subject: [PATCH 040/423] Add SMI driver
|
||||
Subject: [PATCH] Add SMI driver
|
||||
|
||||
Signed-off-by: Luke Wren <wren6991@gmail.com>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From f7066cd5ed22219015dd9e55dd2070f4822da956 Mon Sep 17 00:00:00 2001
|
||||
From b1718d13dae01f04ead925c9562bf18634bbf267 Mon Sep 17 00:00:00 2001
|
||||
From: Luke Wren <wren6991@gmail.com>
|
||||
Date: Sat, 5 Sep 2015 01:16:10 +0100
|
||||
Subject: [PATCH 041/423] Add SMI NAND driver
|
||||
Subject: [PATCH] Add SMI NAND driver
|
||||
|
||||
Signed-off-by: Luke Wren <wren6991@gmail.com>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 687cb2fff7d0f3480fd39e5ffbebe912e46fa972 Mon Sep 17 00:00:00 2001
|
||||
From b4269ab1d08d22959ec26ce1d31a45a1c5e85191 Mon Sep 17 00:00:00 2001
|
||||
From: Aron Szabo <aron@aron.ws>
|
||||
Date: Sat, 16 Jun 2012 12:15:55 +0200
|
||||
Subject: [PATCH 042/423] lirc: added support for RaspberryPi GPIO
|
||||
Subject: [PATCH] lirc: added support for RaspberryPi GPIO
|
||||
|
||||
lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others
|
||||
See: https://github.com/raspberrypi/linux/issues/525
|
||||
|
@ -1,7 +1,7 @@
|
||||
From bf5b94ef7f3f667e384108aa84bee8195da04383 Mon Sep 17 00:00:00 2001
|
||||
From f3f2bddacba23cab954a421d490bd17364e69d2d Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 3 Jul 2013 00:49:20 +0100
|
||||
Subject: [PATCH 043/423] Add cpufreq driver
|
||||
Subject: [PATCH] Add cpufreq driver
|
||||
|
||||
Signed-off-by: popcornmix <popcornmix@gmail.com>
|
||||
---
|
||||
|
@ -1,8 +1,8 @@
|
||||
From 83b388b35dea05c454a5b2eceec0eff06cc863fb Mon Sep 17 00:00:00 2001
|
||||
From 688fec3024a2648a48396168a73ada00131682e1 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Tue, 26 Mar 2013 19:24:24 +0000
|
||||
Subject: [PATCH 044/423] Added hwmon/thermal driver for reporting core
|
||||
temperature. Thanks Dorian
|
||||
Subject: [PATCH] Added hwmon/thermal driver for reporting core temperature.
|
||||
Thanks Dorian
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d25b6fcbf3005ae61c5a1940b8a0a47ee545289b Mon Sep 17 00:00:00 2001
|
||||
From b78bc1bb96c2db043c3be03c1bcccefa22621543 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 17 Jun 2015 15:44:08 +0100
|
||||
Subject: [PATCH 045/423] Add Chris Boot's i2c driver
|
||||
Subject: [PATCH] Add Chris Boot's i2c driver
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ea599a4e38ae921ec5aa8966163ea442357281df Mon Sep 17 00:00:00 2001
|
||||
From 0fed71c0553d0bc86798f395c7e354cd132c9802 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Fri, 26 Jun 2015 14:27:06 +0200
|
||||
Subject: [PATCH 046/423] char: broadcom: Add vcio module
|
||||
Subject: [PATCH] char: broadcom: Add vcio module
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 996a87d316243001486fe36b36a7b6ffb4dd1b28 Mon Sep 17 00:00:00 2001
|
||||
From 2d716ee18a62c6e8b3a2e28a225bb3484693b6d2 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Fri, 26 Jun 2015 14:25:01 +0200
|
||||
Subject: [PATCH 047/423] firmware: bcm2835: Support ARCH_BCM270x
|
||||
Subject: [PATCH] firmware: bcm2835: Support ARCH_BCM270x
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From b7c2738cecfa7e32e689f9e9f51f7a0283c6e494 Mon Sep 17 00:00:00 2001
|
||||
From b2868be5ed011e649590efdbcc6356bee4fcf257 Mon Sep 17 00:00:00 2001
|
||||
From: Vincent Sanders <vincent.sanders@collabora.co.uk>
|
||||
Date: Wed, 30 Jan 2013 12:45:18 +0000
|
||||
Subject: [PATCH 048/423] bcm2835: add v4l2 camera device
|
||||
Subject: [PATCH] bcm2835: add v4l2 camera device
|
||||
|
||||
- Supports raw YUV capture, preview, JPEG and H264.
|
||||
- Uses videobuf2 for data transfer, using dma_buf.
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 5ea28aea74a57b9cbbb59ee7df29c5994fc6ad81 Mon Sep 17 00:00:00 2001
|
||||
From 10a2bc39e76f415f9a42166ccc7af7e7b43565fc Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Mon, 11 May 2015 09:00:42 +0100
|
||||
Subject: [PATCH 049/423] scripts: Add mkknlimg and knlinfo scripts from tools
|
||||
repo
|
||||
Subject: [PATCH] scripts: Add mkknlimg and knlinfo scripts from tools repo
|
||||
|
||||
The Raspberry Pi firmware looks for a trailer on the kernel image to
|
||||
determine whether it was compiled with Device Tree support enabled.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ef0a1dc5b8069728671aa1d4a9cee2a2beda16be Mon Sep 17 00:00:00 2001
|
||||
From 5e3dd32b2906cc4f07b81f18de3d4a23c417e8fc Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Fri, 5 Dec 2014 17:26:26 +0000
|
||||
Subject: [PATCH 050/423] fdt: Add support for the CONFIG_CMDLINE_EXTEND option
|
||||
Subject: [PATCH] fdt: Add support for the CONFIG_CMDLINE_EXTEND option
|
||||
|
||||
---
|
||||
drivers/of/fdt.c | 29 ++++++++++++++++++++++++-----
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c159387861a9b3e1b0f9fe12d6afe06f0cb8994d Mon Sep 17 00:00:00 2001
|
||||
From 48b5e0d194a88c4de6956f94ddd788e126de0a77 Mon Sep 17 00:00:00 2001
|
||||
From: notro <notro@tronnes.org>
|
||||
Date: Wed, 9 Jul 2014 14:46:08 +0200
|
||||
Subject: [PATCH 051/423] BCM2708: Add core Device Tree support
|
||||
Subject: [PATCH] BCM2708: Add core Device Tree support
|
||||
|
||||
Add the bare minimum needed to boot BCM2708 from a Device Tree.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d867b1d6a7470aec5946b495a10a311742b08c18 Mon Sep 17 00:00:00 2001
|
||||
From a8bd4a9fead66a720889c5693bf0d21608d9e2c0 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Sat, 15 Aug 2015 20:47:07 +0200
|
||||
Subject: [PATCH 052/423] bcm2835: Match with BCM2708 Device Trees
|
||||
Subject: [PATCH] bcm2835: Match with BCM2708 Device Trees
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 6e0a601e2a1eb727b7b3f00c41e5d54197087feb Mon Sep 17 00:00:00 2001
|
||||
From a05a655545efe01002cf061b4373a9bb0071a302 Mon Sep 17 00:00:00 2001
|
||||
From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
|
||||
Date: Mon, 17 Jun 2013 13:32:11 +0300
|
||||
Subject: [PATCH 053/423] fbdev: add FBIOCOPYAREA ioctl
|
||||
Subject: [PATCH] fbdev: add FBIOCOPYAREA ioctl
|
||||
|
||||
Based on the patch authored by Ali Gholami Rudi at
|
||||
https://lkml.org/lkml/2009/7/13/153
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 90df15f55607a4ec3b29374c5f7781300160bac3 Mon Sep 17 00:00:00 2001
|
||||
From 4d7fd18a26cbb4a3cab0aff6ed48070e3aaf3599 Mon Sep 17 00:00:00 2001
|
||||
From: Harm Hanemaaijer <fgenfb@yahoo.com>
|
||||
Date: Thu, 20 Jun 2013 20:21:39 +0200
|
||||
Subject: [PATCH 057/423] Speed up console framebuffer imageblit function
|
||||
Subject: [PATCH] Speed up console framebuffer imageblit function
|
||||
|
||||
Especially on platforms with a slower CPU but a relatively high
|
||||
framebuffer fill bandwidth, like current ARM devices, the existing
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 531927425d5bfd1525c7d47d321eeddff1eb3364 Mon Sep 17 00:00:00 2001
|
||||
From e681d15368e0c4515a5ee4bf238f859e8c501cf9 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Tue, 26 Mar 2013 17:26:38 +0000
|
||||
Subject: [PATCH 058/423] Allow mac address to be set in smsc95xx
|
||||
Subject: [PATCH] Allow mac address to be set in smsc95xx
|
||||
|
||||
Signed-off-by: popcornmix <popcornmix@gmail.com>
|
||||
---
|
||||
|
@ -1,8 +1,8 @@
|
||||
From f339686c292d0a4e50fbe6f9ccb294291f103605 Mon Sep 17 00:00:00 2001
|
||||
From cab5187fbbc59808bab951b7f2736c4f0deff9fa Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 8 May 2013 11:46:50 +0100
|
||||
Subject: [PATCH 059/423] enabling the realtime clock 1-wire chip DS1307 and
|
||||
1-wire on GPIO4 (as a module)
|
||||
Subject: [PATCH] enabling the realtime clock 1-wire chip DS1307 and 1-wire on
|
||||
GPIO4 (as a module)
|
||||
|
||||
1-wire: Add support for configuring pin for w1-gpio kernel module
|
||||
See: https://github.com/raspberrypi/linux/pull/457
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 934350e21fb2edfd042742892bbd4ea5173208ab Mon Sep 17 00:00:00 2001
|
||||
From c21be4772d67bc0b6bd3a59ce878b5dae705af44 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 3 Jul 2013 00:54:08 +0100
|
||||
Subject: [PATCH 060/423] Added Device IDs for August DVB-T 205
|
||||
Subject: [PATCH] Added Device IDs for August DVB-T 205
|
||||
|
||||
---
|
||||
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++
|
||||
|
@ -1,8 +1,8 @@
|
||||
From 1ca424ef0079f90d9c5d1310bcbefe928b5e3fec Mon Sep 17 00:00:00 2001
|
||||
From 7106c05e5f71588e746c786f93b1fca9dcdd3c50 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Wed, 18 Dec 2013 22:16:19 +0000
|
||||
Subject: [PATCH 061/423] config: Enable CONFIG_MEMCG, but leave it disabled
|
||||
(due to memory cost). Enable with cgroup_enable=memory.
|
||||
Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it disabled (due to
|
||||
memory cost). Enable with cgroup_enable=memory.
|
||||
|
||||
---
|
||||
kernel/cgroup.c | 23 ++++++++++++++++++++++-
|
||||
|
@ -1,7 +1,7 @@
|
||||
From fe45c479a680651326d22e6b966df63b2e719f70 Mon Sep 17 00:00:00 2001
|
||||
From dbcc62f3ac4f3996b77cfb6b00ec26dc99f2521b Mon Sep 17 00:00:00 2001
|
||||
From: Florian Meier <florian.meier@koalo.de>
|
||||
Date: Fri, 22 Nov 2013 14:59:51 +0100
|
||||
Subject: [PATCH 062/423] ASoC: Add support for PCM5102A codec
|
||||
Subject: [PATCH] ASoC: Add support for PCM5102A codec
|
||||
|
||||
Some definitions to support the PCM5102A codec
|
||||
by Texas Instruments.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 35b87454d0cc08adf25c4e4e50cfbcae16af45eb Mon Sep 17 00:00:00 2001
|
||||
From 592ac515f17d49627b6653375267bad5c4bb1e5c Mon Sep 17 00:00:00 2001
|
||||
From: Florian Meier <florian.meier@koalo.de>
|
||||
Date: Fri, 22 Nov 2013 19:19:08 +0100
|
||||
Subject: [PATCH 063/423] ASoC: Add support for HifiBerry DAC
|
||||
Subject: [PATCH] ASoC: Add support for HifiBerry DAC
|
||||
|
||||
This adds a machine driver for the HifiBerry DAC.
|
||||
It is a sound card that can
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 3f7614446e868612ab9099c7c959f43f29aa7e03 Mon Sep 17 00:00:00 2001
|
||||
From ffd6597f0c3cff5d2171347f23b9a98d4e6fa95e Mon Sep 17 00:00:00 2001
|
||||
From: Florian Meier <florian.meier@koalo.de>
|
||||
Date: Fri, 22 Nov 2013 19:21:34 +0100
|
||||
Subject: [PATCH 064/423] ASoC: Add support for Rpi-DAC
|
||||
Subject: [PATCH] ASoC: Add support for Rpi-DAC
|
||||
|
||||
---
|
||||
sound/soc/bcm/Kconfig | 7 +++
|
||||
|
@ -1,16 +1,16 @@
|
||||
From 6148931ae669f041a7036c9eb0ec1b225275c1dd Mon Sep 17 00:00:00 2001
|
||||
From 34e0545c33b0f444a5dd8c066cfe37420e95db33 Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Matuschek <info@crazy-audio.com>
|
||||
Date: Wed, 15 Jan 2014 21:41:23 +0100
|
||||
Subject: [PATCH 065/423] ASoC: wm8804: Implement MCLK configuration options,
|
||||
add 32bit support WM8804 can run with PLL frequencies of 256xfs and 128xfs
|
||||
for most sample rates. At 192kHz only 128xfs is supported. The existing
|
||||
driver selects 128xfs automatically for some lower samples rates. By using an
|
||||
additional mclk_div divider, it is now possible to control the behaviour.
|
||||
This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It
|
||||
should allow lower jitter and better signal quality. The behavior has to be
|
||||
controlled by the sound card driver, because some sample frequency share the
|
||||
same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only
|
||||
difference is the MCLK divider.
|
||||
Subject: [PATCH] ASoC: wm8804: Implement MCLK configuration options, add 32bit
|
||||
support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most
|
||||
sample rates. At 192kHz only 128xfs is supported. The existing driver selects
|
||||
128xfs automatically for some lower samples rates. By using an additional
|
||||
mclk_div divider, it is now possible to control the behaviour. This allows
|
||||
using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow
|
||||
lower jitter and better signal quality. The behavior has to be controlled by
|
||||
the sound card driver, because some sample frequency share the same setting.
|
||||
e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the
|
||||
MCLK divider.
|
||||
|
||||
This also added support for 32bit data.
|
||||
|
||||
|
@ -1,8 +1,8 @@
|
||||
From 8678473916702a1f744f65ca953febb10c297827 Mon Sep 17 00:00:00 2001
|
||||
From 1d300db91ccab78593f0ea40d4e1c8a931232197 Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Matuschek <info@crazy-audio.com>
|
||||
Date: Wed, 15 Jan 2014 21:42:08 +0100
|
||||
Subject: [PATCH 066/423] ASoC: BCM:Add support for HiFiBerry Digi. Driver is
|
||||
based on the patched WM8804 driver.
|
||||
Subject: [PATCH] ASoC: BCM:Add support for HiFiBerry Digi. Driver is based on
|
||||
the patched WM8804 driver.
|
||||
|
||||
Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
|
||||
|
||||
|
@ -1,8 +1,8 @@
|
||||
From db3e779eb462f937984d57ed072b84c736ac179c Mon Sep 17 00:00:00 2001
|
||||
From 0dd064b656993f40c09c055a6bef13fa023ceedf Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Matuschek <info@crazy-audio.com>
|
||||
Date: Thu, 16 Jan 2014 07:36:35 +0100
|
||||
Subject: [PATCH 067/423] ASoC: wm8804: Set idle_bias_off to false Idle bias
|
||||
has been change to remove warning on driver startup
|
||||
Subject: [PATCH] ASoC: wm8804: Set idle_bias_off to false Idle bias has been
|
||||
change to remove warning on driver startup
|
||||
|
||||
Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From b4efbfd86348893b2317131b7d355f64e619ab06 Mon Sep 17 00:00:00 2001
|
||||
From 8a4af475fccaff7b70b3d93ef1730001a2376063 Mon Sep 17 00:00:00 2001
|
||||
From: Gordon Garrity <gordon@iqaudio.com>
|
||||
Date: Sat, 8 Mar 2014 16:56:57 +0000
|
||||
Subject: [PATCH 068/423] Add IQaudIO Sound Card support for Raspberry Pi
|
||||
Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi
|
||||
|
||||
Set a limit of 0dB on Digital Volume Control
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 2238f04766e0b653319a3291b546ba49d651ce81 Mon Sep 17 00:00:00 2001
|
||||
From 8529e2130a7d67c7595746e5cf618e6058c3315c Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Mon, 14 Jul 2014 22:02:09 +0100
|
||||
Subject: [PATCH 069/423] hid: Reduce default mouse polling interval to 60Hz
|
||||
Subject: [PATCH] hid: Reduce default mouse polling interval to 60Hz
|
||||
|
||||
Reduces overhead when using X
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 3d116a8311017380e686bdddf80143d1a6cf885e Mon Sep 17 00:00:00 2001
|
||||
From aaa93fd9dee0084d0c2d9b50021fe7f2a2457fd7 Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Matuschek <info@crazy-audio.com>
|
||||
Date: Mon, 4 Aug 2014 10:06:56 +0200
|
||||
Subject: [PATCH 070/423] Added support for HiFiBerry DAC+
|
||||
Subject: [PATCH] Added support for HiFiBerry DAC+
|
||||
|
||||
The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses
|
||||
a different codec chip (PCM5122), therefore a new driver is necessary.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 7266f151fac2e09d08b71dc0bdd404506dc00055 Mon Sep 17 00:00:00 2001
|
||||
From 4f718b9dbd8bd3d9ce465351463b0240116f4945 Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Matuschek <info@crazy-audio.com>
|
||||
Date: Mon, 4 Aug 2014 11:09:58 +0200
|
||||
Subject: [PATCH 071/423] Added driver for HiFiBerry Amp amplifier add-on board
|
||||
Subject: [PATCH] Added driver for HiFiBerry Amp amplifier add-on board
|
||||
|
||||
The driver contains a low-level hardware driver for the TAS5713 and the
|
||||
drivers for the Raspberry Pi I2S subsystem.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 62e75253eba759318d83706ba162a14c53182ff5 Mon Sep 17 00:00:00 2001
|
||||
From 5527e5534c58f8555d699d10d2d67afc3aa768e0 Mon Sep 17 00:00:00 2001
|
||||
From: Ryan Coe <bluemrp9@gmail.com>
|
||||
Date: Sat, 31 Jan 2015 18:25:49 -0700
|
||||
Subject: [PATCH 072/423] Update ds1307 driver for device-tree support
|
||||
Subject: [PATCH] Update ds1307 driver for device-tree support
|
||||
|
||||
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
|
||||
---
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 8404a4fe589f3b7a42eb4d3e61719d76dfb83658 Mon Sep 17 00:00:00 2001
|
||||
From b19a2e678c297e81b8b9ab6db1f4775be1c678a8 Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Fri, 6 Feb 2015 13:50:57 +0000
|
||||
Subject: [PATCH 073/423] BCM270x_DT: Add pwr_led, and the required "input"
|
||||
trigger
|
||||
Subject: [PATCH] BCM270x_DT: Add pwr_led, and the required "input" trigger
|
||||
|
||||
The "input" trigger makes the associated GPIO an input. This is to support
|
||||
the Raspberry Pi PWR LED, which is driven by external hardware in normal use.
|
||||
|
@ -1,8 +1,7 @@
|
||||
From ec66f897c2625ff0764c64229b4756b0b6f88a03 Mon Sep 17 00:00:00 2001
|
||||
From 2eb050c58ca0620dd91af4e49a584118fadd9398 Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Fri, 27 Feb 2015 15:10:24 +0000
|
||||
Subject: [PATCH 074/423] enc28j60: Add device tree compatible string and an
|
||||
overlay
|
||||
Subject: [PATCH] enc28j60: Add device tree compatible string and an overlay
|
||||
|
||||
---
|
||||
drivers/net/ethernet/microchip/enc28j60.c | 7 +++++++
|
||||
|
@ -1,7 +1,7 @@
|
||||
From f48bdbd9477a98b4ab42e72c45ce7162eb09c030 Mon Sep 17 00:00:00 2001
|
||||
From bae12047250724b26ffd0acdceeede7dfe766f52 Mon Sep 17 00:00:00 2001
|
||||
From: Waldemar Brodkorb <wbrodkorb@conet.de>
|
||||
Date: Wed, 25 Mar 2015 09:26:17 +0100
|
||||
Subject: [PATCH 075/423] Add driver for rpi-proto
|
||||
Subject: [PATCH] Add driver for rpi-proto
|
||||
|
||||
Forward port of 3.10.x driver from https://github.com/koalo
|
||||
We are using a custom board and would like to use rpi 3.18.x
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 212f11d668fe451c892828d1882ddc5d8b591621 Mon Sep 17 00:00:00 2001
|
||||
From b9a95c01f53d1ae5e2e5d24682d7533ee1f487a8 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Mon, 13 Apr 2015 17:16:29 +0100
|
||||
Subject: [PATCH 076/423] config: Add default configs
|
||||
Subject: [PATCH] config: Add default configs
|
||||
|
||||
---
|
||||
arch/arm/configs/bcm2709_defconfig | 1254 +++++++++++++++++++++++++++++++++++
|
||||
|
@ -1,7 +1,7 @@
|
||||
From cc0e6881fbf29462ec038d308a655c935a9096f7 Mon Sep 17 00:00:00 2001
|
||||
From c06545159fe86fd45a9ff570e0a1b7cf04c2ebe0 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
||||
Date: Wed, 29 Apr 2015 17:24:02 +0200
|
||||
Subject: [PATCH 077/423] bcm2835: bcm2835_defconfig
|
||||
Subject: [PATCH] bcm2835: bcm2835_defconfig
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 6910ec0ffdad51f2a970f8080545c3ce621f3042 Mon Sep 17 00:00:00 2001
|
||||
From 1c0f57f0ad2d226ec0d1ef1e91a38c3abdee891a Mon Sep 17 00:00:00 2001
|
||||
From: Gordon Hollingworth <gordon@raspberrypi.org>
|
||||
Date: Tue, 12 May 2015 14:47:56 +0100
|
||||
Subject: [PATCH 078/423] rpi-ft5406: Add touchscreen driver for pi LCD display
|
||||
Subject: [PATCH] rpi-ft5406: Add touchscreen driver for pi LCD display
|
||||
|
||||
Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected
|
||||
|
||||
|
@ -1,8 +1,7 @@
|
||||
From efa4432e1c5b0a373108e2f4cefc23d882939e0c Mon Sep 17 00:00:00 2001
|
||||
From 74c81d3d8233d758e3e58f9a72dd6370d08077ac Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Mon, 13 Oct 2014 11:47:53 +0100
|
||||
Subject: [PATCH 079/423] Improve __copy_to_user and __copy_from_user
|
||||
performance
|
||||
Subject: [PATCH] Improve __copy_to_user and __copy_from_user performance
|
||||
|
||||
Provide a __copy_from_user that uses memcpy. On BCM2708, use
|
||||
optimised memcpy/memmove/memcmp/memset implementations.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 2fd2d651ece51accc95f9f9fcb8256e7d05a26df Mon Sep 17 00:00:00 2001
|
||||
From 24703d6981447867a7092997e29ac911698ec77d Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Thu, 25 Jun 2015 12:16:11 +0100
|
||||
Subject: [PATCH 080/423] gpio-poweroff: Allow it to work on Raspberry Pi
|
||||
Subject: [PATCH] gpio-poweroff: Allow it to work on Raspberry Pi
|
||||
|
||||
The Raspberry Pi firmware manages the power-down and reboot
|
||||
process. To do this it installs a pm_power_off handler, causing
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 2cba4b03311a1d55f96d6e759ffb234f67d02080 Mon Sep 17 00:00:00 2001
|
||||
From 962e7c5c04075063b86f389043dcfe1ac948a868 Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Tue, 14 Jul 2015 10:26:09 +0100
|
||||
Subject: [PATCH 081/423] spidev: Add "spidev" compatible string to silence
|
||||
warning
|
||||
Subject: [PATCH] spidev: Add "spidev" compatible string to silence warning
|
||||
|
||||
See: https://github.com/raspberrypi/linux/issues/1054
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 48bbf5d241136bc7cf19db80aeb4b09040dde4da Mon Sep 17 00:00:00 2001
|
||||
From cd035dbd2c541ab1f517f79d6b7c54948a91ed8b Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Tue, 14 Jul 2015 17:00:18 +0100
|
||||
Subject: [PATCH 082/423] scripts/dtc: Add overlay support
|
||||
Subject: [PATCH] scripts/dtc: Add overlay support
|
||||
|
||||
---
|
||||
scripts/dtc/checks.c | 119 ++-
|
||||
|
@ -1,7 +1,7 @@
|
||||
From cb1da07eaac82084fe16f086989d98b5590a4d61 Mon Sep 17 00:00:00 2001
|
||||
From 2b475b95bcf5487bd23b7a636ce36fae98f6e81a Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <pelwell@users.noreply.github.com>
|
||||
Date: Tue, 14 Jul 2015 14:32:47 +0100
|
||||
Subject: [PATCH 083/423] mfd: Add Raspberry Pi Sense HAT core driver
|
||||
Subject: [PATCH] mfd: Add Raspberry Pi Sense HAT core driver
|
||||
|
||||
---
|
||||
drivers/input/joystick/Kconfig | 8 +
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 10cbc09000e1d326cff1273f92423c30f9a848a9 Mon Sep 17 00:00:00 2001
|
||||
From 89afb4f891b10c2f736cfac22f274e33ebc5256e Mon Sep 17 00:00:00 2001
|
||||
From: Jan Grulich <jan@grulich.eu>
|
||||
Date: Mon, 24 Aug 2015 16:03:47 +0100
|
||||
Subject: [PATCH 084/423] RaspiDAC3 support
|
||||
Subject: [PATCH] RaspiDAC3 support
|
||||
|
||||
Signed-off-by: Jan Grulich <jan@grulich.eu>
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From dcfb4303fbbc327ec5f1b990d12c79384cd5a8db Mon Sep 17 00:00:00 2001
|
||||
From d182e9b8453b663bb0c75f73e1791bf78f2d4bcc Mon Sep 17 00:00:00 2001
|
||||
From: Jan Grulich <jan@grulich.eu>
|
||||
Date: Mon, 24 Aug 2015 16:02:34 +0100
|
||||
Subject: [PATCH 085/423] tpa6130a2: Add headphone switch control
|
||||
Subject: [PATCH] tpa6130a2: Add headphone switch control
|
||||
|
||||
Signed-off-by: Jan Grulich <jan@grulich.eu>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 20bc23d5669c1a70a03db60768eb3d4b100a658f Mon Sep 17 00:00:00 2001
|
||||
From 80bd42a96b7c6a20219803609651acd9e49f4db6 Mon Sep 17 00:00:00 2001
|
||||
From: popcornmix <popcornmix@gmail.com>
|
||||
Date: Mon, 28 Sep 2015 23:38:59 +0100
|
||||
Subject: [PATCH 086/423] irq-bcm2835: Fix building with 2708
|
||||
Subject: [PATCH] irq-bcm2835: Fix building with 2708
|
||||
|
||||
---
|
||||
drivers/irqchip/irq-bcm2835.c | 3 ++-
|
||||
|
@ -1,7 +1,7 @@
|
||||
From cabbd4561f8a04b087fb867cedb002cd5170375f Mon Sep 17 00:00:00 2001
|
||||
From a8124cba46bd8d4d8fdf9e09fe3046b01ff21c42 Mon Sep 17 00:00:00 2001
|
||||
From: P33M <P33M@github.com>
|
||||
Date: Wed, 21 Oct 2015 14:55:21 +0100
|
||||
Subject: [PATCH 087/423] rpi_display: add backlight driver and overlay
|
||||
Subject: [PATCH] rpi_display: add backlight driver and overlay
|
||||
|
||||
Add a mailbox-driven backlight controller for the Raspberry Pi DSI
|
||||
touchscreen display. Requires updated GPU firmware to recognise the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c0af79182427336015c026314b7c35a82c24b7aa Mon Sep 17 00:00:00 2001
|
||||
From 7e7500431515d41e1498cef0984ef6f9b91cac67 Mon Sep 17 00:00:00 2001
|
||||
From: Matthias Reichl <hias@horus.com>
|
||||
Date: Mon, 16 Nov 2015 14:05:35 +0000
|
||||
Subject: [PATCH 088/423] bcm2835-dma: Fix up convert to DMA pool
|
||||
Subject: [PATCH] bcm2835-dma: Fix up convert to DMA pool
|
||||
|
||||
---
|
||||
drivers/dma/bcm2835-dma.c | 36 ++++++++++++++++++++++++++----------
|
||||
|
@ -1,8 +1,7 @@
|
||||
From 644468c76c90757811b1490557d7fa1ab8e9477b Mon Sep 17 00:00:00 2001
|
||||
From 93ede86bcccc686cdc933e0711289b0312f0361a Mon Sep 17 00:00:00 2001
|
||||
From: Phil Elwell <phil@raspberrypi.org>
|
||||
Date: Wed, 11 Nov 2015 11:38:59 +0000
|
||||
Subject: [PATCH 089/423] scripts: Multi-platform support for mkknlimg and
|
||||
knlinfo
|
||||
Subject: [PATCH] scripts: Multi-platform support for mkknlimg and knlinfo
|
||||
|
||||
The firmware uses tags in the kernel trailer to choose which dtb file
|
||||
to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true,
|
||||
|
@ -1,8 +1,7 @@
|
||||
From b2366bf5c6c6c13d7d3b0e7099c6e71f4f775df6 Mon Sep 17 00:00:00 2001
|
||||
From a70ea1cd22e9b4e7278dfea3b2d6fb87e8902ca3 Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Mon, 2 Mar 2015 13:01:12 -0800
|
||||
Subject: [PATCH 090/423] drm/vc4: Add suport for 3D rendering using the V3D
|
||||
engine.
|
||||
Subject: [PATCH] drm/vc4: Add suport for 3D rendering using the V3D engine.
|
||||
|
||||
This is a squash of the out-of-tree development series. Since that
|
||||
series contained code from the first "get a demo triangle rendered
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ffe4a5fe0c4dfb0c58193b6ff2e5e7eb37b350ad Mon Sep 17 00:00:00 2001
|
||||
From 1c356bdfac710d5427cfeac2ce2216d0bb17a6db Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Wed, 14 Oct 2015 11:32:14 -0700
|
||||
Subject: [PATCH 091/423] drm/vc4: Force HDMI to connected.
|
||||
Subject: [PATCH] drm/vc4: Force HDMI to connected.
|
||||
|
||||
For some reason on the downstream tree, the HPD GPIO isn't working.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ac56795420156559b5381fbf4ad1f607baca2935 Mon Sep 17 00:00:00 2001
|
||||
From 99cab11df7185247a24977d8cbcf5d660d0f861b Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Mon, 19 Oct 2015 08:23:18 -0700
|
||||
Subject: [PATCH 092/423] drm/vc4: bo cache locking fixes.
|
||||
Subject: [PATCH] drm/vc4: bo cache locking fixes.
|
||||
|
||||
Signed-off-by: Eric Anholt <eric@anholt.net>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 0ff2836cb0c35edfaa40124957f5884527bd4c1e Mon Sep 17 00:00:00 2001
|
||||
From beac608ce63d6537a89f3de8080a1c2d16aa1a4c Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Mon, 19 Oct 2015 08:29:41 -0700
|
||||
Subject: [PATCH 093/423] drm/vc4: bo cache locking cleanup.
|
||||
Subject: [PATCH] drm/vc4: bo cache locking cleanup.
|
||||
|
||||
Signed-off-by: Eric Anholt <eric@anholt.net>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 616e0a78750f2c92c52ac7f6638a8f5a901afdaf Mon Sep 17 00:00:00 2001
|
||||
From 454b9dabe51753598732a2d91f742abdd82f3b18 Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Mon, 19 Oct 2015 08:32:24 -0700
|
||||
Subject: [PATCH 094/423] drm/vc4: Use job_lock to protect seqno_cb_list.
|
||||
Subject: [PATCH] drm/vc4: Use job_lock to protect seqno_cb_list.
|
||||
|
||||
We're (mostly) not supposed to be using struct_mutex in drivers these
|
||||
days.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c554ca947004989217c25487dfadedd633928dc3 Mon Sep 17 00:00:00 2001
|
||||
From 72634a2adb667d991249e66e691878cd7e7722a0 Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Mon, 19 Oct 2015 08:44:35 -0700
|
||||
Subject: [PATCH 095/423] drm/vc4: Drop struct_mutex around CL validation.
|
||||
Subject: [PATCH] drm/vc4: Drop struct_mutex around CL validation.
|
||||
|
||||
We were using it so that we could make sure that shader validation
|
||||
state didn't change while we were validating, but now shader
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c43a9027e42856592c071e5bbc7e38e8f236ce51 Mon Sep 17 00:00:00 2001
|
||||
From 81fcdac0b54488a1fea35a0fe2e799511888fa84 Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Mon, 19 Oct 2015 08:44:35 -0700
|
||||
Subject: [PATCH 096/423] drm/vc4: Drop struct_mutex around CL validation.
|
||||
Subject: [PATCH] drm/vc4: Drop struct_mutex around CL validation.
|
||||
|
||||
We were using it so that we could make sure that shader validation
|
||||
state didn't change while we were validating, but now shader
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ea5d1ac38aba536dcd088cbf8eae229e4651ccbd Mon Sep 17 00:00:00 2001
|
||||
From 593759c954e9ac7b237bb4e2136a12952ae107d0 Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Tue, 20 Oct 2015 13:59:15 +0100
|
||||
Subject: [PATCH 097/423] drm/vc4: Add support for more display plane formats.
|
||||
Subject: [PATCH] drm/vc4: Add support for more display plane formats.
|
||||
|
||||
Signed-off-by: Eric Anholt <eric@anholt.net>
|
||||
---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 910b5fa15403115a76d5ee2a4f7932b051454e9c Mon Sep 17 00:00:00 2001
|
||||
From ab2cd74a31d3da208cc6264ab79c1c0ee503498d Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Fri, 23 Oct 2015 12:31:56 +0100
|
||||
Subject: [PATCH 098/423] drm/vc4: No need to stop the stopped threads.
|
||||
Subject: [PATCH] drm/vc4: No need to stop the stopped threads.
|
||||
|
||||
This was leftover debug code from the hackdriver. We never submit
|
||||
unless the thread is already idle.
|
||||
|
@ -1,8 +1,7 @@
|
||||
From bc2764818666e6b24c4dc41e65a472a3fd0bdd74 Mon Sep 17 00:00:00 2001
|
||||
From 7ab57c24a8c094163c2a5da180edbba0c45b5765 Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Fri, 23 Oct 2015 12:33:43 +0100
|
||||
Subject: [PATCH 099/423] drm/vc4: Remove extra barrier()s aroudn CTnCA/CTnEA
|
||||
setup.
|
||||
Subject: [PATCH] drm/vc4: Remove extra barrier()s aroudn CTnCA/CTnEA setup.
|
||||
|
||||
The writel() that these expand to already does barriers.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From b474d69ad1b4e5032c565868082e36f64854106e Mon Sep 17 00:00:00 2001
|
||||
From b1cfa411e68e4afc1d8bedda4ae1924108a5c2fa Mon Sep 17 00:00:00 2001
|
||||
From: Eric Anholt <eric@anholt.net>
|
||||
Date: Fri, 23 Oct 2015 14:57:22 +0100
|
||||
Subject: [PATCH 100/423] drm/vc4: Fix a typo in a V3D debug register.
|
||||
Subject: [PATCH] drm/vc4: Fix a typo in a V3D debug register.
|
||||
|
||||
Signed-off-by: Eric Anholt <eric@anholt.net>
|
||||
---
|
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user