openwrt/target/linux/ath79
Koen Vandeputte 6561ca1fa5 ath79: ar934x: fix mounting issues if subpage is not supported
Currently, the option to disable subpage writing is only set
when a HW ECC engine is used.

Some boards lack a HW ECC engine and use software for that.
In this case, this NAND option does not get set when the NAND chip
does not support it, resulting in mounting errors.

Move the setting of this option to a generic init location so it
gets set for all types where required.

While at it, also OR the option instead of just setting it
so we don't overwrite potential flags being set somewhere else.

Before:

[    1.681273] UBI: auto-attach mtd2
[    1.684669] ubi0: attaching mtd2
[    1.688877] ubi0 error: validate_ec_hdr: bad VID header offset 2048, expected 512
[    1.696469] ubi0 error: validate_ec_hdr: bad EC header
[    1.701712] Erase counter header dump:
[    1.705512]  magic          0x55424923
[    1.709322]  version        1
[    1.712330]  ec             1
[    1.715331]  vid_hdr_offset 2048
[    1.718610]  data_offset    4096
[    1.721880]  image_seq      1462320675
[    1.725680]  hdr_crc        0x12255a15

After:

    1.680917] UBI: auto-attach mtd2
[    1.684308] ubi0: attaching mtd2
[    2.954504] random: crng init done
[    3.142813] ubi0: scanning is finished
[    3.163455] ubi0: attached mtd2 (name "ubi", size 124 MiB)
[    3.169069] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.176037] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.182942] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.190013] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0
[    3.196102] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    3.203434] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1462320675
[    3.212700] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20
[    3.222124] ubi0: background thread "ubi_bgt0d" started, PID 317
[    3.230246] block ubiblock0_1: created from ubi0:1(rootfs)
[    3.235819] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[    3.256830] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2021-06-21 10:48:27 +02:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add WiFi migration for AR913x 2020-09-28 16:23:03 +02:00
dts ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD 2021-06-21 10:48:27 +02:00
files ath79: ar934x: fix mounting issues if subpage is not supported 2021-06-21 10:48:27 +02:00
generic ath79: add support for TP-Link TL-WR841HP v3 2021-06-13 23:30:05 +02:00
image ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD 2021-06-21 10:48:27 +02:00
mikrotik ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD 2021-06-21 10:48:27 +02:00
nand treewide: remove "+" sign for increment with macaddr_add 2021-06-05 23:54:37 +02:00
patches-5.4 ath79: add NAND driver for MikroTik RB91xG series 2021-06-21 10:48:27 +02:00
patches-5.10 ath79: add NAND driver for MikroTik RB91xG series 2021-06-21 10:48:27 +02:00
tiny ath79: consolidate testing kernel 2021-04-10 19:28:04 +02:00
config-5.4 ath79: enable Regulator support for target 2021-02-22 00:57:25 +01:00
config-5.10 ath79: add missing kernel config symbol 2021-04-25 13:18:35 +03:00
Makefile ath79: consolidate testing kernel 2021-04-10 19:28:04 +02:00
modules.mk