openwrt/target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "snr,snr-cpe-me2-sfp", "mediatek,mt7621-soc";
	model = "SNR-CPE-ME2-SFP";

	aliases {
		led-boot = &led_sys;
		led-failsafe = &led_sys;
		led-running = &led_sys;
		led-upgrade = &led_sys;
	};

	leds {
		compatible = "gpio-leds";

		led_sys: sys {
			label = "green:sys";
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};

		vpn {
			label = "green:vpn";
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
		};

		usb {
			label = "green:usb";
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_USB;
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
			trigger-sources = <&xhci_ehci_port1>;
			linux,default-trigger = "usbport";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	sfp_wan: sfp0 {
		compatible = "sff,sfp";
		i2c-bus = <&i2c>;
		los-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
		mod-def0-gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
		tx-disable-gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
		maximum-power-milliwatt = <1000>;
	};

	reg_usb_vbus: regulator-usb {
		compatible = "regulator-fixed";
		regulator-name = "usb_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio 17 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_3p3v: regulator-3p3v {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&state_default {
	gpio {
		groups = "uart2", "uart3", "jtag";
		function = "gpio";
	};
};

&spi0 {
	status = "okay";

	flash@0 { // GD25Q127CSIG
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <44000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "config";
				reg = <0x30000 0x10000>;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0xfb0000>;
			};

			partition@30001 {
				label = "uboot-env";
				reg = <0x30000 0x1000>;
			};
		};
	};
};

&gpio {
	// driver issue, bypass
	enable_sfp {
		gpio-hog;
		gpios = <9 GPIO_ACTIVE_LOW>;
		output-low;
	};
};

&mdio {
	phy_sfp: ethernet-phy@0 {
		reg = <0>;
		sfp = <&sfp_wan>;
	};
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_e000>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-mode = "rgmii-rxid";
	phy-handle = <&phy_sfp>;

	nvmem-cells = <&macaddr_factory_e006>;
	nvmem-cell-names = "mac-address";
};

&switch0 {
	ports {
		port@1 {
			status = "okay";
			label = "lan1";
		};

		port@2 {
			status = "okay";
			label = "lan2";
		};

		port@3 {
			status = "okay";
			label = "lan3";
		};

		port@4 {
			status = "okay";
			label = "lan4";
		};
	};
};

&xhci {
	vusb33-supply = <&reg_3p3v>;
	vbus-supply = <&reg_usb_vbus>;
};

&pcie {
	status = "okay";
};

&pcie0 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x0000>;
	};
};

&factory {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_factory_e000: macaddr@e000 {
		reg = <0xe000 0x6>;
	};

	macaddr_factory_e006: macaddr@e006 {
		reg = <0xe006 0x6>;
	};
};