mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
ramips: add support for SNR-CPE-ME2-SFP
SNR-CPE-ME2-SFP is a wireless router with SFP cage manufactured by SNR/NAG company. Specification: - SoC: MediaTek MT7621A - CPU: 880MHz - Flash: 16 MB (GD25Q127CSIG) - RAM: 256 MB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7615DN) - Ethernet: 4x 10/100/1000 Mbps - SFP cage (using RTL8211FS-CG) - USB 3.0 port - Power: 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME2 to recovery mode (press reset button and power on device, hold button for ~10 seconds) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface MAC Addresses(stock) -------------------- +----------+------------------+-------------------+ | use | address | example | +----------+------------------+-------------------+ | Device | label | 6A:C4:DD:xx:xx:28 | | Ethernet | + 1 | 6A:C4:DD:xx:xx:29 | | 2g | + 2 | 6A:C4:DD:xx:xx:2A | | 5g | + 3 | 6A:C4:DD:xx:xx:2B | +----------+------------------+-------------------+ Notes: - Reading sfp eeprom is not supported [1] (driver issue). Stock image has the same situation. References: 1. https://forum.openwrt.org/t/mt7621-and-reading-sfp-eeprom/152249 Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
This commit is contained in:
Aleksey Nasibulin
Hauke Mehrtens
parent
bf055fcdca
commit
d45659a571
@ -85,6 +85,7 @@ linksys,ea8100-v2|\
|
||||
mts,wg430223)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
|
||||
;;
|
||||
snr,snr-cpe-me2-sfp|\
|
||||
snr,cpe-w4n-mt)
|
||||
idx="$(find_mtd_index uboot-env)"
|
||||
[ -n "$idx" ] && \
|
||||
|
||||
219
target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts
Normal file
219
target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-sfp.dts
Normal file
@ -0,0 +1,219 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "snr,snr-cpe-me2-sfp", "mediatek,mt7621-soc";
|
||||
model = "SNR-CPE-ME2-SFP";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_sys;
|
||||
led-failsafe = &led_sys;
|
||||
led-running = &led_sys;
|
||||
led-upgrade = &led_sys;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_sys: sys {
|
||||
label = "green:sys";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vpn {
|
||||
label = "green:vpn";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "green:usb";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_USB;
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&xhci_ehci_port1>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
sfp_wan: sfp0 {
|
||||
compatible = "sff,sfp";
|
||||
i2c-bus = <&i2c>;
|
||||
los-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
|
||||
mod-def0-gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
tx-disable-gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
|
||||
maximum-power-milliwatt = <1000>;
|
||||
};
|
||||
|
||||
reg_usb_vbus: regulator-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "uart2", "uart3", "jtag";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 { // GD25Q127CSIG
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <44000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
|
||||
partition@30001 {
|
||||
label = "uboot-env";
|
||||
reg = <0x30000 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
// driver issue, bypass
|
||||
enable_sfp {
|
||||
gpio-hog;
|
||||
gpios = <9 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
phy_sfp: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
sfp = <&sfp_wan>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&phy_sfp>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_e006>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_usb_vbus>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_e000: macaddr@e000 {
|
||||
reg = <0xe000 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_e006: macaddr@e006 {
|
||||
reg = <0xe006 0x6>;
|
||||
};
|
||||
};
|
||||
@ -1963,6 +1963,18 @@ define Device/snr_snr-cpe-me2-lite
|
||||
endef
|
||||
TARGET_DEVICES += snr_snr-cpe-me2-lite
|
||||
|
||||
define Device/snr_snr-cpe-me2-sfp
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := SNR
|
||||
DEVICE_MODEL := SNR-CPE-ME2-SFP
|
||||
UIMAGE_NAME := $$(DEVICE_MODEL)
|
||||
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
|
||||
kmod-sfp kmod-usb-ledtrig-usbport uboot-envtools
|
||||
endef
|
||||
TARGET_DEVICES += snr_snr-cpe-me2-sfp
|
||||
|
||||
define Device/storylink_sap-g3200u3
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 7872k
|
||||
|
||||
@ -139,6 +139,10 @@ case "$board" in
|
||||
macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
|
||||
> /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
snr,snr-cpe-me2-sfp)
|
||||
hw_mac_addr="$(mtd_get_mac_binary factory 0x8004)"
|
||||
[ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tenbay,t-mb5eu-v01)
|
||||
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
|
||||
|
||||
Loading…
Reference in New Issue
Block a user