Christian Lamparter 5ae45dc7b3 ipq40xx: GL-B1300: convert to new partitions layout ... Alberto Bursi reported: >The patch "ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300" >prevents boot on my B1300. I compiled from latest sources. The GL-B1300 was using the discouraged direct subnodes method to declare the partitions on the flash. |The partition table should be a subnode of the flash node and should be named |'partitions'. This node should have the following property: |- compatible : (required) must be "fixed-partitions" |Partitions are then defined in subnodes of the partitions node. | |For backwards compatibility partitions as direct subnodes of the flash device are |supported. This use is discouraged. |NOTE: also for backwards compatibility, direct subnodes that have a compatible |string are not considered partitions, as they may be used for other bindings. <https://www.kernel.org/doc/Documentation/devicetree/bindings/mtd/partition.txt> Hence, this patch converts the device to the "partitions" layout. Fixes: 1cbe457cf9 ("ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300") Reported-by: Alberto Bursi <bobafetthotmail@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>		2018-12-17 14:22:28 +01:00
..
base-files	ipq40xx: integrate ath10kcal_patch_mac into ath10kcal_patch_mac_crc	2018-12-15 19:02:00 +01:00
files-4.14/arch/arm/boot/dts	ipq40xx: GL-B1300: convert to new partitions layout	2018-12-17 14:22:28 +01:00
image	ipq40xx: add support for EnGenius EAP1300	2018-12-05 09:40:32 +01:00
patches-4.14	ipq40xx: device-tree overhaul	2018-12-17 00:21:34 +01:00
profiles	ipq40xx: add target	2018-03-14 19:04:50 +01:00
config-4.14	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
Makefile	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00