mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-14 06:27:03 +00:00
5ae45dc7b3
Alberto Bursi reported: >The patch "ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300" >prevents boot on my B1300. I compiled from latest sources. The GL-B1300 was using the discouraged direct subnodes method to declare the partitions on the flash. |The partition table should be a subnode of the flash node and should be named |'partitions'. This node should have the following property: |- compatible : (required) must be "fixed-partitions" |Partitions are then defined in subnodes of the partitions node. | |For backwards compatibility partitions as direct subnodes of the flash device are |supported. This use is discouraged. |NOTE: also for backwards compatibility, direct subnodes that have a compatible |string are not considered partitions, as they may be used for other bindings. <https://www.kernel.org/doc/Documentation/devicetree/bindings/mtd/partition.txt> Hence, this patch converts the device to the "partitions" layout. Fixes: 1cbe457cf94 ("ipq40xx: specify "firmware" partition format for GL.iNet GL-B1300") Reported-by: Alberto Bursi <bobafetthotmail@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org