mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
76e419288f
```
Specifications:
* CPU: Qualcomm IPQ8072A, SoC Version: 2.0, Quad core Cortex-A53 1.6896 GHz
* RAM: 1 GiB of DDR4 600 MHz
* Flash: NAND 2x256 MiB (Macronix MX30UF2G18AC)
* 4 RGB LEDs: Power, LAN, 2.4GHz and 5GHz
* UART: Two 4-pin unpopulated headers under the LEDs.
Use the header closest to LED 4 and 5.
They are marked with a white stroke.
TX RX GND, beginning from "4". 115200n8.
Lan:
* One 100/1000/2.5GBASE-T Gigabit Ethernet (QCA8081)
Wlan:
* 4x4 in 2.4GHz: 802.11b/g/n/ax
* 4x4 in 5.0GHz: 802.11a/n/ac/ax
* OFDM and OFDMA
* Bidir and MU-MIMO
* Internal antenna 3.1/4.3 dBi (2.4GHz/5GHz)
Power:
* PoE+ 802.3at/af 25.5W
* DC 12V 2.5A
```
```
Note: The OpenWrt image is setup with DHCP and not a static IP.
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
2. Connect to console on the AP, and connect the LAN port to your LAN
3. Stop auto boot to get to U-boot shell, interrupt the autoboot process by pressing '0' when prompted
4. Set active_fw in env
# setenv active_fw 1
5. Transfer the initramfs image with TFTP
# setenv serverip 192.168.1.10 (IP of TFTP server host)
# setenv ipaddr 192.168.1.1 (IP used by the router for getting the image, must be in the same subnet as the TFTP host)
# tftpboot openwrt-qualcommax-ipq807x-netgear_wax620-initramfs-uImage.itb
6. Reboot and load the image
# bootm
7. SCP factory image to the AP
# scp openwrt-qualcommax-ipq807x-netgear_wax620-squashfs-factory.ubi root@192.168.1.1:/tmp/
8. Connect to device using SSH (use the LAN port)
9. Flash squashfs-factory.ubi from within the initramfs instance of OpenWRT
Before you flash, please check your mtd partitions where mtdX is the right mtd rootfs partition.
# cat /proc/mtd (To check MTD partitions)
# ubiformat /dev/mtd19 -y -f /tmp/openwrt-qualcommax-ipq807x-netgear_wax620-squashfs-factory.ubi
10. Set active_fw to 0
# /usr/sbin/fw_setenv active_fw 0
11. Reboot the AP and your done
# reboot
```
Signed-off-by: Kristian Skramstad <kristian+github@83.no>
229 lines
6.3 KiB
Makefile
229 lines
6.3 KiB
Makefile
define Device/FitImage
|
|
KERNEL_SUFFIX := -uImage.itb
|
|
KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/FitImageLzma
|
|
KERNEL_SUFFIX := -uImage.itb
|
|
KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := Image
|
|
endef
|
|
|
|
define Device/EmmcImage
|
|
IMAGES += factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
|
|
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/UbiFit
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := factory.ubi sysupgrade.bin
|
|
IMAGE/factory.ubi := append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/buffalo_wxr-5950ax12
|
|
$(call Device/FitImage)
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WXR-5950AX12
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
SOC := ipq8074
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-5950ax12
|
|
|
|
define Device/compex_wpq873
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPQ873
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk09.wpq873
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES := ipq-wifi-compex_wpq873
|
|
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
|
|
endef
|
|
TARGET_DEVICES += compex_wpq873
|
|
|
|
define Device/dynalink_dl-wrx36
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Dynalink
|
|
DEVICE_MODEL := DL-WRX36
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
|
|
endef
|
|
TARGET_DEVICES += dynalink_dl-wrx36
|
|
|
|
define Device/edgecore_eap102
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := EAP102
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac02
|
|
SOC := ipq8071
|
|
DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
|
|
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
|
|
endef
|
|
TARGET_DEVICES += edgecore_eap102
|
|
|
|
define Device/edimax_cax1800
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := CAX1800
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac03
|
|
SOC := ipq8070
|
|
DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
|
|
endef
|
|
TARGET_DEVICES += edimax_cax1800
|
|
|
|
define Device/netgear_rax120v2
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := RAX120v2
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
SOC := ipq8074
|
|
KERNEL_SIZE := 29696k
|
|
NETGEAR_BOARD_ID := RAX120
|
|
NETGEAR_HW_ID := 29765589+0+512+1024+4x4+8x8
|
|
DEVICE_PACKAGES := ipq-wifi-netgear_rax120v2 kmod-spi-gpio \
|
|
kmod-spi-bitbang kmod-gpio-nxp-74hc164 kmod-hwmon-g761
|
|
IMAGES = web-ui-factory.img sysupgrade.bin
|
|
IMAGE/web-ui-factory.img := append-image initramfs-uImage.itb | \
|
|
pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | \
|
|
netgear-dni
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
|
|
append-metadata
|
|
endef
|
|
TARGET_DEVICES += netgear_rax120v2
|
|
|
|
define Device/netgear_wax620
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := WAX620
|
|
DEVICE_DTS_CONFIG := config@hk07
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES += kmod-spi-gpio kmod-gpio-nxp-74hc164 \
|
|
ipq-wifi-netgear_wax620
|
|
endef
|
|
TARGET_DEVICES += netgear_wax620
|
|
|
|
define Device/netgear_wax218
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
ARTIFACTS := web-ui-factory.fit
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := WAX218
|
|
DEVICE_DTS_CONFIG := config@hk07
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SOC := ipq8072
|
|
ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
|
|
ubinize-kernel | qsdk-ipq-factory-nand
|
|
DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
|
|
ipq-wifi-netgear_wax218
|
|
endef
|
|
TARGET_DEVICES += netgear_wax218
|
|
|
|
define Device/prpl_haze
|
|
$(call Device/FitImage)
|
|
$(call Device/EmmcImage)
|
|
DEVICE_VENDOR := prpl Foundation
|
|
DEVICE_MODEL := Haze
|
|
DEVICE_DTS_CONFIG := config@hk09
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \
|
|
mkf2fs f2fsck kmod-fs-f2fs
|
|
endef
|
|
TARGET_DEVICES += prpl_haze
|
|
|
|
define Device/qnap_301w
|
|
$(call Device/FitImage)
|
|
$(call Device/EmmcImage)
|
|
DEVICE_VENDOR := QNAP
|
|
DEVICE_MODEL := 301w
|
|
DEVICE_DTS_CONFIG := config@hk01
|
|
KERNEL_SIZE := 16384k
|
|
SOC := ipq8072
|
|
DEVICE_PACKAGES += ipq-wifi-qnap_301w
|
|
endef
|
|
TARGET_DEVICES += qnap_301w
|
|
|
|
define Device/redmi_ax6
|
|
$(call Device/xiaomi_ax3600)
|
|
DEVICE_VENDOR := Redmi
|
|
DEVICE_MODEL := AX6
|
|
DEVICE_PACKAGES := ipq-wifi-redmi_ax6
|
|
endef
|
|
TARGET_DEVICES += redmi_ax6
|
|
|
|
define Device/xiaomi_ax3600
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := AX3600
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@ac04
|
|
SOC := ipq8071
|
|
KERNEL_SIZE := 36608k
|
|
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_ax3600
|
|
|
|
define Device/xiaomi_ax9000
|
|
$(call Device/FitImage)
|
|
$(call Device/UbiFit)
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := AX9000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_DTS_CONFIG := config@hk14
|
|
SOC := ipq8072
|
|
KERNEL_SIZE := 57344k
|
|
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
|
|
kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_ax9000
|
|
|
|
define Device/zyxel_nbg7815
|
|
$(call Device/FitImage)
|
|
$(call Device/EmmcImage)
|
|
DEVICE_VENDOR := ZYXEL
|
|
DEVICE_MODEL := NBG7815
|
|
DEVICE_DTS_CONFIG := config@nbg7815
|
|
SOC := ipq8074
|
|
DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
|
|
kmod-bluetooth
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg7815
|