ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
58b3b557b6
openwrt/target/linux/mediatek/image/mt7622.mk
INAGAKI Hiroshi 58b3b557b6 mediatek: mt7622: add support for ELECOM WRC-X3200GST3 
ELECOM WRC-X3200GST3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
MT7622B.

Specifications:

- SoC		: MediaTek MT7622B
- RAM		: DDR3 512 MiB (Nanya NT5CC256M16ER-EK)
- Flash		: SPI-NAND 128 MiB (Winbond W25N01GVZEIG)
- WLAN		: 2.4/5 GHz 4T4R
  - 2.4 GHz	: MediaTek MT7622B (SoC)
  - 5 GHz	: MediaTek MT7915A
- Ethernet	: 5x 10/100/1000 Mbps
  - Switch	: MediaTek MT7531
- LEDs/Keys	: 6x/4x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J19: 3.3V, GND, TX, RX from power jack side
  - 115200n8
- Power		: 12 VDC, 1.5 A

Flash instruction using factory image:

1. Boot WRC-X3200GST3 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

MAC Addresses:

LAN    : 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex))
WAN    : 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex))
2.4 GHz: 04:AB:18:xx:xx:79 (Factory, 0x4     (hex))
5 GHz  : 04:AB:18:xx:xx:7A (none)

Note:

- currently, there is no "phy1tpt" trigger for 5 GHz wlan (MT7915) in
  "trigger" file of LEDs, use "phy1radio" trigger instead

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2022-05-21 22:27:01 +01:00

292 lines
9.5 KiB
Makefile
Raw Blame History

DTS_DIR := $(DTS_DIR)/mediatek
ifdef CONFIG_LINUX_5_4
KERNEL_LOADADDR := 0x44080000
else
KERNEL_LOADADDR := 0x44000000
endif
define Image/Prepare
# For UBI we want only one extra block
rm -f $(KDIR)/ubi_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
define Build/buffalo-kernel-trx
$(eval magic=$(word 1,$(1)))
$(eval dummy=$(word 2,$(1)))
$(eval kern_size=$(if $(KERNEL_SIZE),$(KERNEL_SIZE),0x400000))
$(if $(dummy),touch $(dummy))
$(STAGING_DIR_HOST)/bin/otrx create $@.new \
$(if $(magic),-M $(magic),) \
-f $@ \
$(if $(dummy),\
-a 0x20000 \
-b $$(( $(subst k, * 1024,$(kern_size)) )) \
-f $(dummy),)
mv $@.new $@
endef
define Build/bl2
cat $(STAGING_DIR_IMAGE)/mt7622-$1-bl2.img >> $@
endef
define Build/bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@
endef
define Build/mt7622-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
$(if $(findstring sdmmc,$1), \
-H \
-t 0x83 -N bl2 -r -p 512k@512k \
) \
-t 0xef -N fip -r -p 2M@2M \
-t 0x83 -N ubootenv -r -p 1M@4M \
-N recovery -r -p 32M@6M \
$(if $(findstring sdmmc,$1), \
-N install -r -p 7M@38M \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@45M \
) \
$(if $(findstring emmc,$1), \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@40M \
)
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/trx-nand
# kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
# if it grows up between releases
# root: UBI with one extra block containing UBI mark to trigger erasing
# rest of partition
$(STAGING_DIR_HOST)/bin/otrx create $@.new \
-M 0x32504844 \
-f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
-f $@ \
-A $(KDIR)/ubi_mark -a 0x20000
mv $@.new $@
endef
define Device/bananapi_bpi-r64
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R64
DEVICE_DTS := mt7622-bananapi-bpi-r64
DEVICE_DTS_OVERLAY := mt7622-bananapi-bpi-r64-pcie1 mt7622-bananapi-bpi-r64-sata
DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3 e2fsprogs mkf2fs f2fsck
ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip sdcard.img.gz snand-preloader.bin snand-bl31-uboot.fip
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACT/emmc-preloader.bin := bl2 emmc-2ddr
ARTIFACT/emmc-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-emmc
ARTIFACT/snand-preloader.bin := bl2 snand-2ddr
ARTIFACT/snand-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-snand
ARTIFACT/sdcard.img.gz := mt7622-gpt sdmmc |\
pad-to 512k | bl2 sdmmc-2ddr |\
pad-to 2048k | bl31-uboot bananapi_bpi-r64-sdmmc |\
pad-to 6144k | append-image-stage initramfs-recovery.itb |\
pad-to 38912k | mt7622-gpt emmc |\
pad-to 39424k | bl2 emmc-2ddr |\
pad-to 40960k | bl31-uboot bananapi_bpi-r64-emmc |\
pad-to 43008k | bl2 snand-2ddr |\
pad-to 43520k | bl31-uboot bananapi_bpi-r64-snand |\
pad-to 46080k | append-image squashfs-sysupgrade.itb | gzip
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb with-initrd | pad-to 128k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb external-static-with-rootfs | append-metadata
endef
TARGET_DEVICES += bananapi_bpi-r64
define Device/buffalo_wsr-2533dhp2
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-2533DHP2
DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
DEVICE_DTS_DIR := ../dts
IMAGE_SIZE := 59392k
KERNEL_SIZE := 4096k
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
UBINIZE_OPTS := -E 5
BUFFALO_TAG_PLATFORM := MTK
BUFFALO_TAG_VERSION := 9.99
BUFFALO_TAG_MINOR := 9.99
IMAGES += factory.bin factory-uboot.bin
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
buffalo-kernel-trx
IMAGE/factory.bin := append-ubi | trx-nand | \
buffalo-enc WSR-2533DHP2 $$(BUFFALO_TAG_VERSION) -l | \
buffalo-tag-dhp WSR-2533DHP2 JP JP | buffalo-enc-tag -l | buffalo-dhp-image
IMAGE/factory-uboot.bin := append-ubi | trx-nand
IMAGE/sysupgrade.bin := append-kernel | \
buffalo-kernel-trx 0x32504844 $(KDIR)/tmp/$$(DEVICE_NAME).null | \
sysupgrade-tar kernel=$$$$@ | append-metadata
DEVICE_PACKAGES := swconfig
endef
TARGET_DEVICES += buffalo_wsr-2533dhp2
define Device/elecom_wrc-2533gent
DEVICE_VENDOR := Elecom
DEVICE_MODEL := WRC-2533GENT
DEVICE_DTS := mt7622-elecom-wrc-2533gent
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-btmtkuart kmod-usb3 swconfig
endef
TARGET_DEVICES += elecom_wrc-2533gent
define Device/elecom_wrc-x3200gst3
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-X3200GST3
DEVICE_DTS := mt7622-elecom-wrc-x3200gst3
DEVICE_DTS_DIR := ../dts
IMAGE_SIZE := 25600k
KERNEL_SIZE := 6144k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | \
elecom-wrc-gs-factory WRC-X3200GST3 0.00 -N | \
append-string MT7622_ELECOM_WRC-X3200GST3
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e
endef
TARGET_DEVICES += elecom_wrc-x3200gst3
define Device/linksys_e8450
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E8450
DEVICE_ALT0_VENDOR := Belkin
DEVICE_ALT0_MODEL := RT3200
DEVICE_DTS := mt7622-linksys-e8450
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-usb3
endef
TARGET_DEVICES += linksys_e8450
define Device/linksys_e8450-ubi
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E8450
DEVICE_VARIANT := UBI
DEVICE_ALT0_VENDOR := Belkin
DEVICE_ALT0_MODEL := RT3200
DEVICE_ALT0_VARIANT := UBI
DEVICE_DTS := mt7622-linksys-e8450-ubi
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
UBOOTENV_IN_UBI := 1
KERNEL_IN_UBI := 1
KERNEL := kernel-bin | gzip
# recovery can also be used with stock firmware web-ui, hence the padding...
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 128k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := bl2 snand-1ddr
ARTIFACT/bl31-uboot.fip := bl31-uboot linksys_e8450
endef
TARGET_DEVICES += linksys_e8450-ubi
define Device/mediatek_mt7622-rfb1
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7622 rfb1 AP
DEVICE_DTS := mt7622-rfb1
DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3
endef
TARGET_DEVICES += mediatek_mt7622-rfb1
define Device/mediatek_mt7622-rfb1-ubi
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7622 rfb1 AP (UBI)
DEVICE_DTS := mt7622-rfb1-ubi
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3
BOARD_NAME := mediatek,mt7622-rfb1-ubi
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4194304
IMAGE_SIZE := 32768k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mediatek_mt7622-rfb1-ubi
define Device/ruijie_rg-ew3200gx-pro
DEVICE_VENDOR := Ruijie
DEVICE_MODEL := RG-EW3200GX PRO
DEVICE_DTS := mt7622-ruijie-rg-ew3200gx-pro
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e
endef
TARGET_DEVICES += ruijie_rg-ew3200gx-pro
define Device/totolink_a8000ru
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := A8000RU
DEVICE_DTS := mt7622-totolink-a8000ru
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := swconfig
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += totolink_a8000ru
define Device/ubnt_unifi-6-lr
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi 6 LR
DEVICE_DTS_CONFIG := config@1
DEVICE_DTS := mt7622-ubnt-unifi-6-lr
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-leds-ubnt-ledbar
endef
TARGET_DEVICES += ubnt_unifi-6-lr
define Device/ubnt_unifi-6-lr-ubootmod
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi 6 LR
DEVICE_VARIANT := U-Boot mod
DEVICE_DTS := mt7622-ubnt-unifi-6-lr-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-leds-ubnt-ledbar
KERNEL := kernel-bin | lzma
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := bl2 nor-2ddr
ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr
endef
TARGET_DEVICES += ubnt_unifi-6-lr-ubootmod
define Device/xiaomi_redmi-router-ax6s
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6S
DEVICE_ALT0_VENDOR := Xiaomi
DEVICE_ALT0_MODEL := Router AX3200
DEVICE_DTS := mt7622-xiaomi-redmi-router-ax6s
DEVICE_DTS_DIR := ../dts
BOARD_NAME := xiaomi,redmi-router-ax6s
DEVICE_PACKAGES := kmod-mt7915e
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6s
Reference in New Issue View Git Blame Copy Permalink