openwrt/target/linux/ath79/dts
David Bauer 5897b2be21 ath79: remove lines-initial-states property
The lines-initial-states property was an early attempt to set the latch
bit of the shift register on driver probe. It is not implemented in the
driver and was rejected upstream. The latch bit was always set by a GPIO
hog, so this property is safe to drop.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-07-25 17:27:57 +02:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
ar1022_iodata_wn-ag300dgr.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7100.dtsi ath79: fix dtc compiler warnings 2018-12-12 12:28:26 +01:00
ar7161_adtran_bsap1800-v2.dts ath79: add support for Bluesocket BSAP1880 board 2019-07-17 22:59:29 +02:00
ar7161_adtran_bsap1840.dts ath79: add support for Bluesocket BSAP1880 board 2019-07-17 22:59:29 +02:00
ar7161_adtran_bsap1880.dtsi ath79: add support for Bluesocket BSAP1880 board 2019-07-17 22:59:29 +02:00
ar7161_aruba_ap-105.dts ath79: add support for Aruba AP-105 2019-05-18 16:44:41 +02:00
ar7161_buffalo_wzr-hp-ag300h.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7161_dlink_dir-825-b1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7161_jjplus_ja76pf2.dts ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
ar7161_netgear_wndr3700.dts ath79: specify "firmware" partition format for WNDR3700 and v2 2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3700.dtsi ath79: convert Netgear WNDR3700 series to gpio-keys 2019-05-18 17:59:49 +02:00
ar7161_netgear_wndr3700v2.dts ath79: specify "firmware" partition format for WNDR3700 and v2 2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3800.dts ath79: specify "firmware" partition format for Netgear WNDR3800 2018-11-24 08:46:59 +01:00
ar7161_ubnt_routerstation-pro.dts ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_buffalo_whr-g301n.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_netgear_wnr612-v2.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_netgear_wnr612-v2.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_on_n150r.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr74xn-v1.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_tplink_tl-wr740n-v1.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr740n-v3.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr741-v1.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr841-v5.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr941-v4.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240.dtsi ath79: use ar8216 for builtin switch 2019-03-24 01:44:27 +01:00
ar7241_tplink_tl-mr3x20.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3220-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3420-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr841-v7.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7241_tplink_tl-wr842n-v1.dts ath79: add support for TP-Link TL-WR842N/ND v1 router 2018-12-15 21:35:45 +01:00
ar7241_tplink.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7241_ubnt_airrouter.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
ar7241_ubnt_bullet-m.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241_ubnt_nanostation-m.dts ath79: align naming of Ubiquiti Nanostation M 2019-03-18 20:55:24 +01:00
ar7241_ubnt_rocket-m.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241_ubnt_unifi.dts ath79: Define firmware partition format to all boards where applicable 2018-12-06 13:28:22 +01:00
ar7241_ubnt_xm_outdoor.dtsi ath79: split ubnt outdoor device leds into separate dtsi 2018-12-03 07:58:49 +01:00
ar7241_ubnt_xm.dtsi ath79: Define firmware partition format to all boards where applicable 2018-12-06 13:28:22 +01:00
ar7241.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
ar7242_avm_fritz300e.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7242_buffalo_bhr-4grv.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_buffalo_wzr-bhr.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_tplink_tl-wr2543-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7242.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
ar9132_tplink_tl-wa901nd-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr941-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
ar9132.dtsi ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x 2018-08-28 11:26:53 +02:00
ar9330_glinet_gl-ar150.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9330_pqi_air-pen.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9330.dtsi ath79: ar9330: add missing watchdog node 2019-07-17 16:49:20 +02:00
ar9331_8dev_carambola2.dts ath79: add support for 8devices Carambola2 development board 2019-06-05 10:24:45 +02:00
ar9331_embeddedwireless_dorin.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9331_etactica_eg200.dts ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9331_pisen_wmm003n.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-mr10u.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-mr3040-v2.dts ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-wr703n.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr710n-v1.dts ath79: add TP-Link TL-WR710N v1 2019-03-24 01:44:27 +01:00
ar9331_tplink_tl-wr740n-v4.dts ath79: rename TL-WR740ND-v4 to TL-WR740N-v4 2019-02-14 16:56:14 +01:00
ar9331_tplink_tl-wr741nd-v4.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9341_pcs_cr3000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9341_tplink_tl-wr841-v8.dts ath79: add support for TP-Link TL-WR841N/ND v8 2018-12-31 13:28:31 +01:00
ar9341_tplink_tl-wr842n-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9341.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9342_iodata_etg3-r.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9342_ubnt_bullet-m-xw.dts ath79: ubnt-bullet-m-xw: Remove eth1 disabled node 2018-12-27 16:02:25 +01:00
ar9342_ubnt_lap-120.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanobeam-ac.dts ath79: Add support for Ubiquiti NanoBeam AC 2019-03-22 00:40:29 +01:00
ar9342_ubnt_nanostation-ac-loco.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanostation-ac.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9342_ubnt_nanostation-m-xw.dts ath79: Add support for Ubiquiti Nanostation M (XW) 2019-03-05 03:15:52 +01:00
ar9342_ubnt_wa.dtsi ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_xw.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9344_comfast_cf-e120a-v3.dts ath79: add support for COMFAST CF-E120A v3 2019-02-28 11:26:10 +01:00
ar9344_dlink_dir-8x5.dtsi ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-825-c1.dts ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-835-a1.dts ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_ocedo_raccoon.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
ar9344_pcs_cap324.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_pcs_cr5000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_qihoo_c301.dts ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
ar9344_tplink_cpe510-v2.dts ath79: add support for TP-Link CPE510-v2/v3 2019-07-18 00:06:55 +02:00
ar9344_tplink_cpe510-v3.dts ath79: add support for TP-Link CPE510-v2/v3 2019-07-18 00:06:55 +02:00
ar9344_tplink_cpe510.dtsi ath79: add support for TP-Link CPE510-v2/v3 2019-07-18 00:06:55 +02:00
ar9344_tplink_cpe610-v1.dts ath79: increase kernel partition size for CPE610v1 2019-07-07 13:02:06 +02:00
ar9344_tplink_tl-wdr3600-v1.dts ath79: Use -v1 suffix for TP-Link WDR3600/4300 2019-07-03 07:45:00 +02:00
ar9344_tplink_tl-wdr4300-v1.dts ath79: Use -v1 suffix for TP-Link WDR3600/4300 2019-07-03 07:45:00 +02:00
ar9344_tplink_tl-wdr4300.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_wd_mynet-n750.dts ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
ar9344_wd_mynet-wifi-rangeextender.dts ath79: convert WD MyNet Range Extender to gpio-keys 2019-05-18 17:59:49 +02:00
ar9344_winchannel_wb2000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_zbtlink_zbt-wd323.dts ath79: Add support for ZBT-WD323 2019-06-05 10:24:36 +02:00
ar9344.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
ath79.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
qca953x_tplink_tl-wr810n.dtsi ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca953x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
qca956x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
qca9531_comfast_cf-e5.dts ath79: add support for COMFAST CF-E5/E7 2019-03-24 01:44:27 +01:00
qca9531_engenius_ews511ap.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_glinet_gl-ar300m-lite.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nand.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nor.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m.dtsi ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_glinet_gl-x750.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_tplink_archer-d50-v1.dts ath79: add support for TP-Link Archer D50 V1 2019-05-18 17:59:49 +02:00
qca9531_tplink_tl-wr810n-v1.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9531_yuncore_a770.dts ath79: add support for YunCore A770 2019-03-09 16:31:17 +01:00
qca9533_comfast_cf-e110n-v2.dts ath79: add support for COMFAST CF-E110N 2018-12-31 16:25:11 +01:00
qca9533_tplink_cpe210-v2.dts ath79: Add support for TP-Link CPE210 v2 2019-04-02 02:10:59 +02:00
qca9533_tplink_cpe210-v3.dts ath79: Add support for TP-Link CPE210 v3 2019-04-02 02:10:59 +02:00
qca9533_tplink_cpe210.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9533_tplink_tl-wr810n-v2.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr841-v9.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9533_tplink_tl-wr841-v11.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9533_tplink_tl-wr841.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9533_tplink_tl-wr842n-v3.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9533_ubnt_acb-isp.dts ath79: add support for Ubiquiti airCube ISP 2019-04-08 18:37:04 +02:00
qca9557_buffalo_bhr-4grv2.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
qca9557_iodata_wn-ac1167dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: modify device name of I-O DATA WN-AC1600DGR2 2019-07-18 00:06:55 +02:00
qca9557_iodata_wn-ac1600dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
qca9558_devolo_dvl1xxx.dtsi ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1200e.dts ath79: add support for devolo WiFi pro 1200e 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200i.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1750c.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1750e.dts ath79: add support for Devolo WiFi Pro 1750e 2019-01-26 21:46:33 +01:00
qca9558_devolo_dvl1750i.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1750x.dts ath79: add support for devolo WiFi pro 1750x 2019-07-14 16:20:53 +02:00
qca9558_engenius_ecb1750.dts ath79: ecb1750: additional dts fixes 2019-05-27 22:44:08 +02:00
qca9558_engenius_epg5000.dts ath79: fix leds description for EnGenius EPG5000 2019-03-18 20:42:29 +01:00
qca9558_librerouter_librerouter-v1.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9558_netgear_ex6400.dts ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
qca9558_netgear_ex7300.dts ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
qca9558_netgear_ex7300.dtsi ath79: remove lines-initial-states property 2019-07-25 17:27:57 +02:00
qca9558_ocedo_koala.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_ocedo_ursus.dts ath79: add support for OCEDO Ursus 2019-04-08 18:37:04 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9558_tplink_archer-c5-v1.dts ath79: add support for TP-Link Archer C5 v1 2019-02-28 11:32:55 +01:00
qca9558_tplink_archer-c7-v1.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7-v2.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_re350k-v1.dts ath79: add support for TP-Link RE350K v1 2019-03-11 22:00:26 +01:00
qca9558_tplink_re355-v1.dts ath79: add support for TP-Link RE355 v1 and RE450 v1 2019-07-17 23:14:23 +02:00
qca9558_tplink_re450-v1.dts ath79: add support for TP-Link RE355 v1 and RE450 v1 2019-07-17 23:14:23 +02:00
qca9558_tplink_rex5x.dtsi ath79: add support for TP-Link RE355 v1 and RE450 v1 2019-07-17 23:14:23 +02:00
qca9558_tplink_tl-wdr4900-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wr941n-v7-cn.dts ath79: add support for TP-Link TL-WR941N v7 (CN) 2019-03-24 01:44:27 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_trendnet_tew-823dru.dts ath79: add support for Trendnet TEW-823DRU 2019-07-18 00:06:55 +02:00
qca9561_avm_fritz4020.dts ath79: remove lines-initial-states property 2019-07-25 17:27:57 +02:00
qca9561_tplink_archer-c5x.dtsi ath79: fix "spi-gpio: convert deprecated binding" 2019-06-25 14:50:08 +02:00
qca9561_tplink_archer-c6x.dtsi ath79: Add support for TP-Link Archer C60 v1 2019-07-18 00:06:55 +02:00
qca9561_tplink_archer-c25-v1.dts ath79: Remove redundant LED GPIO definitions for Archer C25 v1 2019-06-24 20:22:23 +02:00
qca9561_tplink_archer-c58-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c59-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c60-v1.dts ath79: Add support for TP-Link Archer C60 v1 2019-07-18 00:06:55 +02:00
qca9561_tplink_archer-c60-v2.dts ath79: Add support for TP-Link Archer C60 v2 2019-07-18 00:06:55 +02:00
qca9561_xiaomi_mi-router-4q.dts ath79: add support for Xiaomi Mi Router 4Q 2019-02-11 19:04:06 +01:00
qca9563_dlink_dir-842-c2.dts ath79: add support for D-Link DIR-842 C2 2019-07-24 11:36:02 +02:00
qca9563_dlink_dir-859-a1.dts ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_elecom_wrc-1750ghbk2-i.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_elecom_wrc-ghbk2-i.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_glinet_gl-ar750s.dts ath79: glinet_gl-ar750s: Add USB power & microSD 2019-05-20 21:25:00 +02:00
qca9563_nec_wg800hp.dts ath79: add support for NEC Aterm WG800HP 2018-12-24 19:18:07 +01:00
qca9563_nec_wg1200cr.dts ath79: add support for NEC Aterm WG1200CR 2019-04-06 19:14:06 +02:00
qca9563_phicomm_k2t.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_rosinson_wr818.dts ath79: use the qca,qca9563 chip compatible for the WR818 2019-05-18 17:59:49 +02:00
qca9563_tplink_archer-a7-v5.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9563_tplink_archer-c2-v3.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_tplink_archer-c6-v2.dts ath79: add support for TP-Link Archer C6 v2 2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-c7-v4.dts ath79: fix "spi-gpio: convert deprecated binding" 2019-06-25 14:50:08 +02:00
qca9563_tplink_archer-c7-v5.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9563_tplink_archer-x6-v2.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_archer-x7-v5.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_re450-v2.dts ath79: Consistently label info partition 2019-06-10 11:25:41 +02:00
qca9563_tplink_tl-wr1043n-v5.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_tplink_tl-wr1043n.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_tl-wr1043nd-v4.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: Fix UBNT Unifi AC LEDs 2018-12-31 13:28:31 +01:00