Deng Qingfang 5580a9dd31 ramips: add support for GeHua GHL-R-001 ... Specs SoC: MT7621AT RAM: 512MiB Flash: 32MiB MX25L25635F SPI NOR 2.4G: MT7603EN 5G: MT7612EN Ethernet: 4x GE ports (1x WAN, 3x LAN) with link status LEDs USB 3.0 LEDs: POWER, 5G WIFI, 2.4G WIFI, USB, Internet. The last two ones are controlled by GPIO UART: There are 2 UARTs (UARTLITE1/ttyS0 and UARTLITE3/ttyS1) on board. UARTLITE1 is close to LEDs, and UARTLITE3 is close to flash chip. The stock u-boot uses UARTLITE1 by default. Baud rate is 57600 Flash instruction 1. telnet 192.168.9.1 2317, username is "root" and password is "admin" One can alternatively use UART to log in 2. Put OpenWrt firmware in a FAT32 USB drive, and connect it to the router One can alternatively download the firmware via wget through Internet 3. mtd write /path/to/openwrt.bin firmware 4. reboot Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>		2018-12-29 16:03:30 +01:00
..
board.d	ramips: add support for GeHua GHL-R-001	2018-12-29 16:03:30 +01:00
hotplug.d	ramips: add support for DLINK DWR-922-E2	2018-12-29 16:03:30 +01:00
init.d	treewide: use the generic board_name function	2017-07-15 23:13:34 +02:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00