openwrt/target/linux/ramips
Deng Qingfang 5580a9dd31 ramips: add support for GeHua GHL-R-001
Specs
	SoC: MT7621AT
	RAM: 512MiB
	Flash: 32MiB MX25L25635F SPI NOR
	2.4G: MT7603EN
	5G: MT7612EN
	Ethernet: 4x GE ports (1x WAN, 3x LAN) with link status LEDs
	USB 3.0
	LEDs: POWER, 5G WIFI, 2.4G WIFI, USB, Internet.
	      The last two ones are controlled by GPIO
	UART: There are 2 UARTs (UARTLITE1/ttyS0 and UARTLITE3/ttyS1) on board.
	      UARTLITE1 is close to LEDs, and UARTLITE3 is close to flash chip.
	      The stock u-boot uses UARTLITE1 by default. Baud rate is 57600

Flash instruction
	1. telnet 192.168.9.1 2317, username is "root" and password is "admin"
	   One can alternatively use UART to log in
	2. Put OpenWrt firmware in a FAT32 USB drive, and connect it to the router
	   One can alternatively download the firmware via wget through Internet
	3. mtd write /path/to/openwrt.bin firmware
	4. reboot

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-29 16:03:30 +01:00
..
base-files ramips: add support for GeHua GHL-R-001 2018-12-29 16:03:30 +01:00
dts ramips: add support for GeHua GHL-R-001 2018-12-29 16:03:30 +01:00
files-4.14/drivers ramips: mt7620: add force use of mdio-mode 2018-11-26 12:16:52 +01:00
image ramips: add support for GeHua GHL-R-001 2018-12-29 16:03:30 +01:00
mt76x8 ramips: mt76x8: select only the matching mt76 driver 2018-12-06 12:17:25 +01:00
mt7620 ramips: mt7620: select only the matching mt76 driver 2018-12-03 15:34:56 +01:00
mt7621 ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE 2018-12-13 13:39:56 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.87 2018-12-10 16:32:22 +01:00
rt288x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
rt305x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
rt3883 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00