mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
538a1d740c
The patches were generated from the RPi repo with the following command: git format-patch v6.6.58..rpi-6.6.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
390 lines
9.4 KiB
Diff
390 lines
9.4 KiB
Diff
From 4113b1097fe40ff3a64ee7a9ade7c258e9ecdb5b Mon Sep 17 00:00:00 2001
|
|
From: Richard Oliver <richard.oliver@raspberrypi.com>
|
|
Date: Mon, 3 Jun 2024 14:10:27 +0100
|
|
Subject: [PATCH 1248/1350] dts: Add 'AI Camera' support
|
|
|
|
The AI Camera combines an IMX500 and a RP2040 GPIO bridge on a single
|
|
module. The Raspberry Pi camera regulator is used for both IMX500 and
|
|
RP2040. SPI, clocks, and reset (required by IMX500) are provided by the
|
|
RP2040 GPIO bridge.
|
|
|
|
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 2 +
|
|
arch/arm/boot/dts/overlays/README | 21 +++
|
|
arch/arm/boot/dts/overlays/imx500-overlay.dts | 119 +++++++++++++++++
|
|
.../boot/dts/overlays/imx500-pi5-overlay.dts | 124 ++++++++++++++++++
|
|
arch/arm/boot/dts/overlays/imx500.dtsi | 28 ++++
|
|
arch/arm/boot/dts/overlays/overlay_map.dts | 10 ++
|
|
.../dts/overlays/rpi-rp2040-gpio-bridge.dtsi | 21 +++
|
|
7 files changed, 325 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx500-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx500-pi5-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx500.dtsi
|
|
create mode 100644 arch/arm/boot/dts/overlays/rpi-rp2040-gpio-bridge.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -136,6 +136,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
imx378.dtbo \
|
|
imx462.dtbo \
|
|
imx477.dtbo \
|
|
+ imx500.dtbo \
|
|
+ imx500-pi5.dtbo \
|
|
imx519.dtbo \
|
|
imx708.dtbo \
|
|
interludeaudio-analog.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -2818,6 +2818,27 @@ Params: rotation Mounting
|
|
sync-sink Configure as vsync sink
|
|
|
|
|
|
+Name: imx500
|
|
+Info: Sony IMX500 camera module.
|
|
+ Uses Unicam 1, which is the standard camera connector on most Pi
|
|
+ variants.
|
|
+Load: dtoverlay=imx500,<param>=<val>
|
|
+Params: rotation Mounting rotation of the camera sensor (0 or
|
|
+ 180, default 0)
|
|
+ orientation Sensor orientation (0 = front, 1 = rear,
|
|
+ 2 = external, default external)
|
|
+ media-controller Configure use of Media Controller API for
|
|
+ configuring the sensor (default on)
|
|
+ cam0 Adopt the default configuration for CAM0 on a
|
|
+ Compute Module (CSI0, i2c_vc, and cam0_reg).
|
|
+ bypass-cache Do save blocks of data to flash when using
|
|
+ rp2040-gpio-bridge for SPI transfers.
|
|
+
|
|
+
|
|
+Name: imx500-pi5
|
|
+Info: See imx500 (this is the Pi 5 version)
|
|
+
|
|
+
|
|
Name: imx519
|
|
Info: Sony IMX519 camera module.
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx500-overlay.dts
|
|
@@ -0,0 +1,119 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Definitions for IMX500 camera module on VC I2C bus
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c0if>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&i2c0mux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_frag: fragment@2 {
|
|
+ target = <&cam1_reg>;
|
|
+ cam_reg: __overlay__ {
|
|
+ startup-delay-us = <300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ i2c_frag: fragment@100 {
|
|
+ target = <&i2c_csi_dsi>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ #include "imx500.dtsi"
|
|
+ #include "rpi-rp2040-gpio-bridge.dtsi"
|
|
+ };
|
|
+ };
|
|
+
|
|
+ csi_frag: fragment@101 {
|
|
+ target = <&csi1>;
|
|
+ csi: __overlay__ {
|
|
+ status = "okay";
|
|
+ brcm,media-controller;
|
|
+
|
|
+ port {
|
|
+ csi_ep: endpoint {
|
|
+ remote-endpoint = <&cam_endpoint>;
|
|
+ clock-lanes = <0>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ spi_frag: fragment@102 {
|
|
+ target = <&spi_bridgedev0>;
|
|
+ __overlay__ {
|
|
+ compatible = "sony,imx500";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ chosen_frag: fragment@103 {
|
|
+ target = <&chosen>;
|
|
+ __overlay__ {
|
|
+ core_freq_fixed;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ clocks_frag: fragment@104 {
|
|
+ target-path = "/clocks";
|
|
+ __overlay__ {
|
|
+ clk_aicam: clk-aicam {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <24000000>;
|
|
+ };
|
|
+
|
|
+ clk_aicam_gated: clk-aicam-gated {
|
|
+ compatible = "gpio-gate-clock";
|
|
+ clocks = <&clk_aicam>;
|
|
+ #clock-cells = <0>;
|
|
+ enable-gpios = <&spi_bridge 21 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ rotation = <&cam_node>,"rotation:0";
|
|
+ orientation = <&cam_node>,"orientation:0";
|
|
+ media-controller = <&csi>,"brcm,media-controller?";
|
|
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
|
|
+ <&csi_frag>, "target:0=",<&csi0>,
|
|
+ <&spi_bridge>, "power-supply:0=",<&cam0_reg>,
|
|
+ <®_frag>, "target:0=",<&cam0_reg>,
|
|
+ <&cam_node>, "VANA-supply:0=",<&cam0_reg>;
|
|
+ bypass-cache = <&spi_bridge>,"bypass-cache?";
|
|
+ };
|
|
+};
|
|
+
|
|
+&cam_node {
|
|
+ status = "okay";
|
|
+ reset-gpios = <&spi_bridge 20 GPIO_ACTIVE_HIGH>;
|
|
+ clocks = <&clk_aicam_gated>;
|
|
+ spi = <&spi_bridgedev0>;
|
|
+};
|
|
+
|
|
+&spi_bridge {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cam_endpoint {
|
|
+ remote-endpoint = <&csi_ep>;
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx500-pi5-overlay.dts
|
|
@@ -0,0 +1,124 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Definitions for IMX500 camera module on VC I2C bus
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2712";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c0if>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&i2c0mux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_frag: fragment@2 {
|
|
+ target = <&cam1_reg>;
|
|
+ cam_reg: __overlay__ {
|
|
+ startup-delay-us = <300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ i2c_frag: fragment@100 {
|
|
+ target = <&i2c_csi_dsi>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ #include "imx500.dtsi"
|
|
+ #include "rpi-rp2040-gpio-bridge.dtsi"
|
|
+ };
|
|
+ };
|
|
+
|
|
+ csi_frag: fragment@101 {
|
|
+ target = <&csi1>;
|
|
+ csi: __overlay__ {
|
|
+ status = "okay";
|
|
+ brcm,media-controller;
|
|
+
|
|
+ port {
|
|
+ csi_ep: endpoint {
|
|
+ remote-endpoint = <&cam_endpoint>;
|
|
+ clock-lanes = <0>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ spi_frag: fragment@102 {
|
|
+ target = <&spi_bridge>;
|
|
+ spi_frag_overlay: __overlay__ {
|
|
+ fast_xfer_requires_i2c_lock = <1>;
|
|
+ fast_xfer_recv_gpio_base = <11>;
|
|
+ fast_xfer-gpios = <&rp1_gpio 40 0>, // CD1_SDA (used as data)
|
|
+ <&rp1_gpio 48 0>; // CD1_IO1_MICDAT1 (clock)
|
|
+ };
|
|
+ };
|
|
+
|
|
+ spi_bridge_frag: fragment@103 {
|
|
+ target = <&spi_bridgedev0>;
|
|
+ __overlay__ {
|
|
+ compatible = "sony,imx500";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ clocks_frag: fragment@104 {
|
|
+ target-path = "/clocks";
|
|
+ __overlay__ {
|
|
+ clk_aicam: clk-aicam {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <24000000>;
|
|
+ };
|
|
+
|
|
+ clk_aicam_gated: clk-aicam-gated {
|
|
+ compatible = "gpio-gate-clock";
|
|
+ clocks = <&clk_aicam>;
|
|
+ #clock-cells = <0>;
|
|
+ enable-gpios = <&spi_bridge 21 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ rotation = <&cam_node>,"rotation:0";
|
|
+ orientation = <&cam_node>,"orientation:0";
|
|
+ media-controller = <&csi>,"brcm,media-controller?";
|
|
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
|
|
+ <&csi_frag>, "target:0=",<&csi0>,
|
|
+ <&spi_frag_overlay>, "fast_xfer-gpios:4=38", // CD0_SDA (data)
|
|
+ <&spi_frag_overlay>, "fast_xfer-gpios:16=35", // CD0_IO1_MICDAT0 (clock)
|
|
+ <&spi_bridge>, "power-supply:0=",<&cam0_reg>,
|
|
+ <®_frag>, "target:0=",<&cam0_reg>,
|
|
+ <&cam_node>, "VANA-supply:0=",<&cam0_reg>;
|
|
+ bypass-cache = <&spi_bridge>,"bypass-cache?";
|
|
+ };
|
|
+};
|
|
+
|
|
+&cam_node {
|
|
+ status = "okay";
|
|
+ reset-gpios = <&spi_bridge 20 GPIO_ACTIVE_HIGH>;
|
|
+ clocks = <&clk_aicam_gated>;
|
|
+ spi = <&spi_bridgedev0>;
|
|
+};
|
|
+
|
|
+&spi_bridge {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cam_endpoint {
|
|
+ remote-endpoint = <&csi_ep>;
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx500.dtsi
|
|
@@ -0,0 +1,28 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+cam_node: imx500@1a {
|
|
+ reg = <0x1a>;
|
|
+ compatible = "sony,imx500";
|
|
+ status = "disabled";
|
|
+
|
|
+ clocks = <&cam1_clk>;
|
|
+ clock-names = "inck";
|
|
+
|
|
+ vana-supply = <&cam1_reg>; /* 2.7v */
|
|
+ vdig-supply = <&cam_dummy_reg>; /* 0.84v */
|
|
+ vif-supply = <&cam_dummy_reg>; /* 1.8v */
|
|
+
|
|
+ reset-gpios = <&gpio 255 GPIO_ACTIVE_HIGH>;
|
|
+
|
|
+ rotation = <0>;
|
|
+ orientation = <2>;
|
|
+
|
|
+ port {
|
|
+ cam_endpoint: endpoint {
|
|
+ clock-lanes = <0>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ link-frequencies =
|
|
+ /bits/ 64 <444000000>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/boot/dts/overlays/overlay_map.dts
|
|
+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
|
|
@@ -118,6 +118,16 @@
|
|
bcm2711;
|
|
};
|
|
|
|
+ imx500 {
|
|
+ bcm2835;
|
|
+ bcm2711;
|
|
+ bcm2712 = "imx500-pi5";
|
|
+ };
|
|
+
|
|
+ imx500-pi5 {
|
|
+ bcm2712;
|
|
+ };
|
|
+
|
|
lirc-rpi {
|
|
deprecated = "use gpio-ir";
|
|
};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/rpi-rp2040-gpio-bridge.dtsi
|
|
@@ -0,0 +1,21 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+spi_bridge: spi@40 {
|
|
+ reg = <0x40>;
|
|
+ compatible = "raspberrypi,rp2040-gpio-bridge";
|
|
+ status = "disabled";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ power-supply = <&cam1_reg>;
|
|
+
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-controller;
|
|
+
|
|
+ spi_bridgedev0: spidev@0{
|
|
+ compatible = "spidev";
|
|
+ reg = <0>; /* CE0 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <35000000>;
|
|
+ };
|
|
+};
|