ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 18:19:02 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
538a1d740c
openwrt/target/linux/bcm27xx/patches-6.6/950-1233-drivers-drm-rp1-dsi-Implement-more-DSI-options-and-f.patch
Álvaro Fernández Rojas 538a1d740c bcm27xx: update to latest RPi patches 
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.58..rpi-6.6.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-10-31 13:44:23 +01:00

243 lines
9.9 KiB
Diff
Raw Blame History

From e596d70725ca70113d39d9366d7b4d3e492f6449 Mon Sep 17 00:00:00 2001
From: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Date: Wed, 31 Jul 2024 19:05:29 +0100
Subject: [PATCH 1233/1350] drivers: drm: rp1-dsi: Implement more DSI options
and flags
Now implementing:
- Per-command selection of LP or HS for commands (previously LP)
- EoTp transmission option (previously EoTp was always disabled)
- Non-continuous clock option (previously always continuous)
- Per-command enabling of ACK request (in command mode only)
Make a plausible (and possibly correct) attempt to measure the
longest LP command that will fit into vertical blanking lines.
DON'T set both "Burst Mode" and "Sync Events" flags together.
This is redundant in the standard IP; in this RP1 variant it
would enable Sync Pulses but may break with some video timings.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
---
drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi.c | 5 +-
drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi.h | 3 +-
drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi_dsi.c | 106 +++++++++++++++++-----
3 files changed, 91 insertions(+), 23 deletions(-)
--- a/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi.c
+++ b/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi.c
@@ -396,7 +396,10 @@ ssize_t rp1dsi_host_transfer(struct mipi
return ret;
}
- rp1dsi_dsi_send(dsi, *(u32 *)(&packet.header), packet.payload_length, packet.payload);
+ rp1dsi_dsi_send(dsi, *(u32 *)(&packet.header),
+ packet.payload_length, packet.payload,
+ !!(msg->flags & MIPI_DSI_MSG_USE_LPM),
+ !!(msg->flags & MIPI_DSI_MSG_REQ_ACK));
/* Optional read back */
if (msg->rx_len && msg->rx_buf)
--- a/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi.h
+++ b/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi.h
@@ -86,7 +86,8 @@ void rp1dsi_mipicfg_setup(struct rp1_dsi
/* Functions to control the SNPS D-PHY and DSI block setup */
void rp1dsi_dsi_setup(struct rp1_dsi *dsi, struct drm_display_mode const *mode);
-void rp1dsi_dsi_send(struct rp1_dsi *dsi, u32 header, int len, const u8 *buf);
+void rp1dsi_dsi_send(struct rp1_dsi *dsi, u32 header, int len, const u8 *buf,
+ bool use_lpm, bool req_ack);
int rp1dsi_dsi_recv(struct rp1_dsi *dsi, int len, u8 *buf);
void rp1dsi_dsi_set_cmdmode(struct rp1_dsi *dsi, int cmd_mode);
void rp1dsi_dsi_stop(struct rp1_dsi *dsi);
--- a/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi_dsi.c
+++ b/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi_dsi.c
@@ -103,6 +103,24 @@
/* And some bitfield definitions */
+#define DSI_PCKHDL_EOTP_TX_EN BIT(0)
+#define DSI_PCKHDL_BTA_EN BIT(2)
+
+#define DSI_VID_MODE_LP_CMD_EN BIT(15)
+#define DSI_VID_MODE_FRAME_BTA_ACK_EN BIT(14)
+#define DSI_VID_MODE_LP_HFP_EN BIT(13)
+#define DSI_VID_MODE_LP_HBP_EN BIT(12)
+#define DSI_VID_MODE_LP_VACT_EN BIT(11)
+#define DSI_VID_MODE_LP_VFP_EN BIT(10)
+#define DSI_VID_MODE_LP_VBP_EN BIT(9)
+#define DSI_VID_MODE_LP_VSA_EN BIT(8)
+#define DSI_VID_MODE_SYNC_PULSES 0
+#define DSI_VID_MODE_SYNC_EVENTS 1
+#define DSI_VID_MODE_BURST 2
+
+#define DSI_CMD_MODE_ALL_LP 0x10f7f00
+#define DSI_CMD_MODE_ACK_RQST_EN BIT(1)
+
#define DPHY_PWR_UP_SHUTDOWNZ_LSB 0
#define DPHY_PWR_UP_SHUTDOWNZ_BITS BIT(DPHY_PWR_UP_SHUTDOWNZ_LSB)
@@ -1252,8 +1270,8 @@ static u32 dphy_configure_pll(struct rp1
vco_freq, actual_vco_freq, m, refclk, n,
hsfreq_table[dsi->hsfreq_index].hsfreqrange);
} else {
- drm_warn(dsi->drm,
- "rp1dsi: Error configuring DPHY PLL %uHz\n", vco_freq);
+ drm_err(dsi->drm,
+ "rp1dsi: Error configuring DPHY PLL %uHz\n", vco_freq);
}
return actual_vco_freq;
@@ -1321,7 +1339,7 @@ static void rp1dsi_dpiclk_start(struct r
clk_set_rate(dsi->clocks[RP1DSI_CLOCK_DPI], (4 * lanes * byte_clock) / (bpp >> 1));
clk_prepare_enable(dsi->clocks[RP1DSI_CLOCK_DPI]);
drm_info(dsi->drm,
- "rp1dsi: Nominal Byte clock %u DPI clock %lu (parent rate %lu)",
+ "rp1dsi: Nominal Byte clock %u DPI clock %lu (parent rate %lu)\n",
byte_clock,
clk_get_rate(dsi->clocks[RP1DSI_CLOCK_DPI]),
clk_get_rate(clk_get_parent(dsi->clocks[RP1DSI_CLOCK_DPI])));
@@ -1365,7 +1383,8 @@ static u32 get_colorcode(enum mipi_dsi_p
void rp1dsi_dsi_setup(struct rp1_dsi *dsi, struct drm_display_mode const *mode)
{
- u32 timeout, mask, vid_mode_cfg;
+ int cmdtim;
+ u32 timeout, mask, clkdiv;
unsigned int bpp = mipi_dsi_pixel_format_to_bpp(dsi->display_format);
u32 byte_clock = clamp((bpp * 125 * min(mode->clock, RP1DSI_DPI_MAX_KHZ)) / dsi->lanes,
RP1DSI_BYTE_CLK_MIN, RP1DSI_BYTE_CLK_MAX);
@@ -1374,19 +1393,31 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
DSI_WRITE(DSI_DPI_CFG_POL, 0);
DSI_WRITE(DSI_GEN_VCID, dsi->vc);
DSI_WRITE(DSI_DPI_COLOR_CODING, get_colorcode(dsi->display_format));
- /* a conservative guess (LP escape is slow!) */
- DSI_WRITE(DSI_DPI_LP_CMD_TIM, 0x00100000);
- /* Drop to LP where possible; use LP Escape for all commands */
- vid_mode_cfg = 0xbf00;
- if (!(dsi->display_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
- vid_mode_cfg |= 0x01;
- else if (8 * dsi->lanes > bpp)
- vid_mode_cfg &= ~0x400; /* PULSE && inexact DPICLK => fix HBP time */
+ /*
+ * Flags to configure use of LP, EoTp, Burst Mode, Sync Events/Pulses.
+ * Note that Burst Mode implies Sync Events; the two flags need not be
+ * set concurrently, and in this RP1 variant *should not* both be set:
+ * doing so would (counter-intuitively) enable Sync Pulses and may fail
+ * if there is not sufficient time to return to LP11 state during HBP.
+ */
+ mask = DSI_VID_MODE_LP_HFP_EN | DSI_VID_MODE_LP_HBP_EN |
+ DSI_VID_MODE_LP_VACT_EN | DSI_VID_MODE_LP_VFP_EN |
+ DSI_VID_MODE_LP_VBP_EN | DSI_VID_MODE_LP_VSA_EN;
+ if (dsi->display_flags & MIPI_DSI_MODE_LPM)
+ mask |= DSI_VID_MODE_LP_CMD_EN;
if (dsi->display_flags & MIPI_DSI_MODE_VIDEO_BURST)
- vid_mode_cfg |= 0x02;
- DSI_WRITE(DSI_VID_MODE_CFG, vid_mode_cfg);
- DSI_WRITE(DSI_CMD_MODE_CFG, 0x10F7F00);
+ mask |= DSI_VID_MODE_BURST;
+ else if (!(dsi->display_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
+ mask |= DSI_VID_MODE_SYNC_EVENTS;
+ else if (8 * dsi->lanes > bpp)
+ mask &= ~DSI_VID_MODE_LP_HBP_EN; /* PULSE && inexact DPICLK => fix HBP time */
+ DSI_WRITE(DSI_VID_MODE_CFG, mask);
+ DSI_WRITE(DSI_CMD_MODE_CFG,
+ (dsi->display_flags & MIPI_DSI_MODE_LPM) ? DSI_CMD_MODE_ALL_LP : 0);
+ DSI_WRITE(DSI_PCKHDL_CFG,
+ DSI_PCKHDL_BTA_EN |
+ ((dsi->display_flags & MIPI_DSI_MODE_NO_EOT_PACKET) ? 0 : DSI_PCKHDL_EOTP_TX_EN));
/* Select Command Mode */
DSI_WRITE(DSI_MODE_CFG, 1);
@@ -1397,9 +1428,9 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
timeout = 0;
DSI_WRITE(DSI_TO_CNT_CFG, (timeout << 16) | RP1DSI_LPRX_TO_VAL);
DSI_WRITE(DSI_BTA_TO_CNT, RP1DSI_BTA_TO_VAL);
+ clkdiv = max(2u, 1u + byte_clock / RP1DSI_ESC_CLK_MAX); /* byte clocks per escape clock */
DSI_WRITE(DSI_CLKMGR_CFG,
- (RP1DSI_TO_CLK_DIV << 8) |
- max(2u, 1u + byte_clock / RP1DSI_ESC_CLK_MAX));
+ (RP1DSI_TO_CLK_DIV << 8) | clkdiv);
/* Configure video timings */
DSI_WRITE(DSI_VID_PKT_SIZE, mode->hdisplay);
@@ -1425,6 +1456,18 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
(hsfreq_table[dsi->hsfreq_index].data_lp2hs << DSI_PHY_TMR_LP2HS_LSB) |
(hsfreq_table[dsi->hsfreq_index].data_hs2lp << DSI_PHY_TMR_HS2LP_LSB));
+ /* Estimate how many LP bytes can be sent during vertical blanking (Databook 3.6.2.1) */
+ cmdtim = mode->htotal;
+ if (dsi->display_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+ cmdtim -= mode->hsync_end - mode->hsync_start;
+ cmdtim = (bpp * cmdtim - 64) / (8 * dsi->lanes); /* byte clocks after HSS and EoTp */
+ cmdtim -= hsfreq_table[dsi->hsfreq_index].data_hs2lp;
+ cmdtim -= hsfreq_table[dsi->hsfreq_index].data_lp2hs;
+ cmdtim = (cmdtim / clkdiv) - 24; /* escape clocks for commands */
+ cmdtim = max(0, cmdtim >> 4); /* bytes (at 2 clocks per bit) */
+ drm_info(dsi->drm, "rp1dsi: Command time (outvact): %d\n", cmdtim);
+ DSI_WRITE(DSI_DPI_LP_CMD_TIM, cmdtim << 16);
+
/* Wait for PLL lock */
for (timeout = (1 << 14); timeout != 0; --timeout) {
usleep_range(10, 50);
@@ -1434,9 +1477,9 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
if (timeout == 0)
drm_err(dsi->drm, "RP1DSI: Time out waiting for PLL\n");
- DSI_WRITE(DSI_LPCLK_CTRL, 0x1); /* configure the requesthsclk */
+ DSI_WRITE(DSI_LPCLK_CTRL,
+ (dsi->display_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0x3 : 0x1);
DSI_WRITE(DSI_PHY_TST_CTRL0, 0x2);
- DSI_WRITE(DSI_PCKHDL_CFG, 1 << 2); /* allow bus turnaround */
DSI_WRITE(DSI_PWR_UP, 0x1); /* power up */
/* Now it should be safe to start the external DPI clock divider */
@@ -1460,7 +1503,8 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
mask, DSI_READ(DSI_PHY_STATUS));
}
-void rp1dsi_dsi_send(struct rp1_dsi *dsi, u32 hdr, int len, const u8 *buf)
+void rp1dsi_dsi_send(struct rp1_dsi *dsi, u32 hdr, int len, const u8 *buf,
+ bool use_lpm, bool req_ack)
{
u32 val;
@@ -1471,6 +1515,24 @@ void rp1dsi_dsi_send(struct rp1_dsi *dsi
usleep_range(100, 150);
}
+ /*
+ * Update global configuration flags for LP/HS and ACK options.
+ * XXX It's not clear if having empty FIFOs (checked above and below) guarantees that
+ * the last command has completed and been ACKed, or how closely these control registers
+ * align with command/payload FIFO writes (as each is an independent clock-crossing)?
+ */
+ val = DSI_READ(DSI_VID_MODE_CFG);
+ if (use_lpm)
+ val |= DSI_VID_MODE_LP_CMD_EN;
+ else
+ val &= ~DSI_VID_MODE_LP_CMD_EN;
+ DSI_WRITE(DSI_VID_MODE_CFG, val);
+ val = (use_lpm) ? DSI_CMD_MODE_ALL_LP : 0;
+ if (req_ack)
+ val |= DSI_CMD_MODE_ACK_RQST_EN;
+ DSI_WRITE(DSI_CMD_MODE_CFG, val);
+ (void)DSI_READ(DSI_CMD_MODE_CFG);
+
/* Write payload (in 32-bit words) and header */
for (; len > 0; len -= 4) {
val = *buf++;
@@ -1504,8 +1566,10 @@ int rp1dsi_dsi_recv(struct rp1_dsi *dsi,
break;
usleep_range(100, 150);
}
- if (i == 0)
+ if (!i) {
+ drm_warn(dsi->drm, "Receive failed\n");
return -EIO;
+ }
for (i = 0; i < len; i += 4) {
/* Read fifo must not be empty before all bytes are read */
Reference in New Issue View Git Blame Copy Permalink