mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
e42327aa89
Specifically, SKW92A_E16, described here: http://www.skylabmodule.com/wp-content/uploads/SkyLab_SKW92A_V1.04_datasheet.pdf Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x u.FL - Power by micro-USB connector at USB1 on EVB - UART via micro-USB connector at USB3 on EVB (57600 8n1) - 5x Ethernet LEDs - 1x WLAN LEDs - 1x WPS LED connected by jumper wire from I2S_CK on J20 to WPS_LED pin hole next to daughter board on EVB - WPS/Reset button (S2 on EVB) - RESET button (S1 on EVB) is *not* connected to RST hole next to daughter board Flash instruction: >From Skylab firmware: 1. Associate with SKYLAP_AP 2. In a browser, load: http://10.10.10.254/ 3. Username/password: admin/admin 4. In web admin interface: Administration / Upload Firmware, browse to sysupgrade image, apply, flash will fail with a message: Not a valid firmware. *** Warning: "/var/tmpFW" has corrupted data! 5. Telnet to 10.10.10.254, drops you into a root shell with no credentials 6. # cd /var 7. # mtd_write -r write tmpFW mtd4 Unlocking mtd4 ... Writing from tmpFW to mtd4 ... [e] 8. When flash has completed, you will have booted into your firmware. >From U-boot via TFTP and initramfs: 1. Place openwrt-ramips-mt76x8-skw92a-initramfs-kernel.bin on a TFTP server 2. Connect to serial console at USB3 on EVB 3. Connect ethernet between port 1 (not WAN) and your TFTP server (e.g. 192.168.11.20) 4. Start terminal software (e.g. screen /dev/ttyUSB0 57600) on PC 5. Apply power to EVB 6. Interrupt u-boot with keypress of "1" 7. At u-boot prompts: Input device IP (10.10.10.123) ==:192.168.11.21 Input server IP (10.10.10.3) ==:192.168.11.20 Input Linux Kernel filename (root_uImage) ==:openwrt-ramips-mt76x8-skw92a-initramfs-kernel.bin 8. Move ethernet to port 0 (WAN) on EVB 9. At new OpenWrt console shell, fetch squashfs-sysupgrade image and flash with sysupgrade. >From U-boot via TFTP direct flash: 1. Place openwrt-ramips-mt76x8-skw92a-squashfs-sysupgrade.bin on a TFTP server 2. Connect to serial console at USB3 on EVB (57600 8N1) 3. Connect ethernet between port 1 (not WAN) an your TFTP server (e.g. 192.168.11.20) 4. Start terminal software (e.g. screen /dev/ttyUSB0 57600) on PC 5. Apply power to EVB 6. Interrupt u-boot with keypress of "2" 7. At u-boot prompts: Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) Y Input device IP (10.10.10.123) ==:192.168.11.21 Input server IP (10.10.10.3) ==:192.168.11.20 Input Linux Kernel filename (root_uImage) ==:openwrt-ramips-mt76x8-skw92a-squashfs-sysupgrade.bin 8. When transfer is complete or as OpenWrt begins booting, move ethernet to port 0 (WAN). Signed-off-by: Russell Senior <russell@personaltelco.net>
398 lines
10 KiB
Makefile
398 lines
10 KiB
Makefile
#
|
|
# MT76x8 Profiles
|
|
#
|
|
|
|
DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
|
|
|
|
define Build/mksercommfw
|
|
$(STAGING_DIR_HOST)/bin/mksercommfw \
|
|
$@ \
|
|
$(SERCOMM_KERNEL_OFFSET) \
|
|
$(SERCOMM_HWID) \
|
|
$(SERCOMM_HWVER) \
|
|
$(SERCOMM_SWVER)
|
|
endef
|
|
|
|
define Device/tplink
|
|
TPLINK_FLASHLAYOUT :=
|
|
TPLINK_HWID :=
|
|
TPLINK_HWREV :=
|
|
TPLINK_HWREVADD :=
|
|
TPLINK_HVERSION :=
|
|
KERNEL := $(KERNEL_DTB)
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
|
|
IMAGES += tftp-recovery.bin
|
|
IMAGE/factory.bin := tplink-v2-image -e
|
|
IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin)
|
|
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
|
|
|
|
|
|
define Device/alfa-network_awusfree1
|
|
DTS := AWUSFREE1
|
|
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
|
DEVICE_TITLE := ALFA Network AWUSFREE1
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += alfa-network_awusfree1
|
|
|
|
define Device/tama_w06
|
|
DTS := W06
|
|
IMAGE_SIZE := 15040k
|
|
DEVICE_TITLE := Tama W06
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += tama_w06
|
|
|
|
define Device/duzun-dm06
|
|
DTS := DUZUN-DM06
|
|
DEVICE_TITLE := DuZun DM06
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += duzun-dm06
|
|
|
|
define Device/gl-mt300n-v2
|
|
DTS := GL-MT300N-V2
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_TITLE := GL-iNet GL-MT300N-V2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += gl-mt300n-v2
|
|
|
|
define Device/hc5661a
|
|
DTS := HC5661A
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := HiWiFi HC5661A
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620
|
|
endef
|
|
TARGET_DEVICES += hc5661a
|
|
|
|
define Device/hiwifi_hc5861b
|
|
DTS := HC5861B
|
|
IMAGE_SIZE := 15808k
|
|
DEVICE_TITLE := HiWiFi HC5861B
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc5861b
|
|
|
|
define Device/LinkIt7688
|
|
DTS := LINKIT7688
|
|
IMAGE_SIZE := $(ralink_default_fw_size_32M)
|
|
SUPPORTED_DEVICES := linkits7688 linkits7688d
|
|
DEVICE_TITLE := MediaTek LinkIt Smart 7688
|
|
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += LinkIt7688
|
|
|
|
define Device/mac1200r-v2
|
|
DTS := MAC1200RV2
|
|
DEVICE_TITLE := Mercury MAC1200R v2.0
|
|
SUPPORTED_DEVICES := mac1200rv2
|
|
endef
|
|
TARGET_DEVICES += mac1200r-v2
|
|
|
|
define Device/miwifi-nano
|
|
DTS := MIWIFI-NANO
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := Xiaomi MiWiFi Nano
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += miwifi-nano
|
|
|
|
define Device/mt7628
|
|
DTS := MT7628
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := $(ralink_default_fw_size_4M)
|
|
DEVICE_TITLE := MediaTek MT7628 EVB
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += mt7628
|
|
|
|
define Device/netgear_r6120
|
|
DTS := R6120
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := Netgear AC1200 R6120
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SERCOMM_KERNEL_OFFSET := 0x90000
|
|
SERCOMM_HWID := CGQ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0040
|
|
IMAGES += factory.img
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img := $$(IMAGE/default) | mksercommfw
|
|
endef
|
|
TARGET_DEVICES += netgear_r6120
|
|
|
|
define Device/omega2
|
|
DTS := OMEGA2
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := Onion Omega2
|
|
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += omega2
|
|
|
|
define Device/omega2p
|
|
DTS := OMEGA2P
|
|
IMAGE_SIZE := $(ralink_default_fw_size_32M)
|
|
DEVICE_TITLE := Onion Omega2+
|
|
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
|
|
endef
|
|
TARGET_DEVICES += omega2p
|
|
|
|
define Device/pbr-d1
|
|
DTS := PBR-D1
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := PBR-D1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += pbr-d1
|
|
|
|
define Device/skw92a
|
|
DTS := SKW92A
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_TITLE := Skylab SKW92A
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += skw92a
|
|
|
|
define Device/tplink_tl-wa801nd-v5
|
|
$(Device/tplink)
|
|
DTS := TL-WA801NDV5
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-WA801ND v5
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x08010005
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HWREVADD := 0x5
|
|
TPLINK_HVERSION := 3
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wa801nd-v5
|
|
|
|
define Device/tl-wr840n-v4
|
|
$(Device/tplink)
|
|
DTS := TL-WR840NV4
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-WR840N v4
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x08400004
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HWREVADD := 0x4
|
|
TPLINK_HVERSION := 3
|
|
endef
|
|
TARGET_DEVICES += tl-wr840n-v4
|
|
|
|
define Device/tl-wr840n-v5
|
|
DTS := TL-WR840NV5
|
|
IMAGE_SIZE := 3904k
|
|
DEVICE_TITLE := TP-Link TL-WR840N v5
|
|
TPLINK_FLASHLAYOUT := 4Mmtk
|
|
TPLINK_HWID := 0x08400005
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HWREVADD := 0x5
|
|
TPLINK_HVERSION := 3
|
|
KERNEL := $(KERNEL_DTB)
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
|
|
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += tl-wr840n-v5
|
|
|
|
define Device/tl-wr841n-v13
|
|
$(Device/tplink)
|
|
DTS := TL-WR841NV13
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-WR841N v13
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x08410013
|
|
TPLINK_HWREV := 0x268
|
|
TPLINK_HWREVADD := 0x13
|
|
TPLINK_HVERSION := 3
|
|
endef
|
|
TARGET_DEVICES += tl-wr841n-v13
|
|
|
|
define Device/tplink_c20-v4
|
|
$(Device/tplink)
|
|
DTS := ArcherC20v4
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link ArcherC20 v4
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0xc200004
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HWREVADD := 0x4
|
|
TPLINK_HVERSION := 3
|
|
endef
|
|
TARGET_DEVICES += tplink_c20-v4
|
|
|
|
define Device/tplink_c50-v3
|
|
$(Device/tplink)
|
|
DTS := ArcherC50V3
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link ArcherC50 v3
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x001D9BA4
|
|
TPLINK_HWREV := 0x79
|
|
TPLINK_HWREVADD := 0x1
|
|
TPLINK_HVERSION := 3
|
|
endef
|
|
TARGET_DEVICES += tplink_c50-v3
|
|
|
|
define Device/tplink_tl-mr3020-v3
|
|
$(Device/tplink)
|
|
DTS := TL-MR3020V3
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-MR3020 v3
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x30200003
|
|
TPLINK_HWREV := 0x3
|
|
TPLINK_HWREVADD := 0x3
|
|
TPLINK_HVERSION := 3
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-mr3020-v3
|
|
|
|
define Device/tplink_tl-mr3420-v5
|
|
$(Device/tplink)
|
|
DTS := TL-MR3420V5
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-MR3420 v5
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x34200005
|
|
TPLINK_HWREV := 0x5
|
|
TPLINK_HWREVADD := 0x5
|
|
TPLINK_HVERSION := 3
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-mr3420-v5
|
|
|
|
define Device/tplink_tl-wr842n-v5
|
|
$(Device/tplink)
|
|
DTS := TL-WR842NV5
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-WR842N v5
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x08420005
|
|
TPLINK_HWREV := 0x5
|
|
TPLINK_HWREVADD := 0x5
|
|
TPLINK_HVERSION := 3
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr842n-v5
|
|
|
|
define Device/tplink_tl-wr902ac-v3
|
|
$(Device/tplink)
|
|
DTS := TL-WR902ACV3
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := TP-Link TL-WR902AC v3
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0x000dc88f
|
|
TPLINK_HWREV := 0x89
|
|
TPLINK_HWREVADD := 0x1
|
|
TPLINK_HVERSION := 3
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wr902ac-v3
|
|
|
|
define Device/u7628-01-128M-16M
|
|
DTS := U7628-01-128M-16M
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_TITLE := UniElec U7628-01 (128M RAM/16M flash)
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += u7628-01-128M-16M
|
|
|
|
define Device/vocore2
|
|
DTS := VOCORE2
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := VoCore VoCore2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
|
|
kmod-sdhci-mt7620
|
|
endef
|
|
TARGET_DEVICES += vocore2
|
|
|
|
define Device/vocore2lite
|
|
DTS := VOCORE2LITE
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := VoCore VoCore2-Lite
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
|
|
kmod-sdhci-mt7620
|
|
endef
|
|
TARGET_DEVICES += vocore2lite
|
|
|
|
define Device/wcr-1166ds
|
|
DTS := WCR-1166DS
|
|
BUFFALO_TAG_PLATFORM := MTK
|
|
BUFFALO_TAG_VERSION := 9.99
|
|
BUFFALO_TAG_MINOR := 9.99
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
IMAGE/factory.bin := \
|
|
trx -M 0x746f435c | pad-rootfs | append-metadata | \
|
|
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
|
|
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | \
|
|
buffalo-dhp-image
|
|
DEVICE_TITLE := Buffalo WCR-1166DS
|
|
endef
|
|
TARGET_DEVICES += wcr-1166ds
|
|
|
|
define Device/wl-wn575a3
|
|
DTS := WL-WN575A3
|
|
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
|
DEVICE_TITLE := Wavlink WL-WN575A3
|
|
endef
|
|
TARGET_DEVICES += wl-wn575a3
|
|
|
|
define Device/widora_neo-16m
|
|
DTS := WIDORA-NEO-16M
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := Widora-NEO (16M)
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += widora-neo
|
|
endef
|
|
TARGET_DEVICES += widora_neo-16m
|
|
|
|
define Device/widora_neo-32m
|
|
DTS := WIDORA-NEO-32M
|
|
IMAGE_SIZE := $(ralink_default_fw_size_32M)
|
|
DEVICE_TITLE := Widora-NEO (32M)
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += widora_neo-32m
|
|
|
|
define Device/wrtnode2p
|
|
DTS := WRTNODE2P
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := WRTnode 2P
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += wrtnode2p
|
|
|
|
define Device/wrtnode2r
|
|
DTS := WRTNODE2R
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := WRTnode 2R
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += wrtnode2r
|
|
|
|
define Device/zbtlink_zbt-we1226
|
|
DTS := ZBT-WE1226
|
|
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
|
DEVICE_TITLE := ZBTlink ZBT-WE1226
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we1226
|
|
|
|
define Device/zyxel_keenetic-extra-ii
|
|
DTS := ki_rb
|
|
IMAGE_SIZE := 14912k
|
|
BLOCKSIZE := 64k
|
|
DEVICE_TITLE := ZyXEL Keenetic Extra II
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to $$$$(BLOCKSIZE) | \
|
|
check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"
|
|
endef
|
|
TARGET_DEVICES += zyxel_keenetic-extra-ii
|