Pawel Dembicki 20b09a2125 ramips: add support for Lava LR-25G001 ... The Lava LR-25G001 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN) - 2x external, detachable antennas - 1x USB 2.0 - UART (J3) header on PCB (57600 8n1) - 8x LED (3x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - Work only three Gigabit ports (3/5, 1 WAN and 2LAN) Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>		2018-11-26 12:16:52 +01:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
Makefile	ramips: only limit lzma dictionary size on mt7621	2018-08-30 10:57:35 +02:00
mt76x8.mk	ramips: add support for Skylab SKW92A in EVB	2018-11-26 09:47:27 +01:00
mt7620.mk	ramips: add support for Lava LR-25G001	2018-11-26 12:16:52 +01:00
mt7621.mk	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
rt288x.mk	ramips: use patch-dtb for F5D8235 V1	2018-04-23 22:07:22 +02:00
rt305x-legacy.mk	ramips: use new image build code for WHR-G300N	2018-02-13 10:01:53 +01:00
rt305x.mk	ramips: fix ethernet for f5d8235-v2 board	2018-11-26 09:58:17 +01:00
rt3883.mk	ramips: add support for Loewe WMDR-143N	2017-07-27 09:13:27 +02:00