openwrt/target/linux/layerscape/patches-5.4/701-net-0342-LF-376-enetc-disable-EEE-autoneg-by-default.patch
Yangbo Lu cddd459140 layerscape: add patches-5.4
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-05-07 12:53:06 +02:00

39 lines
1.3 KiB
Diff

From cb87015e005f429bff6fc084a61281235ca83d51 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Fri, 6 Dec 2019 12:41:48 +0800
Subject: [PATCH] LF-376 enetc: disable EEE autoneg by default
The EEE support has not been enabled on ENETC, but it may connect
to a PHY which supports EEE and advertises EEE by default, while
its link partner also advertises EEE. If this happens, the PHY enters
low power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
ENETC connects to, to prevent the above unwanted outcome.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1369,6 +1369,7 @@ static int enetc_phy_connect(struct net_
{
struct enetc_ndev_priv *priv = netdev_priv(ndev);
struct phy_device *phydev;
+ struct ethtool_eee edata;
if (!priv->phy_node)
return 0; /* phy-less mode */
@@ -1382,6 +1383,10 @@ static int enetc_phy_connect(struct net_
phy_attached_info(phydev);
+ /* disable EEE autoneg, until ENETC driver supports it */
+ memset(&edata, 0, sizeof(struct ethtool_eee));
+ phy_ethtool_set_eee(phydev, &edata);
+
return 0;
}