openwrt/target/linux/lantiq
Thomas Nixon 50e3659703 lantiq: add Netgear DM200 support
Netgear DM200 is an inexpensive VDSL modem:

    CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz
    RAM: 64MiB
    Flash: 8MiB
    Ethernet: 1x100M
    DSL: VDSL2+, ADSL2+
    reset button, 3x bi-color LEDs

Serial port is 115200 baud, on the 4 pin header; pins from the bottom to
top are GND, RX, TX.

To upgrade from the vendor firmware, upload factory.img

The DM200 bootloader supports flashing over TFTP; hold the reset button
while powering on the device, and wait for the power light to start
flashing green before releasing. The device is now listening on
192.168.0.1/24, and can be sent a factory.img or a netgear image with a
TFTP put.

Once the image is loaded, it will be written to the flash, and the
device will reboot; this will take a few minutes.

Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their
own ports for this device and provided valuable feedback.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
2017-07-07 07:13:24 +02:00
..
ase lantiq: add Amazon-SE subtarget 2017-06-03 21:14:07 +02:00
base-files lantiq: add Netgear DM200 support 2017-07-07 07:13:24 +02:00
dts lantiq: add Netgear DM200 support 2017-07-07 07:13:24 +02:00
falcon build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
files/firmware/lantiq move GPHY FW blobs to non versioned folder 2013-03-14 18:42:21 +00:00
image lantiq: add Netgear DM200 support 2017-07-07 07:13:24 +02:00
patches-4.4 kernel: move Lantiq PEF7061/7071/7072 phy driver to generic 2017-06-24 22:36:38 +02:00
patches-4.9 kernel: update kernel 4.9 to 4.9.34 2017-06-27 07:21:03 +02:00
xrx200 lantiq: add support for kernel 4.9 2017-02-11 23:44:13 +01:00
xway build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
xway_legacy build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
config-4.4 kernel: cleanup CONFIG_SCHED_HRTICK 2017-06-29 04:46:59 +02:00
config-4.9 kernel: cleanup CONFIG_SCHED_HRTICK 2017-06-29 04:46:59 +02:00
Makefile lantiq: add Amazon-SE subtarget 2017-06-03 21:14:07 +02:00
modules.mk fix i2c-lantiq module 2012-12-16 10:03:18 +00:00