ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 17:48:58 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
4b6e7da0f7
openwrt/package/boot/uboot-mediatek/patches/453-add-openwrt-one.patch
John Crispin 5af4d4f6b6 uboot-mediatek: increase USB probe delay on OpenWrt One 
This solves compatibility issues with some pendrives.
Originally reported by "HIDE-r" on the forum.

Signed-off-by: John Crispin <john@phrozen.org>
2024-12-02 13:55:36 +01:00

585 lines
19 KiB
Diff
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

--- /dev/null
+++ b/arch/arm/dts/openwrt-one.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 John Crispin <john@phrozen.org>
+ */
+
+/dts-v1/;
+#include "mt7981.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "OpenWrt One";
+ compatible = "openwrt,one", "mediatek,mt7981";
+ chosen {
+ stdout-path = &uart0;
+ tick-timer = &timer0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x10000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "front";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ reset {
+ label = "back";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ label = "red";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ white {
+ label = "white";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+ mediatek,gmac-id = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+
+ phy0: eth-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ spi_flash_pins: spi0-pins-func-1 {
+ mux {
+ function = "flash";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ spi2_flash_pins: spi2-spi2-pins {
+ mux {
+ function = "spi";
+ groups = "spi2", "spi2_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
+ };
+
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
+ };
+ };
+};
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@200000 {
+ label = "ubi";
+ reg = <0x100000 0xff00000>;
+ };
+ };
+ };
+};
+
+&spi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_flash_pins>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@00000 {
+ label = "bl2-nor";
+ reg = <0x00000 0x0040000>;
+ };
+
+ partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x00C0000>;
+ };
+
+ partition@100000 {
+ label = "fip-nor";
+ reg = <0x100000 0x0080000>;
+ };
+
+ partition@180000 {
+ label = "recovery";
+ reg = <0x180000 0xc80000>;
+ };
+ };
+ };
+};
+
+&watchdog {
+ status = "disabled";
+};
--- /dev/null
+++ b/configs/mt7981_openwrt-one-nor_defconfig
@@ -0,0 +1,128 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_DEFAULT_DEVICE_TREE="openwrt-one"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_TARGET_MT7981=y
+CONFIG_RESET_BUTTON_LABEL="back"
+CONFIG_DEBUG_UART_BASE=0x11002000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_SYS_LOAD_ADDR=0x46000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_SPI_BOOT=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="openwrt-one"
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=1049
+CONFIG_LOGLEVEL=7
+CONFIG_LOG=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="OpenWrt One> "
+CONFIG_SYS_MAXARGS=16
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_STRINGS=y
+# CONFIG_CMD_UNLZ4 is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PSTORE=y
+CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+CONFIG_CMD_UUID=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_UBI_RENAME=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_DEFAULT_ENV_FILE=y
+CONFIG_DEFAULT_ENV_FILE="openwrt-one-nor_env"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK=y
+CONFIG_GPIO_HOG=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+# CONFIG_MTD_RAW_NAND is not set
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_UBI_SILENCE_MSG=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7981=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_MTK=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MTK=y
+CONFIG_USB_STORAGE=y
+CONFIG_UBIFS_SILENCE_MSG=y
+CONFIG_HEXDUMP=y
+CONFIG_LMB_MAX_REGIONS=64
--- /dev/null
+++ b/configs/mt7981_openwrt-one-spi-nand_defconfig
@@ -0,0 +1,129 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="openwrt-one"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_TARGET_MT7981=y
+CONFIG_RESET_BUTTON_LABEL="back"
+CONFIG_DEBUG_UART_BASE=0x11002000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_SYS_LOAD_ADDR=0x46000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_SPI_BOOT=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="openwrt-one"
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=1049
+CONFIG_LOGLEVEL=7
+CONFIG_LOG=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="OpenWrt One> "
+CONFIG_SYS_MAXARGS=16
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_STRINGS=y
+# CONFIG_CMD_UNLZ4 is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PSTORE=y
+CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+CONFIG_CMD_UUID=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_UBI_RENAME=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_UBI_PART="ubi"
+CONFIG_ENV_UBI_VOLUME="ubootenv"
+CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_DEFAULT_ENV_FILE=y
+CONFIG_DEFAULT_ENV_FILE="openwrt-one-spi-nand_env"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK=y
+CONFIG_GPIO_HOG=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+# CONFIG_MTD_RAW_NAND is not set
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7981=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_MTK=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MTK=y
+CONFIG_USB_STORAGE=y
+CONFIG_HEXDUMP=y
+CONFIG_LMB_MAX_REGIONS=64
--- /dev/null
+++ b/openwrt-one-nor_env
@@ -0,0 +1,48 @@
+ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory
+bl2_mtd_write=mtd erase bl2-nor && mtd write bl2-nor $loadaddr 0x0 0x40000
+bl2_tftp_write=tftpboot $loadaddr $bootfile_bl2_nor && run bl2_mtd_write
+bootcmd=run check_button ; run led_start ; mtd read recovery ${loadaddr} ; bootm ; run led_loop_error
+bootconf=config-1
+bootdelay=0
+bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb
+bootfile_bl2_nor=openwrt-mediatek-filogic-openwrt_one-nor-preloader.bin
+bootfile_fip_nor=openwrt-mediatek-filogic-openwrt_one-nor-bl31-uboot.fip
+bootmenu_0=Initialize environment.=run _firstboot
+bootmenu_0d=Run default boot command.=run bootcmd
+bootmenu_1=Boot system via TFTP.=run tftp_boot ; run bootmenu_confirm_return
+bootmenu_2=Unlock NOR. (Make sure the NOR/WP jumper is populated)=sf probe 1:0 && sf protect unlock 0x0 0x1000000 ; run bootmenu_confirm_return
+bootmenu_3=Load BL31+U-Boot FIP via TFTP then write to NOR.=run fip_tftp_write ; run bootmenu_confirm_return
+bootmenu_4=Load BL2 preloader via TFTP then write to NOR.=run bl2_tftp_write ; run bootmenu_confirm_return
+bootmenu_5=Load recovery system via TFTP then write to NOR.=run tftp_write ; run bootmenu_confirm_return
+bootmenu_6=Lock NOR. (Remove jumper afterwards)=sf probe 1:0 && sf protect lock 0x0 0x1000000 ; run bootmenu_confirm_return
+bootmenu_7=Reboot.=reset
+bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
+bootmenu_default=0
+bootmenu_delay=0
+bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NOR]
+check_button=if button front ; then run usb_recovery ; run led_loop_error ; fi
+fip_mtd_write=mtd erase fip-nor && mtd write fip-nor $loadaddr
+fip_tftp_write=tftpboot $loadaddr $bootfile_fip_nor && run fip_mtd_write
+ipaddr=192.168.11.11
+led_done=led green off ; led white on
+led_loop_done=led white off ; led green on ; echo done ; while true ; do sleep 1 ; done
+led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done
+led_boot=led green on ; led white on ; led red on
+led_start=led green off ; led red off; led white on
+loadaddr=0x46000000
+preboot=run led_boot
+recoverfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin
+recoverfile_ubi=openwrt-mediatek-filogic-openwrt_one-factory.ubi
+recovery_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000; do mtd write bl2 $loadaddr $offset 0x40000 ; done
+recovery_write_ubi=mtd erase ubi && mtd write ubi $loadaddr 0 ${filesize}
+serverip=192.168.11.23
+tftp_boot=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
+tftp_write=run led_start ; tftpboot $loadaddr $bootfile && mtd erase recovery 0x0 ${filesize} && mtd write recovery $loadaddr 0x0 ${filesize}
+usb_pgood_delay=4000
+usb_recovery=run led_start ; usb start && run usb_recovery_bl2 && run usb_recovery_ubi && run led_loop_done
+usb_recovery_bl2=fatload usb 0:1 ${loadaddr} ${recoverfile_bl2} && run recovery_write_bl2
+usb_recovery_ubi=fatload usb 0:1 ${loadaddr} ${recoverfile_ubi} && run recovery_write_ubi
+_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu
+_init_env=setenv _init_env ; echo Initialize Env ; run ubi_create_env ; saveenv
+_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"
--- /dev/null
+++ b/openwrt-one-spi-nand_env
@@ -0,0 +1,61 @@
+ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory
+ipaddr=192.168.11.11
+serverip=192.168.11.23
+loadaddr=0x46000000
+console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
+bootcmd=run check_buttons ; run led_start ; run boot_calibration ; run boot_production ; run boot_recovery
+bootconf=config-1
+bootdelay=0
+bootfile=openwrt-mediatek-filogic-openwrt_one-initramfs.itb
+bootfile_bl2=openwrt-mediatek-filogic-openwrt_one-snand-preloader.bin
+bootfile_fip=openwrt-mediatek-filogic-openwrt_one-snand-bl31-uboot.fip
+bootfile_upg=openwrt-mediatek-filogic-openwrt_one-squashfs-sysupgrade.itb
+bootmenu_confirm_return=askenv - Press ENTER to return to menu ; run led_boot ; bootmenu 60
+bootmenu_default=0
+bootmenu_delay=0
+bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NAND]
+bootmenu_0=Initialize environment.=run _firstboot
+bootmenu_0d=Run default boot command.=run boot_default
+bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
+bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
+bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
+bootmenu_4=Load production system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_production ; noboot= ; replacevol= ; run bootmenu_confirm_return
+bootmenu_5=Load recovery system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_recovery ; noboot= ; replacevol= ; run bootmenu_confirm_return
+bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
+bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
+bootmenu_8=Reboot.=reset
+bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
+boot_default=run bootcmd ; run boot_recovery ; replacevol=1 ; run boot_tftp_forever
+boot_calibration=ubi read $loadaddr calibration && bootm $loadaddr#$bootconf
+boot_production=led white on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led white off
+boot_recovery=led green on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led green off
+boot_tftp=run led_start ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
+boot_tftp_forever=led green off ; led white off ; led red on ; while true ; do run boot_tftp_recovery ; led red off ; sleep 1 ; done
+boot_tftp_production=tftpboot $loadaddr $bootfile_upg && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_production ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp_recovery=tftpboot $loadaddr $bootfile && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_recovery ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory
+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2
+check_buttons=if button front ; then run boot_recovery ; run boot_tftp ; run led_loop_error ; else if button back ; then ; run usb_recover ; run led_loop_error ; fi ; fi
+led_boot=led green on ; led white on ; led red on
+led_done=led green on ; led white off ; led red off
+led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done
+led_start=led white on ; led green off ; led red off
+preboot=run led_boot
+reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data
+snand_write_bl2=mtd erase bl2 && for offset in 0x0 0x40000 0x80000 0xc0000 ; do mtd write bl2 $loadaddr $offset 0x40000 ; done
+ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic
+ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
+ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
+ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
+ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
+usb_pgood_delay=4000
+usb_recover=run led_start ; usb start && run usb_recover_production && run led_loop_done
+usb_recover_production=fatload usb 0:1 ${loadaddr} ${bootfile_upg} && iminfo $loadaddr && run ubi_write_production
+ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip $filesize static && ubi write $loadaddr fip $filesize
+ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
+ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
+_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
+_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu
+_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"
Reference in New Issue View Git Blame Copy Permalink