openwrt/package/boot
Shymon Samsel 4b6e7da0f7 ipq807x: add support for TP-Link EAP620 HD v1
Specifications:
  * SoC: Qualcomm IPQ8072A (64-bit Quad-core Arm Cortex-A53 @ 1.4 GHz)
  * Memory: 2x ESMT M15T4G16256A-DEBG2G (1 GiB DDR3-1866 13-13-13)
  * Serial Port: 3v3 TTL 115200n8
  * Wi-Fi: QCA5054 (4x4 5 GHz 802.11ax)
  * Wi-Fi: QCN5024 (2x2 2.4 GHz 802.11b/g/n/ax)
  * Ethernet: AR8031 (10/100/1000BASE-T)
  * Flash: Winbond W29N01HZSINF (128 MiB)
  * LEDs: 1x Blue Status (GPIO 42 Active High)
  * Buttons: 1x Reset (GPIO 50 Active Low)

Installation Instructions (Serial+TFTP):
  1. Solder 4 pin header to JP1 and bridge pads of R58 and R62.
  2. Connect 3V3 TTL port to TX, RX, and GND, which are positions 1, 2, and 3 respectively.
     Be sure to crossover TX and RX.
  3. Copy RAM firmware
     openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-initramfs-uImage.itb
     to a TFTP server's root that is in the same subnet as your AP.
  4. Power up the AP hold Ctrl+B in the serial console (115200n8) until autoboot is halted.
  5. Run the following commands in the U-boot prompt:
     # setenv serverip <TFTP server addr>
     # setenv ipaddr <addr of AP>
     # tftpboot 0x44000000 openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-initramfs-uImage.itb
     # bootm
     You may need to type Ctrl+C and Enter before running these commands
     to clear invisible characters from the buffer.
  6. Run the following command in a terminal to copy the sysupgrade image
     to be installed (check IP address):
     $ scp -O openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
  7. Activate the OpenWrt serial console and run the following commands:
     # cd /tmp
     # sysupgrade -n openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-squashfs-sysupgrade.bin
  8. The AP will reboot and OpenWrt will be successfully installed.

Known Issues:
  * 5GHz radio instability (upstream current ath11k build bug maybe?)

Device support directly followed from EAP660HDv1 support
Links: #15832

Signed-off-by: Shymon Samsel <ssamsel@umass.edu>
Link: https://github.com/openwrt/openwrt/pull/17254
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-12-22 11:36:23 +01:00
..
apex treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
arm-trusted-firmware-bcm63xx treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add mt7986-spim-nand-ddr3 build 2024-11-30 18:36:05 +01:00
arm-trusted-firmware-mvebu arm-trusted-firmware-mvebu: refresh cryptopp hash 2024-04-29 13:02:23 +02:00
arm-trusted-firmware-rockchip treewide: update contact information 2024-09-11 00:37:34 +02:00
arm-trusted-firmware-stm32 arm-trusted-firmware-stm32: add ATF for stm32 boards 2024-11-23 15:53:21 +01:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Update to 2.10 2023-12-20 10:53:48 +08:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: fix build on macOS/Darwin 2023-08-12 16:45:47 +02:00
at91bootstrap at91bootstrap: update PKG_MIRROR_HASH to zstd for v3 at91bootstrap 2024-04-07 17:10:30 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: add EFI support for loongarch64 2024-05-04 14:14:24 +08:00
imx-bootlets imx-bootlets: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
kexec-tools kexec-tools: fix multiple compile errors 2024-06-08 14:08:38 +02:00
kobs-ng kobs-ng: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
opensbi opensbi: bump to 1.4 2024-05-03 11:09:22 +02:00
optee-os-stm32 optee-os-stm32: add OP-TEE for stm32 boards 2024-11-23 15:53:21 +01:00
rkbin rkbin: add rk3588 support 2024-08-11 18:56:27 +02:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2024-09-24 12:29:06 +02:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-10 21:50:22 +02:00
uboot-at91 treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
uboot-ath79 uboot-ath79: refresh patches 2024-10-19 17:56:46 +02:00
uboot-bcm53xx uboot-bcm53xx: bump to 2024.01 2024-01-20 19:38:20 +01:00
uboot-bcm4908 packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-bmips uboot-bmips: Add U-Boot for the BMIPS target 2024-05-01 21:30:32 +02:00
uboot-d1 uboot-d1: define default BUILD_SUBTARGET 2024-04-13 13:41:41 +02:00
uboot-envtools ipq807x: add support for TP-Link EAP620 HD v1 2024-12-22 11:36:23 +01:00
uboot-fritz4040 treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood uboot-kirkwood: fix compilation with GCC14 2024-09-25 22:50:09 +02:00
uboot-lantiq uboot-laniq: fix compilation with GCC14 2024-09-08 11:49:20 +02:00
uboot-layerscape uboot-layerscape: bump to lf-6.6.23-2.0.0 2024-09-22 16:21:02 +02:00
uboot-mediatek uboot-mediatek: increase USB probe delay on OpenWrt One 2024-12-02 13:55:36 +01:00
uboot-mvebu uboot-mvebu: update to version 2024.10 2024-10-19 22:54:12 +02:00
uboot-mxs packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip uboot-rockchip: add support for NanoPi R3S 2024-10-27 14:57:51 +01:00
uboot-sifiveu packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-stm32 uboot-stm32: add U-Boot for stm32 boards 2024-11-23 15:53:21 +01:00
uboot-sunxi sunxi: add support for Lichee Pi Zero Dock (V3s) board 2024-05-04 00:41:02 +02:00
uboot-tegra uboot-tegra: Set UBOOT_USE_INTREE_DTC 2024-06-02 18:06:39 +02:00
uboot-zynq packages: refresh patches 2024-05-31 11:30:06 +02:00