openwrt/package/boot
Yanase Yuki 4a77a060ab ipq40xx: add support for Buffalo WTR-M2133HP
Buffalo WTR-M2133HP is a Tri-Band router based on IPQ4019.

Specification
-------------
- SoC: Qualcomm IPQ4019
- RAM: 512MiB
- Flash Memory: NAND 128MiB (MXIC MX30LF1G18AC)
- Wi-Fi: Qualcomm IPQ4019 (2.4GHz, 1ch - 13ch)
- Wi-Fi: Qualcomm IPQ4019 (5GHz, 36ch - 64ch)
- Wi-Fi: Qualcomm QCA9984 (2T2R, 5GHz, 100ch - 140ch)
- Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN)
- LED: 4x white LED, 4x orange LED, 1x blue LED
- USB: 1x USB 3.0 port
- Input: 2x tactile switch, 2x slide switch (2x SP3T)
- Serial console: 115200bps, pinheader JP5 on PCB
- Power: DC 12V 2A

Flash instruction
-----------------
1. Set up a TFTP server (IP address: 192.168.11.10)
2. Rename "initramfs-fit-uImage.itb" to "WTR-M2133HP-initramfs.uImage"
   and put it into the TFTP server directory.
3. Connect the TFTP server and WTR-M2133HP.
4. Hold down the AOSS button, then power on the router.
5. After booting OpenWrt initramfs image, connect to the router by SSH.
6. Transfer "squashfs-nand-factory.ubi" to the router.
7. Execute the following commands.
    # ubidetach -p /dev/mtd15
    # ubiformat /dev/mtd15 -f /tmp/openwrt-ipq40xx-generic-buffalo_wtr-m2133hp-squashfs-nand-factory.ubi
    # fw_setenv bootcmd bootipq
8. Perform reboot.

Recover to stock firmware
-------------------------
1. Execute the following command.
    # fw_setenv bootcmd bootbf
2. Reboot and wait several minutes.

Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
2020-07-08 16:07:05 +02:00
..
arm-trusted-firmware-mvebu packages/boot: bump arm-trusted-firmware-mvebu version 2020-02-22 18:21:37 +01:00
arm-trusted-firmware-rockchip arm-trusted-firmware-rockchip: add new package 2020-04-20 16:37:56 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Replace with official ARM version 2019-01-13 17:35:14 +01:00
at91bootstrap at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig 2019-08-17 23:08:44 +02:00
fconfig fconfig: cleanup Makefile 2019-04-06 19:14:06 +02:00
grub2 grub2: fix build when ASLR enabled 2020-04-02 13:42:26 +01:00
imx-bootlets treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
kexec-tools x86: make crashdump works 2020-03-20 21:45:06 +00:00
kobs-ng kobs-ng: add header for integer definitions 2017-11-16 22:56:54 +01:00
tfa-layerscape layerscape: update tfa to LSDK-20.04 2020-05-07 12:53:06 +02:00
uboot-ar71xx uboot-ar71xx: fix musl host build 2019-01-22 13:29:46 +01:00
uboot-at91 uboot-at91: fix -Wformat-security 2019-08-17 23:08:10 +02:00
uboot-envtools ipq40xx: add support for Buffalo WTR-M2133HP 2020-07-08 16:07:05 +02:00
uboot-fritz4040 ipq40xx: add support for AVM FRITZ!Repeater 1200 2019-10-23 01:17:28 +02:00
uboot-imx6 uboot-imx6: bump to 2020.04 release 2020-04-17 13:43:34 +02:00
uboot-kirkwood uboot-kirkwood: add support for Zyxel NSA310S 2020-07-08 16:07:05 +02:00
uboot-lantiq uboot-lantiq: fix compile with modern host dtc 2018-10-07 02:12:06 +02:00
uboot-layerscape layerscape: update u-boot to LSDK-20.04 2020-05-07 12:53:06 +02:00
uboot-mediatek mediatek: add uboot 2020-05-04 16:31:19 +02:00
uboot-mvebu mvebu: uDPU: switch default kernel and U-Boot PHY mode 2020-05-09 14:34:23 +02:00
uboot-mxs uboot-mxs: bump to v2020.04 2020-06-03 16:49:28 +02:00
uboot-omap omap: support booting off different mmc devices 2019-11-20 10:46:19 +01:00
uboot-oxnas uboot-oxnas: fix memory leak in tool mkox820crc 2020-01-15 23:15:19 +01:00
uboot-ramips ramips: add support for RAVPower RP-WD009 2020-06-29 12:24:01 +02:00
uboot-rockchip uboot-rockchip: fix ident string 2020-04-20 16:44:17 +02:00
uboot-sunxi uboot-sunxi: bump to 2020.04 relase 2020-04-17 13:43:34 +02:00
uboot-tegra tegra: add vendor string to device name 2019-05-15 13:34:23 +02:00
uboot-zynq uboot-zynq: update to 2019.07 2019-09-01 18:38:05 +02:00