openwrt/target/linux/ramips/image
J. Scott Heppler 168e4c91d8 ramips: add support for TRENDnet TEW-810DR
Specifications:

* MediaTek MT7620A (580 Mhz)
* 8 MB of FLASH
* 64 MB of RAM
* 2.4Ghz and 5.0Ghz radios
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* UART header on PCB (57600 8n1)
* Green/Orange Power LEDs illuminating a Power-Button Lens
* Green/Orange Internet LEDs GPIO controlled illuminating a Globe/Internet Lens
* 3x button - wps, power and reset
* U-boot bootloader

Installation:

The sysupgrade.bin image is reported to be OEM web flashed with an ncc_att_hwid
appended.  ncc_att_hwid is a 32bit binary in the GPL Source download for either
the TEW-810DR or DIR-810L and is located at
source/user/wolf/cameo/ncc/hostTools.

The invocation is: ncc_att_hwid -f tew-810dr-squashfs-factory.bin -a -m "TEW-810DR" -H "1.0R" -r "WW" -c "1.0"

This may need to be altered if your hardware version is "1.1R".

The image can also be directly flashed via serial tftp:
1.  Load *.sysupgrade.bin to your tftp server directory and rename for
    convenience.
2.  Set a static ip 192.168.10.100.
3.  NIC cable to a lan port.
4.  Serial connection parameters 57600,8N1
5.  Power on the TEW-810 and press 4 for a u-boot command line prompt.
6.  Verify IP's with U-Boot command "printenv".
7.  Adjust tftp settings if needed per the tftp documentation
8.  Boot the tftp image to test the build.
9.  If the image loads, reset your server ip to 192.168.1.10 and restart network.
10. Log in to Luci, 192.168.1.1, and flash the *sysupgrade.bin image.

Notes:

The only valid MAC address is found in 0x28 of the factory partition.
Other typical offsets/caldata only contain example data: 00:11:22:00:0f:xx

Signed-off-by: J. Scott Heppler <shep971@centurylink.net>
[remove "link rx tx" in 01_leds, format and extend commit message,
fix DTS led node names]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-26 22:04:11 +02:00
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 2018-06-21 06:54:42 +02:00
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 2020-03-21 20:02:55 +01:00
Makefile ramips: add support for netis WF2770 2020-05-17 18:41:48 +02:00
mt76x8.mk ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1 2020-05-24 18:14:59 +02:00
mt7620.mk ramips: add support for TRENDnet TEW-810DR 2020-05-26 22:04:11 +02:00
mt7621.mk ramips: add alternative name for Buffalo WSR-2533DHP 2020-05-24 18:14:59 +02:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt3883.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00