mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1
Specifications: - MT7628NN @ 580 MHz - 32 MB RAM - 8 MB Flash - 5x 10/100 Mbps Ethernet (built-in switch) - 2.4 GHz WLAN - 2x external, non-detachable antennas (1x for RT-N10P V3) Flash instructions: 1. Set PC network interface to 192.168.1.75/24. 2. Connect PC to the router via LAN. 3. Turn router off, press and hold reset button, then turn it on. 4. Keep the button pressed till power led starts to blink. 5. Upload the firmware file via TFTP. (Any filename is accepted.) 6. Wait until the router reboots. Signed-off-by: Ernst Spielmann <endspiel@disroot.org> [fix node/property name for state_default] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
parent
a765b063ee
commit
c3dc52e39a
target/linux/ramips
dts
mt7628an_asus_rt-n10p-v3.dtsmt7628an_asus_rt-n11p-b1.dtsmt7628an_asus_rt-n12-vp-b1.dtsmt7628an_asus_rt-n1x.dtsi
image
mt76x8/base-files/etc/board.d
34
target/linux/ramips/dts/mt7628an_asus_rt-n10p-v3.dts
Normal file
34
target/linux/ramips/dts/mt7628an_asus_rt-n10p-v3.dts
Normal file
@ -0,0 +1,34 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an_asus_rt-n1x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "asus,rt-n10p-v3", "mediatek,mt7628an-soc";
|
||||
model = "Asus RT-N10P V3";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "rt-n10p-v3:green:power";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "rt-n10p-v3:green:wlan";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "rt-n10p-v3:green:wan";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "rt-n10p-v3:green:lan";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
34
target/linux/ramips/dts/mt7628an_asus_rt-n11p-b1.dts
Normal file
34
target/linux/ramips/dts/mt7628an_asus_rt-n11p-b1.dts
Normal file
@ -0,0 +1,34 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an_asus_rt-n1x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "asus,rt-n11p-b1", "mediatek,mt7628an-soc";
|
||||
model = "Asus RT-N11P B1";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "rt-n11p-b1:green:power";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "rt-n11p-b1:green:wlan";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "rt-n11p-b1:green:wan";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "rt-n11p-b1:green:lan";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
34
target/linux/ramips/dts/mt7628an_asus_rt-n12-vp-b1.dts
Normal file
34
target/linux/ramips/dts/mt7628an_asus_rt-n12-vp-b1.dts
Normal file
@ -0,0 +1,34 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an_asus_rt-n1x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "asus,rt-n12-vp-b1", "mediatek,mt7628an-soc";
|
||||
model = "Asus RT-N12 VP B1";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "rt-n12-vp-b1:green:power";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "rt-n12-vp-b1:green:wlan";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "rt-n12-vp-b1:green:wan";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "rt-n12-vp-b1:green:lan";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
100
target/linux/ramips/dts/mt7628an_asus_rt-n1x.dtsi
Normal file
100
target/linux/ramips/dts/mt7628an_asus_rt-n1x.dtsi
Normal file
@ -0,0 +1,100 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "p0led_an", "p1led_an", "refclk", "wled_an";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
@ -14,6 +14,30 @@ define Device/alfa-network_awusfree1
|
||||
endef
|
||||
TARGET_DEVICES += alfa-network_awusfree1
|
||||
|
||||
define Device/asus_rt-n10p-v3
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Asus
|
||||
DEVICE_MODEL := RT-N10P
|
||||
DEVICE_VARIANT := V3
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-n10p-v3
|
||||
|
||||
define Device/asus_rt-n11p-b1
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Asus
|
||||
DEVICE_MODEL := RT-N11P
|
||||
DEVICE_VARIANT := B1
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-n11p-b1
|
||||
|
||||
define Device/asus_rt-n12-vp-b1
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Asus
|
||||
DEVICE_MODEL := RT-N12 VP
|
||||
DEVICE_VARIANT := B1
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-n12-vp-b1
|
||||
|
||||
define Device/buffalo_wcr-1166ds
|
||||
IMAGE_SIZE := 7936k
|
||||
BUFFALO_TAG_PLATFORM := MTK
|
||||
|
@ -20,6 +20,12 @@ case $board in
|
||||
alfa-network,awusfree1)
|
||||
set_wifi_led "$boardname:blue:wlan"
|
||||
;;
|
||||
asus,rt-n10p-v3|\
|
||||
asus,rt-n11p-b1|\
|
||||
asus,rt-n12-vp-b1)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0xf"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
||||
;;
|
||||
cudy,wr1000)
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
|
||||
|
@ -26,6 +26,18 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch_attr "switch0" "enable" "false"
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
asus,rt-n10p-v3|\
|
||||
asus,rt-n11p-b1|\
|
||||
asus,rt-n12-vp-b1|\
|
||||
hiwifi,hc5661a|\
|
||||
mediatek,mt7628an-eval-board|\
|
||||
mercury,mac1200r-v2|\
|
||||
totolink,lr1200|\
|
||||
wavlink,wl-wn570ha1|\
|
||||
wavlink,wl-wn575a3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
buffalo,wcr-1166ds)
|
||||
ucidef_add_switch "switch0" \
|
||||
"3:lan" "4:wan" "6@eth0"
|
||||
@ -67,15 +79,6 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
|
||||
;;
|
||||
hiwifi,hc5661a|\
|
||||
mediatek,mt7628an-eval-board|\
|
||||
mercury,mac1200r-v2|\
|
||||
totolink,lr1200|\
|
||||
wavlink,wl-wn570ha1|\
|
||||
wavlink,wl-wn575a3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
hiwifi,hc5761a)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "4:wan" "6@eth0"
|
||||
|
Loading…
Reference in New Issue
Block a user