mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
3ad229db0b
This adds support for the MikroTik RouterBOARD RBD53iG-5HacD2HnD (hAP ac³), a indoor dual band, dual-radio 802.11ac wireless AP with external omnidirectional antennae, USB port, five 10/100/1000 Mbps Ethernet ports and PoE passthrough. See https://mikrotik.com/product/hap_ac3 for more info. Specifications: - SoC: Qualcomm Atheros IPQ4019 - RAM: 256 MB - Storage: 16 MB NOR + 128 MB NAND - Wireless: · Built-in IPQ4019 (SoC) 802.11b/g/n 2x2:2, 3 dBi antennae · Built-in IPQ4019 (SoC) 802.11a/n/ac 2x2:2, 5.5 dBi antennae - Ethernet: Built-in IPQ4019 (SoC, QCA8075) , 5x 1000/100/10 port, passive PoE in, PoE passtrough on port 5 - 1x USB Type A port Installation: 1. Boot the initramfs image via TFTP 2. Run "cat /proc/mtd" and look for "ubi" partition mtd device number, ex. "mtd1" 3. Use ubiformat to remove MikroTik specific UBI volumes * Detach the UBI partition by running: "ubidetach -d 0" * Format the partition by running: "ubiformat /dev/mtdN -y" Replace mtdN with the correct mtd index from step 2. 3. Flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Robert Marko <robimarko@gmail.com> Tested-by: Mark Birss <markbirss@gmail.com> Tested-by: Michael Büchler <michael.buechler@posteo.net> Tested-by: Alex Tomkins <tomkins@darkzone.net> |
||
---|---|---|
.. | ||
board-8dev_habanero-dvk.qca4019 | ||
board-aruba_ap-303.qca4019 | ||
board-avm_fritzrepeater-1200.qca4019 | ||
board-buffalo_wtr-m2133hp.qca4019 | ||
board-buffalo_wtr-m2133hp.qca9984 | ||
board-cellc_rtl30vw.qca4019 | ||
board-devolo_magic-2-wifi-next.qca4019 | ||
board-dlink_dap2610.qca4019 | ||
board-edgecore_ecw5410.qca9984 | ||
board-edgecore_oap100.qca4019 | ||
board-engenius_eap2200.qca4019 | ||
board-engenius_eap2200.qca9888 | ||
board-engenius_emd1.qca4019 | ||
board-engenius_emr3500.qca4019 | ||
board-ezviz_cs-w3-wd1200g-eup.qca4019 | ||
board-glinet_gl-ap1300.qca4019 | ||
board-glinet_gl-s1300.qca4019 | ||
board-linksys_ea8300.qca4019 | ||
board-linksys_ea8300.qca9888 | ||
board-linksys_mr8300-v0.qca4019 | ||
board-linksys_mr8300-v0.qca9888 | ||
board-luma_wrtq-329acn.qca4019 | ||
board-mikrotik_hap-ac2.qca4019 | ||
board-mikrotik_hap-ac3.qca4019 | ||
board-mikrotik_sxtsq-5-ac.qca4019 | ||
board-mobipromo_cm520-79f.qca4019 | ||
board-nec_wg2600hp3.qca9984 | ||
board-p2w_r619ac.qca4019 | ||
board-plasmacloud_pa1200.qca4019 | ||
board-plasmacloud_pa2200.qca4019 | ||
board-plasmacloud_pa2200.qca9888 | ||
board-qxwlan_e2600ac.qca4019 | ||
Makefile |