openwrt/package
Robert Marko 3ad229db0b ipq40xx: add support for MikroTik hAP ac3
This adds support for the MikroTik RouterBOARD RBD53iG-5HacD2HnD
(hAP ac³), a  indoor dual band, dual-radio 802.11ac
wireless AP with external omnidirectional antennae, USB port, five
10/100/1000 Mbps Ethernet ports and PoE passthrough.

See https://mikrotik.com/product/hap_ac3 for more info.

Specifications:
 - SoC: Qualcomm Atheros IPQ4019
 - RAM: 256 MB
 - Storage: 16 MB NOR + 128 MB NAND
 - Wireless:
   · Built-in IPQ4019 (SoC) 802.11b/g/n 2x2:2, 3 dBi antennae
   · Built-in IPQ4019 (SoC) 802.11a/n/ac 2x2:2, 5.5 dBi antennae
 - Ethernet: Built-in IPQ4019 (SoC, QCA8075) , 5x 1000/100/10 port,
             passive PoE in, PoE passtrough on port 5
- 1x USB Type A port

Installation:
1. Boot the initramfs image via TFTP
2. Run "cat /proc/mtd" and look for "ubi" partition mtd device number, ex. "mtd1"
3. Use ubiformat to remove MikroTik specific UBI volumes
* Detach the UBI partition by running: "ubidetach -d 0"
* Format the partition by running: "ubiformat /dev/mtdN -y"
Replace mtdN with the correct mtd index from step 2.
3. Flash the sysupgrade image using "sysupgrade -n"

Signed-off-by: Robert Marko <robimarko@gmail.com>
Tested-by: Mark Birss <markbirss@gmail.com>
Tested-by: Michael Büchler <michael.buechler@posteo.net>
Tested-by: Alex Tomkins <tomkins@darkzone.net>
2021-11-28 17:19:52 +01:00
..
base-files base-files: dont always create kernel UBI volume 2021-11-28 17:17:22 +01:00
boot uboot-lantiq: danube: fix hanging lzma kernel uncompression #2 2021-11-27 21:49:10 +01:00
devel gdb: Make only full gdb depend on libgmp 2021-11-07 18:32:21 +01:00
firmware ipq40xx: add support for MikroTik hAP ac3 2021-11-28 17:19:52 +01:00
kernel ath10k-ct: update version to fix DFS for VHT160 2021-11-28 13:57:41 +01:00
libs gettext: remove package 2021-11-20 21:08:25 +01:00
network hostapd: add beacon_interval to get_status ubus output 2021-11-25 02:41:42 +01:00
system procd: setup /dev/stdin, /dev/stdout and /dev/stderr symlinks 2021-11-23 14:03:39 +00:00
utils f2fstools: set each library package VARIANT 2021-11-01 20:18:55 +01:00
Makefile build: fix opkg install step for large package selection 2021-05-12 11:13:53 +02:00