INAGAKI Hiroshi 3a8d65010d ramips: add support for ELECOM WRC-2533GST2 ... ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 32 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GST2 normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2020-06-21 20:56:42 +02:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
common-tp-link.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-03-21 20:02:55 +01:00
Makefile	ramips: add support for netis WF2770	2020-05-17 18:41:48 +02:00
mt76x8.mk	ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1	2020-05-24 18:14:59 +02:00
mt7620.mk	ramips: add support for Netgear EX6120	2020-06-11 01:41:43 +02:00
mt7621.mk	ramips: add support for ELECOM WRC-2533GST2	2020-06-21 20:56:42 +02:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	ramips: add kmod-usb-dwc2 to ZyXEL Keenetic image	2020-06-03 16:49:28 +02:00
rt3883.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00