mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
ee4a042483
Failing to do so will cause the DMA engine to not initialize properly and fail to forward packets between them, and in some cases will cause spurious transmission with size exceeding allowed packet size, causing a kernel panic. This is behaviour of downstream driver as well, however I haven't observed bug reports about this SoC in the wild, so this commit's purpose is to align this chip with all other SoC's - MT7620 were already using this arrangement. Fixes: #9284 Fixes:60fadae62b("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe") Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commitfc92fecfc7) Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
412 lines
7.1 KiB
Plaintext
412 lines
7.1 KiB
Plaintext
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "ralink,rt5350-soc";
|
|
|
|
aliases {
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
serial0 = &uartlite;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips24KEc";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,57600";
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
palmbus: palmbus@10000000 {
|
|
compatible = "palmbus";
|
|
reg = <0x10000000 0x200000>;
|
|
ranges = <0x0 0x10000000 0x1FFFFF>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sysc: sysc@0 {
|
|
compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc", "syscon";
|
|
reg = <0x0 0x100>;
|
|
};
|
|
|
|
timer: timer@100 {
|
|
compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
|
|
reg = <0x100 0x20>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
watchdog: watchdog@120 {
|
|
compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
|
|
reg = <0x120 0x10>;
|
|
|
|
resets = <&rstctrl 8>;
|
|
reset-names = "wdt";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
intc: intc@200 {
|
|
compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
|
|
reg = <0x200 0x100>;
|
|
|
|
resets = <&rstctrl 19>;
|
|
reset-names = "intc";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
memc: memc@300 {
|
|
compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
|
|
reg = <0x300 0x100>;
|
|
|
|
resets = <&rstctrl 20>;
|
|
reset-names = "mc";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <3>;
|
|
};
|
|
|
|
uart: uart@500 {
|
|
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
|
|
reg = <0x500 0x100>;
|
|
|
|
resets = <&rstctrl 12>;
|
|
reset-names = "uart";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <5>;
|
|
|
|
reg-shift = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@600 {
|
|
compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
|
|
reg = <0x600 0x34>;
|
|
|
|
resets = <&rstctrl 13>;
|
|
reset-names = "pio";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ngpios = <22>;
|
|
ralink,gpio-base = <0>;
|
|
ralink,register-map = [ 00 04 08 0c
|
|
20 24 28 2c
|
|
30 34 ];
|
|
};
|
|
|
|
gpio1: gpio@660 {
|
|
compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
|
|
reg = <0x660 0x24>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ngpios = <6>;
|
|
ralink,gpio-base = <22>;
|
|
ralink,register-map = [ 00 04 08 0c
|
|
10 14 18 1c
|
|
20 24 ];
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c: i2c@900 {
|
|
compatible = "ralink,rt2880-i2c";
|
|
reg = <0x900 0x100>;
|
|
|
|
resets = <&rstctrl 16>;
|
|
reset-names = "i2c";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s: i2s@a00 {
|
|
compatible = "ralink,rt3352-i2s";
|
|
reg = <0xa00 0x100>;
|
|
|
|
resets = <&rstctrl 17>;
|
|
reset-names = "i2s";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <10>;
|
|
|
|
txdma-req = <2>;
|
|
rxdma-req = <3>;
|
|
|
|
dmas = <&gdma 4>,
|
|
<&gdma 6>;
|
|
dma-names = "tx", "rx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@b00 {
|
|
compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
|
|
reg = <0xb00 0x40>;
|
|
|
|
resets = <&rstctrl 18>;
|
|
reset-names = "spi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@b40 {
|
|
compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
|
|
reg = <0xb40 0x60>;
|
|
|
|
resets = <&rstctrl 18>;
|
|
reset-names = "spi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_cs1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uartlite: uartlite@c00 {
|
|
compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
|
|
reg = <0xc00 0x100>;
|
|
|
|
resets = <&rstctrl 19>;
|
|
reset-names = "uartl";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <12>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uartlite_pins>;
|
|
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
systick: systick@d00 {
|
|
compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
|
|
reg = <0xd00 0x10>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <7>;
|
|
};
|
|
|
|
pcm: pcm@2000 {
|
|
compatible = "ralink,rt5350-pcm";
|
|
reg = <0x2000 0x800>;
|
|
|
|
resets = <&rstctrl 11>;
|
|
reset-names = "pcm";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <4>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gdma: gdma@2800 {
|
|
compatible = "ralink,rt3883-gdma";
|
|
reg = <0x2800 0x800>;
|
|
|
|
resets = <&rstctrl 14>;
|
|
reset-names = "dma";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <7>;
|
|
|
|
#dma-cells = <1>;
|
|
#dma-channels = <16>;
|
|
#dma-requests = <16>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "ralink,rt2880-pinmux";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
state_default: pinctrl0 {
|
|
};
|
|
|
|
i2c_pins: i2c_pins {
|
|
i2c_pins {
|
|
groups = "i2c";
|
|
function = "i2c";
|
|
};
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
spi_pins {
|
|
groups = "spi";
|
|
function = "spi";
|
|
};
|
|
};
|
|
|
|
phy_led_pins: phy_led {
|
|
phy_led {
|
|
groups = "led";
|
|
function = "led";
|
|
};
|
|
};
|
|
|
|
uartlite_pins: uartlite {
|
|
uart {
|
|
groups = "uartlite";
|
|
function = "uartlite";
|
|
};
|
|
};
|
|
|
|
uartf_pins: uartf {
|
|
uartf {
|
|
groups = "uartf";
|
|
function = "uartf";
|
|
};
|
|
};
|
|
|
|
spi_cs1: spi1 {
|
|
spi1 {
|
|
groups = "spi_cs1";
|
|
function = "spi_cs1";
|
|
};
|
|
};
|
|
};
|
|
|
|
rstctrl: rstctrl {
|
|
compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
clkctrl: clkctrl {
|
|
compatible = "ralink,rt2880-clock";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
usbphy: usbphy {
|
|
compatible = "ralink,rt3352-usbphy";
|
|
#phy-cells = <0>;
|
|
|
|
ralink,sysctl = <&sysc>;
|
|
resets = <&rstctrl 22 &rstctrl 25>;
|
|
reset-names = "host", "device";
|
|
clocks = <&clkctrl 18>;
|
|
clock-names = "host";
|
|
};
|
|
|
|
ethernet: ethernet@10100000 {
|
|
compatible = "ralink,rt5350-eth";
|
|
reg = <0x10100000 0x10000>;
|
|
|
|
resets = <&rstctrl 21>, <&rstctrl 23>;
|
|
reset-names = "fe", "esw";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <5>;
|
|
|
|
mediatek,switch = <&esw>;
|
|
};
|
|
|
|
esw: esw@10110000 {
|
|
compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
|
|
reg = <0x10110000 0x8000>;
|
|
|
|
resets = <&rstctrl 24>;
|
|
reset-names = "ephy";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <17>;
|
|
};
|
|
|
|
wmac: wmac@10180000 {
|
|
compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
|
|
reg = <0x10180000 0x40000>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <6>;
|
|
|
|
ralink,eeprom = "soc_wmac.eeprom";
|
|
};
|
|
|
|
ehci: ehci@101c0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "generic-ehci";
|
|
reg = <0x101c0000 0x1000>;
|
|
|
|
phys = <&usbphy>;
|
|
phy-names = "usb";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
|
|
ehci_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ohci: ohci@101c1000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "generic-ohci";
|
|
reg = <0x101c1000 0x1000>;
|
|
|
|
phys = <&usbphy>;
|
|
phy-names = "usb";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
|
|
ohci_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
};
|