mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
125 lines
3.4 KiB
Diff
125 lines
3.4 KiB
Diff
From 998fa413419cc659e7e8646e63000d77d326e08b Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
Date: Thu, 5 Jul 2018 16:44:16 +0100
|
|
Subject: [PATCH 342/454] BCM270X_DT: Add CSI defines for all the downstream Pi
|
|
platforms
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 1 +
|
|
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 +
|
|
arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 +
|
|
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 2 ++
|
|
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 +
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 +
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 +
|
|
arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 2 ++
|
|
arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi | 7 +++++++
|
|
arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi | 7 +++++++
|
|
10 files changed, 24 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi
|
|
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
|
|
@@ -1,6 +1,7 @@
|
|
/dts-v1/;
|
|
|
|
#include "bcm2708.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
@@ -2,6 +2,7 @@
|
|
|
|
#include "bcm2708.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
|
|
/ {
|
|
model = "Raspberry Pi Model B+";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
@@ -2,6 +2,7 @@
|
|
|
|
#include "bcm2708.dtsi"
|
|
#include "bcm283x-rpi-smsc9512.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
|
|
/ {
|
|
model = "Raspberry Pi Model B";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
@@ -1,6 +1,8 @@
|
|
/dts-v1/;
|
|
|
|
#include "bcm2708-rpi-cm.dtsi"
|
|
+#include "bcm283x-rpi-csi0-2lane.dtsi"
|
|
+#include "bcm283x-rpi-csi1-4lane.dtsi"
|
|
|
|
/ {
|
|
model = "Raspberry Pi Compute Module";
|
|
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
@@ -2,6 +2,7 @@
|
|
|
|
#include "bcm2709.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
@@ -2,6 +2,7 @@
|
|
|
|
#include "bcm2710.dtsi"
|
|
#include "bcm283x-rpi-lan7515.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
@@ -2,6 +2,7 @@
|
|
|
|
#include "bcm2710.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
@@ -1,6 +1,8 @@
|
|
/dts-v1/;
|
|
|
|
#include "bcm2710.dtsi"
|
|
+#include "bcm283x-rpi-csi0-2lane.dtsi"
|
|
+#include "bcm283x-rpi-csi1-4lane.dtsi"
|
|
|
|
/ {
|
|
model = "Raspberry Pi Compute Module 3";
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi
|
|
@@ -0,0 +1,7 @@
|
|
+&csi0 {
|
|
+ port {
|
|
+ endpoint {
|
|
+ data-lanes = <1 2>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi
|
|
@@ -0,0 +1,7 @@
|
|
+&csi1 {
|
|
+ port {
|
|
+ endpoint {
|
|
+ data-lanes = <1 2 3 4>;
|
|
+ };
|
|
+ };
|
|
+};
|