ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 07:22:33 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
312c05611b
openwrt/target/linux/brcm2708/patches-4.14/950-0342-BCM270X_DT-Add-CSI-defines-for-all-the-downstream-Pi.patch

125 lines
3.4 KiB
Diff
Raw Normal View History

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
From 998fa413419cc659e7e8646e63000d77d326e08b Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Thu, 5 Jul 2018 16:44:16 +0100
Subject: [PATCH 342/454] BCM270X_DT: Add CSI defines for all the downstream Pi
platforms
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 1 +
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 2 ++
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 +
arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 2 ++
arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi | 7 +++++++
arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi | 7 +++++++
10 files changed, 24 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi
--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
@@ -1,6 +1,7 @@
/dts-v1/;
#include "bcm2708.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
/ {
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -2,6 +2,7 @@
#include "bcm2708.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
/ {
model = "Raspberry Pi Model B+";
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -2,6 +2,7 @@
#include "bcm2708.dtsi"
#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
/ {
model = "Raspberry Pi Model B";
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -1,6 +1,8 @@
/dts-v1/;
#include "bcm2708-rpi-cm.dtsi"
+#include "bcm283x-rpi-csi0-2lane.dtsi"
+#include "bcm283x-rpi-csi1-4lane.dtsi"
/ {
model = "Raspberry Pi Compute Module";
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -2,6 +2,7 @@
#include "bcm2709.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
/ {
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
@@ -2,6 +2,7 @@
#include "bcm2710.dtsi"
#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
/ {
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
@@ -2,6 +2,7 @@
#include "bcm2710.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
/ {
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
@@ -1,6 +1,8 @@
/dts-v1/;
#include "bcm2710.dtsi"
+#include "bcm283x-rpi-csi0-2lane.dtsi"
+#include "bcm283x-rpi-csi1-4lane.dtsi"
/ {
model = "Raspberry Pi Compute Module 3";
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi
@@ -0,0 +1,7 @@
+&csi0 {
+ port {
+ endpoint {
+ data-lanes = <1 2>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi
@@ -0,0 +1,7 @@
+&csi1 {
+ port {
+ endpoint {
+ data-lanes = <1 2 3 4>;
+ };
+ };
+};
Reference in New Issue Copy Permalink