mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
cddd459140
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
453 lines
9.8 KiB
Diff
453 lines
9.8 KiB
Diff
From a5009b362d65c24e7b2a40824e351903d75a47dc Mon Sep 17 00:00:00 2001
|
|
From: Alex Marginean <alexandru.marginean@nxp.com>
|
|
Date: Mon, 6 Jan 2020 16:36:44 +0200
|
|
Subject: [PATCH] arm64: dts: fsl-ls1028a: prepare dts for overlay
|
|
|
|
Named the ports node of the Felix Eth switch so it can be used in DT
|
|
overlays to associate the ports with proper PHYs.
|
|
Ports are now by default disabled in dtsi, so if the board dts doesn't
|
|
do anything about them they stay disabled.
|
|
Updated RDB and QDS dts files to match.
|
|
Replaced all 'phy-connection-type' with 'phy-mode'.
|
|
The set-up for protocol 7777 on QDS was changed to a single quad port card
|
|
in slot 1. This requires a QDS board with no lane B rework and a AQR412
|
|
or similar PHY card without any lane rework done on it.
|
|
|
|
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
|
|
---
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi | 58 ++++++++++-----------
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi | 59 ++++++++++------------
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi | 51 ++++++++++++-------
|
|
.../boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi | 43 ++++++++++------
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 44 +++++++++-------
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 27 +++++++---
|
|
6 files changed, 161 insertions(+), 121 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtsi
|
|
@@ -7,50 +7,50 @@
|
|
*/
|
|
|
|
&mdio_slot1 {
|
|
- /* two ports on AQR412 */
|
|
- slot1_sxgmii2: ethernet-phy@2 {
|
|
- reg = <0x2>;
|
|
+ slot1_sxgmii0: ethernet-phy@0 {
|
|
+ reg = <0x0>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
- slot1_sxgmii3: ethernet-phy@3 {
|
|
- reg = <0x3>;
|
|
+
|
|
+ slot1_sxgmii1: ethernet-phy@1 {
|
|
+ reg = <0x1>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
-};
|
|
|
|
-&mdio_slot2 {
|
|
- slot2_sxgmii0: ethernet-phy@2 {
|
|
- /* AQR112 */
|
|
+ slot1_sxgmii2: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
-};
|
|
|
|
-&mdio_slot3 {
|
|
- slot3_sxgmii0: ethernet-phy@2 {
|
|
- /* AQR112 */
|
|
- reg = <0x2>;
|
|
+ slot1_sxgmii3: ethernet-phy@3 {
|
|
+ reg = <0x3>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
};
|
|
|
|
/* l2switch ports */
|
|
-&switch_port0 {
|
|
- phy-handle = <&slot1_sxgmii2>;
|
|
- phy-connection-type = "2500base-x";
|
|
-};
|
|
+&mscc_felix_ports {
|
|
+ port@0 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sxgmii0>;
|
|
+ phy-mode = "2500base-x";
|
|
+ };
|
|
|
|
-&switch_port1 {
|
|
- phy-handle = <&slot2_sxgmii0>;
|
|
- phy-connection-type = "2500base-x";
|
|
-};
|
|
+ port@1 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sxgmii1>;
|
|
+ phy-mode = "2500base-x";
|
|
+ };
|
|
|
|
-&switch_port2 {
|
|
- phy-handle = <&slot3_sxgmii0>;
|
|
- phy-connection-type = "2500base-x";
|
|
-};
|
|
+ port@2 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sxgmii2>;
|
|
+ phy-mode = "2500base-x";
|
|
+ };
|
|
|
|
-&switch_port3 {
|
|
- phy-handle = <&slot1_sxgmii3>;
|
|
- phy-connection-type = "2500base-x";
|
|
+ port@3 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sxgmii3>;
|
|
+ phy-mode = "2500base-x";
|
|
+ };
|
|
};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtsi
|
|
@@ -11,50 +11,47 @@
|
|
slot1_sgmii0: ethernet-phy@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
+
|
|
slot1_sgmii1: ethernet-phy@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
+
|
|
slot1_sgmii2: ethernet-phy@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
- slot1_sgmii3: ethernet-phy@1f {
|
|
- reg = <0x1f>;
|
|
- };
|
|
-};
|
|
|
|
-&mdio_slot2 {
|
|
- /* VSC8234 */
|
|
- slot2_sgmii0: ethernet-phy@1c {
|
|
- reg = <0x1c>;
|
|
- };
|
|
- slot2_sgmii1: ethernet-phy@1d {
|
|
- reg = <0x1d>;
|
|
- };
|
|
- slot2_sgmii2: ethernet-phy@1e {
|
|
- reg = <0x1e>;
|
|
- };
|
|
- slot2_sgmii3: ethernet-phy@1f {
|
|
+ slot1_sgmii3: ethernet-phy@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
/* l2switch ports */
|
|
-&switch_port0 {
|
|
- phy-handle = <&slot1_sgmii0>;
|
|
- phy-connection-type = "sgmii";
|
|
-};
|
|
+&mscc_felix_ports {
|
|
+ port@0 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sgmii0>;
|
|
+ phy-mode = "sgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port1 {
|
|
- phy-handle = <&slot2_sgmii0>;
|
|
- phy-connection-type = "sgmii";
|
|
-};
|
|
+ port@1 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sgmii1>;
|
|
+ phy-mode = "sgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port2 {
|
|
- phy-handle = <&slot1_sgmii2>;
|
|
- phy-connection-type = "sgmii";
|
|
-};
|
|
+ port@2 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sgmii2>;
|
|
+ phy-mode = "sgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port3 {
|
|
- phy-handle = <&slot1_sgmii3>;
|
|
- phy-connection-type = "sgmii";
|
|
+ port@3 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot1_sgmii3>;
|
|
+ phy-mode = "sgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x3xx.dtsi
|
|
@@ -8,41 +8,54 @@
|
|
|
|
&mdio_slot2 {
|
|
/* 4 ports on AQR412 */
|
|
- slot2_qsgmii0: ethernet-phy@0 {
|
|
+ slot2_qxgmii0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
- slot2_qsgmii1: ethernet-phy@1 {
|
|
+
|
|
+ slot2_qxgmii1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
- slot2_qsgmii2: ethernet-phy@2 {
|
|
+
|
|
+ slot2_qxgmii2: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
- slot2_qsgmii3: ethernet-phy@3 {
|
|
+
|
|
+ slot2_qxgmii3: ethernet-phy@3 {
|
|
reg = <0x3>;
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
};
|
|
};
|
|
|
|
/* l2switch ports */
|
|
-&switch_port0 {
|
|
- phy-handle = <&slot2_qsgmii0>;
|
|
- phy-connection-type = "usxgmii";
|
|
-};
|
|
+&mscc_felix_ports {
|
|
+ port@0 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qxgmii0>;
|
|
+ phy-mode = "usxgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port1 {
|
|
- phy-handle = <&slot2_qsgmii1>;
|
|
- phy-connection-type = "usxgmii";
|
|
-};
|
|
+ port@1 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qxgmii1>;
|
|
+ phy-mode = "usxgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port2 {
|
|
- phy-handle = <&slot2_qsgmii2>;
|
|
- phy-connection-type = "usxgmii";
|
|
-};
|
|
+ port@2 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qxgmii2>;
|
|
+ phy-mode = "usxgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port3 {
|
|
- phy-handle = <&slot2_qsgmii3>;
|
|
- phy-connection-type = "usxgmii";
|
|
+ port@3 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qxgmii3>;
|
|
+ phy-mode = "usxgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-x5xx.dtsi
|
|
@@ -11,34 +11,47 @@
|
|
slot2_qsgmii0: ethernet-phy@8 {
|
|
reg = <0x8>;
|
|
};
|
|
+
|
|
slot2_qsgmii1: ethernet-phy@9 {
|
|
reg = <0x9>;
|
|
};
|
|
+
|
|
slot2_qsgmii2: ethernet-phy@a {
|
|
reg = <0xa>;
|
|
};
|
|
+
|
|
slot2_qsgmii3: ethernet-phy@b {
|
|
reg = <0xb>;
|
|
};
|
|
};
|
|
|
|
/* l2switch ports */
|
|
-&switch_port0 {
|
|
- phy-handle = <&slot2_qsgmii0>;
|
|
- phy-connection-type = "qsgmii";
|
|
-};
|
|
+&mscc_felix_ports {
|
|
+ port@0 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qsgmii0>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port1 {
|
|
- phy-handle = <&slot2_qsgmii1>;
|
|
- phy-connection-type = "qsgmii";
|
|
-};
|
|
+ port@1 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qsgmii1>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port2 {
|
|
- phy-handle = <&slot2_qsgmii2>;
|
|
- phy-connection-type = "qsgmii";
|
|
-};
|
|
+ port@2 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qsgmii2>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port3 {
|
|
- phy-handle = <&slot2_qsgmii3>;
|
|
- phy-connection-type = "qsgmii";
|
|
+ port@3 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&slot2_qsgmii3>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
@@ -233,28 +233,34 @@
|
|
};
|
|
|
|
/* l2switch ports */
|
|
-&switch_port0 {
|
|
- phy-handle = <&qsgmii_phy1>;
|
|
- phy-connection-type = "qsgmii";
|
|
- managed = "in-band-status";
|
|
-};
|
|
+&mscc_felix_ports {
|
|
+ port@0 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&qsgmii_phy1>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port1 {
|
|
- phy-handle = <&qsgmii_phy2>;
|
|
- phy-connection-type = "qsgmii";
|
|
- managed = "in-band-status";
|
|
-};
|
|
+ port@1 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&qsgmii_phy2>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port2 {
|
|
- phy-handle = <&qsgmii_phy3>;
|
|
- phy-connection-type = "qsgmii";
|
|
- managed = "in-band-status";
|
|
-};
|
|
+ port@2 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&qsgmii_phy3>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
|
|
-&switch_port3 {
|
|
- phy-handle = <&qsgmii_phy4>;
|
|
- phy-connection-type = "qsgmii";
|
|
- managed = "in-band-status";
|
|
+ port@3 {
|
|
+ status = "okay";
|
|
+ phy-handle = <&qsgmii_phy4>;
|
|
+ phy-mode = "qsgmii";
|
|
+ managed = "in-band-status";
|
|
+ };
|
|
};
|
|
|
|
&sai4 {
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
|
|
@@ -774,30 +774,39 @@
|
|
clocks = <&clockgen 4 0>;
|
|
little-endian;
|
|
};
|
|
- switch@0,5 {
|
|
+
|
|
+ ethernet-switch@0,5 {
|
|
reg = <0x000500 0 0 0 0>;
|
|
/* IEP INT_B */
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
- ports {
|
|
+ mscc_felix_ports: ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* external ports */
|
|
- switch_port0: port@0 {
|
|
+ mscc_felix_port0: port@0 {
|
|
reg = <0>;
|
|
+ status = "disabled";
|
|
};
|
|
- switch_port1: port@1 {
|
|
+
|
|
+ mscc_felix_port1: port@1 {
|
|
reg = <1>;
|
|
+ status = "disabled";
|
|
};
|
|
- switch_port2: port@2 {
|
|
+
|
|
+ mscc_felix_port2: port@2 {
|
|
reg = <2>;
|
|
+ status = "disabled";
|
|
};
|
|
- switch_port3: port@3 {
|
|
+
|
|
+ mscc_felix_port3: port@3 {
|
|
reg = <3>;
|
|
+ status = "disabled";
|
|
};
|
|
+
|
|
/* internal to-cpu ports */
|
|
- port@4 {
|
|
+ mscc_felix_port4: port@4 {
|
|
reg = <4>;
|
|
ethernet = <&enetc_port2>;
|
|
phy-mode = "gmii";
|
|
@@ -807,7 +816,8 @@
|
|
full-duplex;
|
|
};
|
|
};
|
|
- port@5 {
|
|
+
|
|
+ mscc_felix_port5: port@5 {
|
|
reg = <5>;
|
|
phy-mode = "gmii";
|
|
status = "disabled";
|
|
@@ -819,6 +829,7 @@
|
|
};
|
|
};
|
|
};
|
|
+
|
|
enetc_port3: ethernet@0,6 {
|
|
compatible = "fsl,enetc";
|
|
reg = <0x000600 0 0 0 0>;
|