openwrt/target/linux/mediatek/dts
Marcel Ziswiler f6d2a23cbc mediatek: add support for Netgear WAX206
Specifications:
* SoC: MediaTek MT7622BV
* RAM: DDR3 512 MiB (Nanya NT5CC256M16ER-EK)
* Flash: SPI-NAND 256 MiB (Toshiba TC58CVG1S3HRAIJ)
* Wi-Fi 2.4/5 GHz 4T4R:
  * 2.4 GHz: MediaTek MT7622BV
  * 5 GHz: MediaTek MT7915AN/MT7975AN
* Ethernet: 4x 10/100/1000 Mbps LAN,
            1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221B PHY)
* Switch: MediaTek MT7531AE
* LEDs/Keys: 8/1 (Power, Internet, LAN1, LAN2, LAN3, LAN4,
             Wifin and Wifia dual-colour LEDs + Reset pin)
* UART: Marked J19 on board VCC GND TX RX, beginning from "1". 3.3v,
        115200n8
* Power: 12 VDC, 2.5 A

Installation:
* Flash the factory image through the stock web interface, or TFTP to
  the bootloader. NMRP can be used to TFTP without opening the case.
* U-Boot allows booting an initramfs image via TFTP as follows:
  setenv ipaddr 192.168.1.1
  setenv serverip 192.168.1.100
  tftpboot openwrt-mediatek-mt7622-netgear_wax206-initramfs-recovery.itb
  bootm

Known Limitations:
* The 2.5G WAN port labeled 'wan' only works for speeds up to 1G at the
  moment. If connected to a multi-gig port the speed has to be manually
  set to 1G/full either for the switch port or in OpenWrt. For example
  add the following to /etc/rc.local to set it on boot:
  /usr/sbin/ethtool -s wan speed 1000 duplex full

Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.

References to WAX206 GPL source:
https://www.downloads.netgear.com/files/GPL/WAX206_V1.0.4.0_Source.rar

* openwrt/target/linux/mediatek/dts/mt7622-netgear-wax206.dts
  DTS file for this device.
* openwrt/target/linux/mediatek/image/mt7622.mk
  Image creation code for this device

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[fix WAN port (1G only), adjust partition layout, adjust image creation]
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
2023-02-18 15:46:45 +01:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert mtd-mac-address to nvmem implementation 2021-07-19 14:51:22 +02:00
mt7622-elecom-wrc-2533gent.dts mediatek: add an upstreamed spi-nand driver 2022-04-28 18:06:00 +08:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: mt7622: add support for ELECOM WRC-X3200GST3 2022-05-21 22:27:01 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: convert mtd-mac-address to nvmem implementation 2021-07-19 14:51:22 +02:00
mt7622-linksys-e8450.dts mediatek: convert mtd-mac-address to nvmem implementation 2021-07-19 14:51:22 +02:00
mt7622-linksys-e8450.dtsi mediatek: disable unsupported background radar detection 2022-09-12 00:14:02 +01:00
mt7622-netgear-wax206.dts mediatek: add support for Netgear WAX206 2023-02-18 15:46:45 +01:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: add an upstreamed spi-nand driver 2022-04-28 18:06:00 +08:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-totolink-a8000ru.dts mediatek: mt7622: add missing vbus regulator node to totolink-a8000ru dts 2022-07-07 00:22:23 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants 2022-09-03 02:27:59 +01:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants 2022-09-03 02:27:59 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: fix ledbar of UniFi 6 LR when running custom U-Boot 2022-09-11 20:26:42 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants 2022-09-03 02:27:59 +01:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: add Ubiquiti UniFi 6 LR v2 targets 2022-06-11 19:51:33 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: mt7622: fix white dome LED of UniFi 6 LR 2022-07-04 19:19:52 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: UniFi 6 LR: disable RTC 2022-06-18 17:32:07 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: mt7622: fix rootfs/ubi detection for Xiaomi AX6S 2023-02-11 21:42:06 +08:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: mt7623: rework images for U7623-02 board 2022-01-23 20:20:37 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: mt7623: rework images for U7623-02 board 2022-01-23 20:20:37 +00:00
mt7629-iptime-a6004mx.dts mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX. 2022-09-12 01:43:49 +01:00
mt7986a-bananapi-bpi-r3-emmc-nor.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3-emmc-snand.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3-nor.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3-snand.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3.dts mediatek: filogic: set correct PWM clock and clean thermal zone 2022-10-09 16:41:16 +01:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00