Thomas Nixon 255268ce1a lantiq: xrx200: enable use of baby jumbo frames ... xrx200 max MTU is reduced so that it works correctly when set to the max, and the max MTU of the switch is increased to match. In 5.10, the switch driver now enables non-standard MTUs on a per-port basis, with the overall frame size set based on the cpu port. When the MTU is not used, this should have no effect. The maximum packet size is limited as large packets cause the switch to lock up. 0702-net-lantiq-add-support-for-jumbo-frames.patch comes from net-next commit 998ac358019e491217e752bc6dcbb3afb2a6fa3e. In 5.4, all switch ports are configured to accept the max MTU, as 5.4 does not have port_max_mtu/port_change_mtu callbacks. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>		2022-01-16 20:51:14 +01:00
..
ase	lantiq: drop kernel 5.4 support	2021-11-27 21:45:04 +01:00
base-files	lantiq: xrx200: switch the subtarget to the mainline DSA driver	2021-06-26 16:05:36 +02:00
falcon	lantiq: drop kernel 5.4 support	2021-11-27 21:45:04 +01:00
files	lantiq: flag FritzBox 7360 family buttons active-low	2022-01-14 22:12:53 +01:00
image	treewide: use uniform vendor value for british telecom	2021-12-12 21:11:38 +01:00
patches-5.10	lantiq: xrx200: enable use of baby jumbo frames	2022-01-16 20:51:14 +01:00
xrx200	lantiq: increase fritz-cal-extract output limit	2022-01-15 23:05:55 +01:00
xway	lantiq: drop kernel 5.4 support	2021-11-27 21:45:04 +01:00
xway_legacy	lantiq: xway_legacy: disable unused switches	2021-11-30 22:29:24 +01:00
config-5.10	kernel: 5.10: consolidate mac80211 crypto options	2021-12-17 16:16:34 +01:00
Makefile	lantiq: switch to kernel 5.10	2021-11-27 21:40:12 +01:00
modules.mk	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00