Mathias Kresin 23e3314cad lantiq: fix thermal sensors driver ... Read the temperature including the decimale place from the CGU_GPHY1_CR register. Decrement the temperature read from the register by 38.0 degree celsius. The temperature range of the sensor is -38.0 to +154 °C and the register value 0 is equal to -38.0 °C. This fixes the report of unrealistic temperatures as seen on all tested boards. Give the SoC a few milliseconds to get the first temperature value. On some rare occasions there is no temperature value in the register when read the first time after activation. This leads to a reported temperature of -38.0 °C on boot. Only version 1.2 of the vr9 SoC has a temperature sensor. Add a check to make sure the driver doesn't load on v1.1 vr9 SoCs. Signed-off-by: Mathias Kresin <dev@kresin.me>		2016-10-19 19:55:06 +02:00
..
base-files	lantiq: rework VG3503J image	2016-10-19 19:06:15 +02:00
dts	lantiq: Sanitize device tree files	2016-10-19 19:55:04 +02:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: use new build code for DGN3500	2016-10-19 19:06:15 +02:00
patches-4.4	lantiq: fix thermal sensors driver	2016-10-19 19:55:06 +02:00
xrx200	lantiq: switch from 34k to 24k	2016-08-23 11:55:32 +02:00
xway	lantiq: switch from 34k to 24k	2016-08-23 11:55:32 +02:00
xway_legacy	lantiq: switch from 34k to 24k	2016-08-23 11:55:32 +02:00
config-4.4	lantiq: add cpu temperatur sensor driver for xrx200	2016-08-03 15:30:13 +02:00
Makefile	use immediate set in target Makefiles	2016-09-10 15:30:38 +02:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00