Mathias Kresin 23e3314cad lantiq: fix thermal sensors driver ... Read the temperature including the decimale place from the CGU_GPHY1_CR register. Decrement the temperature read from the register by 38.0 degree celsius. The temperature range of the sensor is -38.0 to +154 °C and the register value 0 is equal to -38.0 °C. This fixes the report of unrealistic temperatures as seen on all tested boards. Give the SoC a few milliseconds to get the first temperature value. On some rare occasions there is no temperature value in the register when read the first time after activation. This leads to a reported temperature of -38.0 °C on boot. Only version 1.2 of the vr9 SoC has a temperature sensor. Add a check to make sure the driver doesn't load on v1.1 vr9 SoCs. Signed-off-by: Mathias Kresin <dev@kresin.me>		2016-10-19 19:55:06 +02:00
..
imagebuilder	target/imagebuilder: Switch to xz compression instead of bz2	2016-10-15 11:36:51 +02:00
linux	lantiq: fix thermal sensors driver	2016-10-19 19:55:06 +02:00
sdk	target/{sdk,imagebuild}: Fix for symlink-tree	2016-09-30 00:39:25 +02:00
toolchain	target/toolchain: Fix toolchain packaging without package build	2016-09-06 11:40:12 +02:00
Config.in	kernel: add plan 9 fs package	2016-08-11 10:45:33 +02:00
Makefile