Pawel Dembicki 221d8a1c60 ramips: mt7621: add support for NETGEAR WAC104 ... NETGEAR WAC104 is an AP based on castrated R6220, without WAN port and USB. SoC: MediaTek MT7621ST RAM: 128M DDR3 FLASH: 128M NAND WiFi: MediaTek MT7612EN an+ac MediaTek MT7603EN bgn ETH: MediaTek MT7621ST (4x LAN) BTN: 1x Connect (WPS), 1x WLAN, 1x Reset LED: 7x (3x GPIO controlled) Installation: Login to netgear webinterface and flash factory.img Back to stock: Use nmrpflash to revert stock image. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>		2020-06-12 14:13:32 +02:00
..
base-files/etc	ramips: remove set_preinit_iface script	2020-04-04 14:56:14 +08:00
dts	ramips: mt7621: add support for NETGEAR WAC104	2020-06-12 14:13:32 +02:00
files/drivers	ramips: 5.4: handle ERR_PTR properly	2020-05-19 19:03:07 +08:00
image	ramips: mt7621: add support for NETGEAR WAC104	2020-06-12 14:13:32 +02:00
mt76x8	ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1	2020-05-24 18:14:59 +02:00
mt7620	ramips: fix port display for D-Link DIR-810L	2020-06-11 10:21:17 +02:00
mt7621	ramips: mt7621: add support for NETGEAR WAC104	2020-06-12 14:13:32 +02:00
patches-4.14	ramips: remove patches for USB-dwc2	2020-06-03 16:49:28 +02:00
patches-5.4	ramips: add mt7621 ethernet driver improvements	2020-06-10 16:17:12 +02:00
rt288x	ramips: remove default switch setup in 02_network	2020-05-19 19:03:02 +08:00
rt305x	ramips: fix MAC address setup for RT5350F-OLinuXino devices	2020-05-19 19:03:07 +08:00
rt3883	ramips: remove default switch setup in 02_network	2020-05-19 19:03:02 +08:00
Makefile	ramips: add 5.4 as testing kernel	2020-04-12 22:27:18 +08:00
modules.mk	ramips: fix path for dma-ralink and mtk-hsdma	2020-04-05 18:16:17 +08:00