INAGAKI Hiroshi 58b3b557b6 mediatek: mt7622: add support for ELECOM WRC-X3200GST3 ... ELECOM WRC-X3200GST3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7622B. Specifications: - SoC : MediaTek MT7622B - RAM : DDR3 512 MiB (Nanya NT5CC256M16ER-EK) - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7915A - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/4x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J19: 3.3V, GND, TX, RX from power jack side - 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-X3200GST3 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC Addresses: LAN : 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex)) WAN : 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex)) 2.4 GHz: 04:AB:18:xx:xx:79 (Factory, 0x4 (hex)) 5 GHz : 04:AB:18:xx:xx:7A (none) Note: - currently, there is no "phy1tpt" trigger for 5 GHz wlan (MT7915) in "trigger" file of LEDs, use "phy1radio" trigger instead Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2022-05-21 22:27:01 +01:00
..
gen_scatterfile.sh	target: use SPDX license identifiers on scripts	2021-02-10 15:47:23 +01:00
Makefile	mediatek: mt7623: rework images for U7623-02 board	2022-01-23 20:20:37 +00:00
mt7622.mk	mediatek: mt7622: add support for ELECOM WRC-X3200GST3	2022-05-21 22:27:01 +01:00
mt7623.mk	mediatek: mt7623: simplify partition generation	2022-01-31 15:02:36 +00:00
mt7629.mk	mediatek: fix image building	2020-05-04 16:28:46 +02:00