ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 00:41:17 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1e7033d188
openwrt/target/linux/d1/patches-6.1/0029-riscv-dts-allwinner-Add-Allwinner-D1-Nezha-devicetre.patch
Zoltan HERPAI 99545b4bb1 d1: add new target 
This target adds support for the Allwinner D1 RISC-V based SoCs.

 - RISC-V single-core T-Head C906 (RV64GCV)
 - Tensilica HiFi4 DSP
 - DDR2/DDR3 support
 - 10/100/1000M ethernet
 - usual peripherals like USB2, SPI, I2C, PWM, etc.

Four boards are supported:
 - Dongshan Nezha STU
    - 512Mb RAM
    - ethernet

 - LicheePi RV Dock
    - 512Mb RAM
    - wireless-only (RTL8723DS)

 - MangoPi MQ-Pro
    - 512Mb RAM
    - there are pads available for an SPI flash
    - wireless-only (RTL8723DS)

 - Nezha D1
    - 512Mb/1Gb/2Gb RAM
    - 256Mb NAND flash
    - ethernet, wireless

Installation:
Standard SD-card installation via dd-ing the generated image to
an SD-card of at least 256Mb.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-02-29 16:50:22 +01:00

264 lines
6.2 KiB
Diff
Raw Blame History

From 5da27190c54b7a51062786eb01246f6f4cf2ba98 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Tue, 28 Jun 2022 23:31:16 -0500
Subject: [PATCH 029/117] riscv: dts: allwinner: Add Allwinner D1 Nezha
devicetree
"D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
plus low-speed I/O from the SoC and a GPIO expander chip.
Most other D1 boards copied the Nezha's power tree, with the 1.8V rail
powered by the SoCs internal LDOA, analog domains powered by ALDO, and
the rest of the board powered by always-on fixed regulators. Some (but
not all) boards also copied the PWM CPU regulator. To avoid duplication,
factor out the out the regulator references that are common across all
known boards.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/riscv/boot/dts/allwinner/Makefile | 1 +
.../sun20i-d1-common-regulators.dtsi | 51 ++++++
.../boot/dts/allwinner/sun20i-d1-nezha.dts | 171 ++++++++++++++++++
3 files changed, 223 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
--- a/arch/riscv/boot/dts/allwinner/Makefile
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -1 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/ {
+ reg_vcc: vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vcc_3v3: vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_vcc>;
+ };
+};
+
+&lradc {
+ vref-supply = <&reg_aldo>;
+};
+
+&pio {
+ vcc-pb-supply = <&reg_vcc_3v3>;
+ vcc-pc-supply = <&reg_vcc_3v3>;
+ vcc-pd-supply = <&reg_vcc_3v3>;
+ vcc-pe-supply = <&reg_vcc_3v3>;
+ vcc-pf-supply = <&reg_vcc_3v3>;
+ vcc-pg-supply = <&reg_vcc_3v3>;
+};
+
+&reg_aldo {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vdd33-supply = <&reg_vcc_3v3>;
+};
+
+&reg_hpldo {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ hpldoin-supply = <&reg_vcc_3v3>;
+};
+
+&reg_ldoa {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ ldo-in-supply = <&reg_vcc_3v3>;
+};
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-d1-common-regulators.dtsi"
+
+/ {
+ model = "Allwinner D1 Nezha";
+ compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
+
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &xr829;
+ mmc0 = &mmc0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_usbvbus: usbvbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbvbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ enable-active-high;
+ vin-supply = <&reg_vcc>;
+ };
+
+ /*
+ * This regulator is PWM-controlled, but the PWM controller is not
+ * yet supported, so fix the regulator to its default voltage.
+ */
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&reg_vcc>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpu>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-0 = <&rgmii_pe_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&reg_vcc_3v3>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcf8574a: gpio@38 {
+ compatible = "nxp,pcf8574a";
+ reg = <0x38>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+};
+
+&lradc {
+ status = "okay";
+
+ button-160 {
+ label = "OK";
+ linux,code = <KEY_OK>;
+ channel = <0>;
+ voltage = <160000>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ disable-wp;
+ vmmc-supply = <&reg_vcc_3v3>;
+ vqmmc-supply = <&reg_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <&reg_vcc_3v3>;
+ vqmmc-supply = <&reg_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ xr829: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ usb0_vbus-supply = <&reg_usbvbus>;
+ usb1_vbus-supply = <&reg_vcc>;
+ status = "okay";
+};
Reference in New Issue View Git Blame Copy Permalink