From 5da27190c54b7a51062786eb01246f6f4cf2ba98 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 28 Jun 2022 23:31:16 -0500 Subject: [PATCH 029/117] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree "D1 Nezha" is Allwinner's first-party development board for the D1 SoC. It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio, HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports, plus low-speed I/O from the SoC and a GPIO expander chip. Most other D1 boards copied the Nezha's power tree, with the 1.8V rail powered by the SoCs internal LDOA, analog domains powered by ALDO, and the rest of the board powered by always-on fixed regulators. Some (but not all) boards also copied the PWM CPU regulator. To avoid duplication, factor out the out the regulator references that are common across all known boards. Reviewed-by: Heiko Stuebner Tested-by: Conor Dooley Tested-by: Heiko Stuebner Signed-off-by: Samuel Holland --- arch/riscv/boot/dts/allwinner/Makefile | 1 + .../sun20i-d1-common-regulators.dtsi | 51 ++++++ .../boot/dts/allwinner/sun20i-d1-nezha.dts | 171 ++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts --- a/arch/riscv/boot/dts/allwinner/Makefile +++ b/arch/riscv/boot/dts/allwinner/Makefile @@ -1 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb --- /dev/null +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-common-regulators.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2021-2022 Samuel Holland + +/ { + reg_vcc: vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_3v3: vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc>; + }; +}; + +&lradc { + vref-supply = <®_aldo>; +}; + +&pio { + vcc-pb-supply = <®_vcc_3v3>; + vcc-pc-supply = <®_vcc_3v3>; + vcc-pd-supply = <®_vcc_3v3>; + vcc-pe-supply = <®_vcc_3v3>; + vcc-pf-supply = <®_vcc_3v3>; + vcc-pg-supply = <®_vcc_3v3>; +}; + +®_aldo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vdd33-supply = <®_vcc_3v3>; +}; + +®_hpldo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + hpldoin-supply = <®_vcc_3v3>; +}; + +®_ldoa { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + ldo-in-supply = <®_vcc_3v3>; +}; --- /dev/null +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2021-2022 Samuel Holland + +/dts-v1/; + +#include +#include + +#include "sun20i-d1.dtsi" +#include "sun20i-d1-common-regulators.dtsi" + +/ { + model = "Allwinner D1 Nezha"; + compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1"; + + aliases { + ethernet0 = &emac; + ethernet1 = &xr829; + mmc0 = &mmc0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_usbvbus: usbvbus { + compatible = "regulator-fixed"; + regulator-name = "usbvbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ + enable-active-high; + vin-supply = <®_vcc>; + }; + + /* + * This regulator is PWM-controlled, but the PWM controller is not + * yet supported, so fix the regulator to its default voltage. + */ + reg_vdd_cpu: vdd-cpu { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <®_vcc>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpu>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-0 = <&rgmii_pe_pins>; + pinctrl-names = "default"; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + phy-supply = <®_vcc_3v3>; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pb0_pins>; + pinctrl-names = "default"; + status = "okay"; + + pcf8574a: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */ + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; +}; + +&lradc { + status = "okay"; + + button-160 { + label = "OK"; + linux,code = ; + channel = <0>; + voltage = <160000>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + disable-wp; + vmmc-supply = <®_vcc_3v3>; + vqmmc-supply = <®_vcc_3v3>; + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + vmmc-supply = <®_vcc_3v3>; + vqmmc-supply = <®_vcc_3v3>; + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + status = "okay"; + + xr829: wifi@1 { + reg = <1>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb8_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + uart-has-rtscts; + pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* XR829 bluetooth is connected here */ +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */ + usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ + usb0_vbus-supply = <®_usbvbus>; + usb1_vbus-supply = <®_vcc>; + status = "okay"; +};