mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-01 03:26:51 +00:00
b38d446ecd
Hardware
--------
SoC: Qualcomm IPQ8064
RAM: 235MB
Flash: 128MB NAND (Micron MT29F1G08ABBDAH4)
32MB SPI-NOR (Spansion FL256SAIFRO)
WLAN2: Qualcomm Atheros QCA9980
WLAN5: Qualcomm Atheros QCA9980
ETH: LAN1 - Atheros AR8035
LAN2 - Atheros AR8033
USB: USB-A, 2.0
LED: Power (yellow/amber)
LAN1 (yellow/amber)
LAN2 (yellow/amber)
WLAN2G (yellow)
WLAN5G (yellow)
BTN: Reset
Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage
MAC Address: LAN1 (label) at APPSBL partition
LAN2: label + 1
WLAN2: label + 8
WLAN5: label + 16
Installation
------------
Connect to the RJ45 console (TTL)
Connect LAN1 to host, set host ip as 192.168.1.10
Start a tftp server to serve the initramfs image
Open console connection (9600n8)
Connect power through the DC jack
`Hit any key to stop autoboot: 5`: press any key
`Enter G,Q,or H:`: press `K` to access the hidden option
`Enter password:`: `fap22b1!$` to access a limited u-boot console
`(FAP) #`: `tftpboot your_initramfs_image_name.itb`
`(FAP) #`: `bootm`
Once OpenWrt has booted, install the firmware through sysupgrade
Signed-off-by: JinGen Lim <openwrt@sn.sg>
99 lines
1.8 KiB
Bash
99 lines
1.8 KiB
Bash
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0;
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
case "$(board_name)" in
|
|
arris,tr4400-v2 |\
|
|
askey,rt4230w-rev6 |\
|
|
compex,wpq864|\
|
|
fortinet,fap-421e|\
|
|
netgear,d7800 |\
|
|
netgear,r7500 |\
|
|
netgear,r7500v2 |\
|
|
netgear,r7800 |\
|
|
netgear,xr450 |\
|
|
netgear,xr500 |\
|
|
nokia,ac400i |\
|
|
qcom,ipq8064-ap148 |\
|
|
qcom,ipq8064-ap161)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
asrock,g10)
|
|
asrock_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
buffalo,wxr-2533dhp)
|
|
buffalo_upgrade_prepare_ubi
|
|
CI_ROOTPART="ubi_rootfs"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
edgecore,ecw5410)
|
|
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
|
if [ "$part" = "rootfs1" ]; then
|
|
fw_setenv active 2 || exit 1
|
|
CI_UBIPART="rootfs2"
|
|
else
|
|
fw_setenv active 1 || exit 1
|
|
CI_UBIPART="rootfs1"
|
|
fi
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
extreme,ap3935)
|
|
CI_ROOTPART="nand_flash"
|
|
CI_KERNPART="PriImg"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
linksys,ea7500-v1 |\
|
|
linksys,ea8500)
|
|
platform_do_upgrade_linksys "$1"
|
|
;;
|
|
meraki,mr42 |\
|
|
meraki,mr52)
|
|
CI_KERNPART="bootkernel2"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
tplink,ad7200 |\
|
|
tplink,c2600)
|
|
PART_NAME="os-image:rootfs"
|
|
MTD_CONFIG_ARGS="-s 0x200000"
|
|
default_do_upgrade "$1"
|
|
;;
|
|
asus,onhub |\
|
|
tplink,onhub)
|
|
export_bootdevice
|
|
export_partdevice CI_ROOTDEV 0
|
|
CI_KERNPART="kernel"
|
|
CI_ROOTPART="rootfs"
|
|
CI_DATAPART="rootfs_data"
|
|
emmc_do_upgrade "$1"
|
|
;;
|
|
tplink,vr2600v)
|
|
MTD_CONFIG_ARGS="-s 0x200000"
|
|
default_do_upgrade "$1"
|
|
;;
|
|
zyxel,nbg6817)
|
|
zyxel_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
platform_copy_config() {
|
|
case "$(board_name)" in
|
|
asus,onhub |\
|
|
tplink,onhub)
|
|
emmc_copy_config
|
|
;;
|
|
esac
|
|
return 0
|
|
}
|