openwrt/target/linux/layerscape/patches-5.4/804-crypto-0018-MLKU-114-3-crypto-caam-OP-TEE-firmware-support.patch
Yangbo Lu cddd459140 layerscape: add patches-5.4
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-05-07 12:53:06 +02:00

118 lines
3.8 KiB
Diff

From 8a0bf079f870379a1e392819ac1116d74500ec01 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Horia=20Geant=C4=83?= <horia.geanta@nxp.com>
Date: Fri, 4 Oct 2019 15:07:41 +0300
Subject: [PATCH] MLKU-114-3 crypto: caam - OP-TEE firmware support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
caam driver needs to be aware of OP-TEE f/w presence, since some things
are done differently:
1. there is no access to controller's register page (note however that
some registers are aliased in job rings' register pages)
It's worth mentioning that due to this, MCFGR[PS] cannot be read
and driver assumes MCFGR[PS] = b'0 - engine using 32-bit address pointers.
This is in sync with the fact that:
-all i.MX SoCs currently use MCFGR[PS] = b'0
-only i.MX OP-TEE use cases don't allow access to controller register page
Note: When DN OP-TEE will start enforcing the same policy,
this solution will stop working and information about caam configuration
will have to deduced in some other way.
2. as a consequence of "1.", part of the initialization is moved in
other f/w (TF-A etc.), e.g. RNG initialization
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
---
drivers/crypto/caam/ctrl.c | 22 ++++++++++++++++++----
drivers/crypto/caam/intern.h | 1 +
2 files changed, 19 insertions(+), 4 deletions(-)
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -583,6 +583,7 @@ static int caam_probe(struct platform_de
u8 rng_vid;
int pg_size;
int BLOCK_OFFSET = 0;
+ bool reg_access = true;
ctrlpriv = devm_kzalloc(&pdev->dev, sizeof(*ctrlpriv), GFP_KERNEL);
if (!ctrlpriv)
@@ -600,6 +601,8 @@ static int caam_probe(struct platform_de
ctrlpriv->scu_en = !!np;
of_node_put(np);
+ reg_access = !ctrlpriv->scu_en;
+
/*
* CAAM clocks cannot be controlled from kernel.
* They are automatically turned on by SCU f/w.
@@ -607,6 +610,17 @@ static int caam_probe(struct platform_de
if (ctrlpriv->scu_en)
goto iomap_ctrl;
+ /*
+ * Until Layerscape and i.MX OP-TEE get in sync,
+ * only i.MX OP-TEE use cases disallow access to
+ * caam page 0 (controller) registers.
+ */
+ np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");
+ ctrlpriv->optee_en = !!np;
+ of_node_put(np);
+
+ reg_access = reg_access && !ctrlpriv->optee_en;
+
if (!imx_soc_match->data) {
dev_err(dev, "No clock data provided for i.MX SoC");
return -EINVAL;
@@ -657,7 +671,7 @@ iomap_ctrl:
caam_little_end = !(bool)(rd_reg32(&perfmon->status) &
(CSTA_PLEND | CSTA_ALT_PLEND));
comp_params = rd_reg32(&perfmon->comp_parms_ms);
- if (!ctrlpriv->scu_en && comp_params & CTPR_MS_PS &&
+ if (reg_access && comp_params & CTPR_MS_PS &&
rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
caam_ptr_sz = sizeof(u64);
else
@@ -708,7 +722,7 @@ iomap_ctrl:
/* Get the IRQ of the controller (for security violations only) */
ctrlpriv->secvio_irq = irq_of_parse_and_map(nprop, 0);
- if (ctrlpriv->scu_en)
+ if (!reg_access)
goto set_dma_mask;
/*
@@ -801,7 +815,7 @@ set_dma_mask:
return -ENOMEM;
}
- if (ctrlpriv->scu_en)
+ if (!reg_access)
goto report_live;
if (ctrlpriv->era < 10) {
@@ -928,7 +942,7 @@ report_live:
ctrlpriv->ctl, &perfmon->status,
&caam_fops_u32_ro);
- if (ctrlpriv->scu_en)
+ if (!reg_access)
goto probe_jrs;
/* Internal covering keys (useful in non-secure mode only) */
--- a/drivers/crypto/caam/intern.h
+++ b/drivers/crypto/caam/intern.h
@@ -83,6 +83,7 @@ struct caam_drv_private {
u8 qi_present; /* Nonzero if QI present in device */
u8 mc_en; /* Nonzero if MC f/w is active */
u8 scu_en; /* Nonzero if SCU f/w is active */
++ u8 optee_en; /* Nonzero if OP-TEE f/w is active */
int secvio_irq; /* Security violation interrupt number */
int virt_en; /* Virtualization enabled in CAAM */
int era; /* CAAM Era (internal HW revision) */