openwrt/package/boot/uboot-envtools/files/ath79
Wenli Looi 520c9917f8 ath79: add support for ASUS RT-AC59U / ZenWiFi CD6
ASUS RT-AC59U / RT-AC59U v2 are wi-fi routers with a large number of
alternate names, including RT-AC1200GE, RT-AC1300G PLUS, RT-AC1500UHP,
RT-AC57U v2/v3, RT-AC58U v2/v3, and RT-ACRH12.

ASUS ZenWiFi AC Mini(CD6) is a mesh wifi system. The unit labeled CD6R
is the router, and CD6N is the node.

Hardware:

- SoC: QCN5502
- RAM: 128 MiB
- UART: 115200 baud (labeled on boards)
- Wireless:
  - 2.4GHz: QCN5502 on-chip 4x4 802.11b/g/n
    currently unsupported due to missing support for QCN550x in ath9k
  - 5GHz: QCA9888 pcie 5GHz 2x2 802.11a/n/ac
- Flash: SPI NOR
  - RT-AC59U / CD6N: 16 MiB
  - RT-AC59U v2 / CD6R: 32 MiB
- Ethernet: gigabit
  - RT-AC59U / RT-AC59U v2: 4x LAN 1x WAN
  - CD6R: 3x LAN 1x WAN
  - CD6N: 2x LAN
- USB:
  - RT-AC59U / RT-AC59U v2: 1 port USB 2.0
  - CD6R / CD6N: none

WiFi calibration data contains valid MAC addresses.

The initramfs image is uncompressed because I was unable to boot a
compressed initramfs from memory (gzip or lzma). Booting a compressed
image from flash works fine.

Installation:

To install without opening the case:

- Set your computer IP address to 192.168.1.10/24
- Power up with the Reset button pressed
- Release the Reset button after about 5 seconds or until you see the
  power LED blinking slowly
- Upload OpenWRT factory image via TFTP client to 192.168.1.1

Revert to stock firmware using the same TFTP method.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
2023-07-08 20:19:00 +02:00

185 lines
3.8 KiB
Plaintext

#
# Copyright (C) 2011-2014 OpenWrt.org
#
[ -e /etc/config/ubootenv ] && exit 0
touch /etc/config/ubootenv
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(board_name)
case "$board" in
alcatel,hh40v|\
alfa-network,ap121f|\
alfa-network,ap121fe|\
alfa-network,n2q|\
alfa-network,n5q|\
alfa-network,pi-wifi4|\
alfa-network,r36a|\
alfa-network,tube-2hq|\
allnet,all-wap02860ac|\
araknis,an-300-ap-i-n|\
araknis,an-500-ap-i-ac|\
araknis,an-700-ap-i-ac|\
arduino,yun|\
asus,rt-ac59u|\
asus,rt-ac59u-v2|\
asus,zenwifi-cd6n|\
asus,zenwifi-cd6r|\
buffalo,bhr-4grv2|\
devolo,magic-2-wifi|\
dlink,dir-859-a1|\
dlink,dir-859-a3|\
dlink,dir-869-a1|\
engenius,eap1200h|\
engenius,eap1750h|\
engenius,eap300-v2|\
engenius,eap350-v1|\
engenius,eap600|\
engenius,ecb1200|\
engenius,ecb1750|\
engenius,ecb350-v1|\
engenius,ecb600|\
engenius,enh202-v1|\
engenius,ens202ext-v1|\
engenius,enstationac-v1|\
engenius,ews660ap|\
etactica,eg200|\
glinet,gl-ar750s-nor|\
glinet,gl-ar750s-nor-nand|\
librerouter,librerouter-v1|\
moxa,awk-1137c|\
netgear,ex7300|\
netgear,ex7300-v2|\
netgear,wndr4300-v2|\
netgear,wndr4500-v3|\
netgear,wnr1000-v2|\
netgear,wnr2000-v3|\
netgear,wnr2200-8m|\
netgear,wnr2200-16m|\
netgear,wnr612-v2|\
ocedo,koala|\
ocedo,raccoon|\
openmesh,a40|\
openmesh,a60|\
openmesh,mr600-v1|\
openmesh,mr600-v2|\
openmesh,mr900-v1|\
openmesh,mr900-v2|\
openmesh,mr1750-v1|\
openmesh,mr1750-v2|\
openmesh,om5p|\
openmesh,om5p-an|\
openmesh,om5p-ac-v1|\
openmesh,om5p-ac-v2|\
samsung,wam250|\
ubnt,airrouter|\
ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,nanobridge-m|\
ubnt,nanostation-loco-m|\
ubnt,nanostation-m|\
ubnt,picostation-m|\
ubnt,powerbridge-m|\
ubnt,rocket-m|\
watchguard,ap100|\
watchguard,ap200|\
watchguard,ap300|\
yuncore,a770|\
yuncore,a782|\
yuncore,a930|\
yuncore,xd3200|\
yuncore,xd4200|\
ziking,cpe46b|\
zyxel,nbg6616)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
;;
aruba,ap-105|\
aruba,ap-115|\
aruba,ap-175|\
dongwon,dw02-412h-64m|\
dongwon,dw02-412h-128m|\
glinet,gl-ar300m-lite|\
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor|\
glinet,gl-ar300m16)
idx="$(find_mtd_index u-boot-env)"
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
;;
buffalo,wzr-hp-ag300h)
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
;;
buffalo,wzr-hp-g300nh-rb|\
buffalo,wzr-hp-g300nh-s|\
linksys,ea4500-v3)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
domywifi,dw33d)
ubootenv_add_uci_config "/dev/mtd4" "0x0" "0x10000" "0x10000"
;;
glinet,gl-ar150)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000"
;;
netgear,wndr3700|\
netgear,wndr3700-v2|\
netgear,wndrmac-v1)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x10000"
;;
netgear,pgzng1|\
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300tn|\
netgear,wndr4300sw)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
;;
openmesh,om2p-v1|\
openmesh,om2p-v2|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v1|\
openmesh,om2p-hs-v2|\
openmesh,om2p-hs-v3|\
openmesh,om2p-hs-v4|\
openmesh,om2p-lc|\
plasmacloud,pa300|\
plasmacloud,pa300e)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
;;
qihoo,c301)
ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000"
;;
ruckus,zf7025|\
ruckus,zf7341|\
ruckus,zf7351|\
ruckus,zf7363)
ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x40000" "0x40000"
;;
ruckus,zf7321|\
ruckus,zf7372)
ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x40000" "0x10000"
;;
sophos,ap15|\
sophos,ap55|\
sophos,ap55c|\
sophos,ap100|\
sophos,ap100c)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
;;
wallys,dr531)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0xf800" "0x10000"
;;
zte,mf286|\
zte,mf286a|\
zte,mf286r)
ubootenv_add_uci_config "/dev/mtd7" "0x0" "0x20000" "0x10000"
;;
esac
config_load ubootenv
config_foreach ubootenv_add_app_config ubootenv
exit 0