mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
bd2e070557
Main part is copied from ar71xx original driver rb91x_nand
written by Gabor Juhos <juhosg@openwrt.org>.
What is done:
* Support of kernel 5.4 and 5.10,
* DTS support,
* New gpio API (gpiod_*) support.
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
(cherry-picked from commit 820e660cd7)
45 lines
1.5 KiB
Diff
45 lines
1.5 KiB
Diff
--- a/drivers/mtd/nand/raw/Kconfig
|
|
+++ b/drivers/mtd/nand/raw/Kconfig
|
|
@@ -559,4 +559,8 @@ config MTD_NAND_RB4XX
|
|
Enables support for the NAND flash chip on Mikrotik Routerboard
|
|
RB4xx series.
|
|
|
|
+config MTD_NAND_RB91X
|
|
+ tristate "MikroTik RB91x NAND driver support"
|
|
+ depends on ATH79 && MTD_RAW_NAND
|
|
+
|
|
endif # MTD_RAW_NAND
|
|
--- a/drivers/mtd/nand/raw/Makefile
|
|
+++ b/drivers/mtd/nand/raw/Makefile
|
|
@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm
|
|
obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o
|
|
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
|
|
obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
|
|
+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
|
|
|
|
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
|
|
nand-objs += nand_onfi.o
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -130,6 +130,10 @@ config GPIO_ATH79
|
|
Select this option to enable GPIO driver for
|
|
Atheros AR71XX/AR724X/AR913X SoC devices.
|
|
|
|
+config GPIO_LATCH
|
|
+ tristate "MikroTik RouterBOARD GPIO latch support"
|
|
+ depends on ATH79
|
|
+
|
|
config GPIO_RASPBERRYPI_EXP
|
|
tristate "Raspberry Pi 3 GPIO Expander"
|
|
default RASPBERRYPI_FIRMWARE
|
|
--- a/drivers/gpio/Makefile
|
|
+++ b/drivers/gpio/Makefile
|
|
@@ -67,6 +67,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
|
|
obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o
|
|
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
|
|
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
|
|
+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
|
|
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
|
|
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
|
|
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
|