ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 17:48:58 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
13961da6ce
openwrt/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch
Ahmed Naseef 8eeb57acb7 bcm63xx: Add support for D-Link DSL-2750u rev C1 
This adds support for the D-Link DSL-2750u rev C1.
(https://deviwiki.com/wiki/D-Link_DSL-2750U_rev_C1)

It uses the same hardware as ADB P.DG A4001N.
CPU:   Broadcom BCM63281 (320 MHz)
RAM:   32M (Winbond W9725G6JB)
Flash:   8M (MXIC MX25L6445E)
Ethernet:   4x 100 Mbps
Wireless:   802.11b/g/n: BCM43225
USB:   1x 2.0

Flash instructions:

1.  Assign static IP 192.168.1.100 to PC
2.  Unplug the power source
3.  Press the RESET button at the router, don't release it yet!
4.  Plug the power source.Wait some seconds
5.  Release the RESET button
6.  Browse to http://192.168.1.1
7.  Send the openwrt-bcm63xx-generic-DSL2750U-C1-squashfs-cfe.bin and
    wait some minutes until the firmware upgrade finish.

Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
[DTS improvements, proper board patch, refresh patches]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-12-05 10:51:22 +01:00

385 lines
7.8 KiB
Diff
Raw Blame History

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/pci_ids.h>
#include <asm/addrspace.h>
#include <bcm63xx_board.h>
#include <bcm63xx_cpu.h>
@@ -1445,6 +1446,88 @@ static struct board_info __initdata boar
.has_ehci0 = 1,
};
+static struct board_info __initdata board_CPVA642 = {
+ .name = "CPVA642",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_ct6373_1 = {
+ .name = "CT6373-1",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+/* D-Link DSL-274xB revison C2/C3 */
+static struct board_info __initdata board_dsl_274xb_rev_c = {
+ .name = "AW4139",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+/* D-Link DVA-G3810BN/TL */
+static struct board_info __initdata board_DVAG3810BN = {
+ .name = "DVAG3810BN",
+ .expected_cpu_id = 0x6358,
+
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
static struct board_info __initdata board_DWVS0 = {
.name = "DWV-S0",
.expected_cpu_id = 0x6358,
@@ -1469,6 +1552,238 @@ static struct board_info __initdata boar
.has_ohci0 = 1,
.has_ehci0 = 1,
};
+
+static struct board_info __initdata board_homehub2a = {
+ .name = "HOMEHUB2A",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4322,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+static struct board_info __initdata board_HW520 = {
+ .name = "HW6358GW_B",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+static struct board_info __initdata board_HW553 = {
+ .name = "HW553",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .use_fallback_sprom = 1,
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ },
+};
+
+static struct board_info __initdata board_HW556_A = {
+ .name = "HW556_A",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_ATHEROS,
+ .caldata_offset = 0xf7e000,
+ .slot = 1,
+ .endian_check = 1,
+ .led_pin = 2,
+ .led_active_high = 1,
+ },
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_HW556_B = {
+ .name = "HW556_B",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_ATHEROS,
+ .caldata_offset = 0xefe000,
+ .slot = 1,
+ .endian_check = 1,
+ .led_pin = 2,
+ .led_active_high = 1,
+ },
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_HW556_C = {
+ .name = "HW556_C",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_RALINK,
+ .caldata_offset = 0xeffe00,
+ .slot = 1,
+ .eeprom = "rt2x00.eeprom",
+ },
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_nb4_ser_r0 = {
+ .name = "NB4-SER-r0",
+ .expected_cpu_id = 0x6358,
+
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+static struct board_info __initdata board_nb4_fxc_r1 = {
+ .name = "NB4-FXC-r1",
+ .expected_cpu_id = 0x6358,
+
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+ /* T-Home Speedport W 303V Typ B */
+static struct board_info __initdata board_spw303v = {
+ .name = "96358-502V",
+ .expected_cpu_id = 0x6358,
+
+ .has_pci = 1,
+
+ .has_enet0 = 1,
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6358 */
/*
@@ -1535,7 +1850,20 @@ static const struct board_info __initcon
&board_96358vw,
&board_96358vw2,
&board_AGPFS0,
+ &board_CPVA642,
+ &board_ct6373_1,
+ &board_dsl_274xb_rev_c,
+ &board_DVAG3810BN,
&board_DWVS0,
+ &board_homehub2a,
+ &board_HW520,
+ &board_HW553,
+ &board_HW556_A,
+ &board_HW556_B,
+ &board_HW556_C,
+ &board_nb4_ser_r0,
+ &board_nb4_fxc_r1,
+ &board_spw303v,
#endif /* CONFIG_BCM63XX_CPU_6358 */
};
@@ -1608,11 +1936,24 @@ static struct of_device_id const bcm963x
{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
{ .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
+ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
+ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
+ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
+ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
+ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
+ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
{ .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
+ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
+ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
+ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
#endif /* CONFIG_BCM63XX_CPU_6358 */
#ifdef CONFIG_BCM63XX_CPU_6362
#endif /* CONFIG_BCM63XX_CPU_6362 */
Reference in New Issue View Git Blame Copy Permalink