ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-27 22:59:53 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
openwrt/target/linux/ramips/dts
History
Deng Qingfang 5580a9dd31 ramips: add support for GeHua GHL-R-001 
Specs
	SoC: MT7621AT
	RAM: 512MiB
	Flash: 32MiB MX25L25635F SPI NOR
	2.4G: MT7603EN
	5G: MT7612EN
	Ethernet: 4x GE ports (1x WAN, 3x LAN) with link status LEDs
	USB 3.0
	LEDs: POWER, 5G WIFI, 2.4G WIFI, USB, Internet.
	      The last two ones are controlled by GPIO
	UART: There are 2 UARTs (UARTLITE1/ttyS0 and UARTLITE3/ttyS1) on board.
	      UARTLITE1 is close to LEDs, and UARTLITE3 is close to flash chip.
	      The stock u-boot uses UARTLITE1 by default. Baud rate is 57600

Flash instruction
	1. telnet 192.168.9.1 2317, username is "root" and password is "admin"
	   One can alternatively use UART to log in
	2. Put OpenWrt firmware in a FAT32 USB drive, and connect it to the router
	   One can alternatively download the firmware via wget through Internet
	3. mtd write /path/to/openwrt.bin firmware
	4. reboot

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-12-29 16:03:30 +01:00
..
3G150B.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
3G300M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
3G-6200N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
3G-6200NL.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
11ACNAS.dts
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
A5-V11.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AC1200RM.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AI-BR100.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AIR3GII.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0256N-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0256N-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0256N.dtsi
ramips: fix dtc warnings
2018-08-04 08:39:35 +02:00
ALL5002.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL5003.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AP-MT7621A-V60.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AR670W.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
AR725W.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC2-v1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC20i.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC20v1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC20v4.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ArcherC50.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC50V3.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ArcherMR200.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ASL26555-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ASL26555-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ASL26555.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ATP-52B.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWAPN2403.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWM002-EVB-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWM002-EVB-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWM002-EVB.dtsi
ramips: fix dtc warnings
2018-08-04 08:39:35 +02:00
AWUSFREE1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BC2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BDCOM-WAP2100-SK.dts
ramips: bdcom-wap2100: Change DTS license to GPL-2.0-or-later OR MIT
2018-11-29 13:15:44 +01:00
BOCCO.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BR-6475ND.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BR-6478AC-V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BROADWAY.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
C108.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
CARAMBOLA.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
CF-WR800N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
CreativeBox-v1.dts
ramips: add support for CreativeBox v1
2018-12-28 12:45:23 +01:00
CS-QR10.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
CY-SWR1100.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
D105.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
D240.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DAP-1350.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DAP-1522-A1.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
DB-WRT01.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
DCH-M225.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
DCS-930.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DCS-930L-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-300-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-300-B7.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-320-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-600-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-610-A1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-615-D.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
DIR-615-H1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
DIR-620-A1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-620-D1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-645.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-810L.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-860L-B1.dts
ramips: fix firmware compatible string for dir860l-b1
2018-12-08 14:18:42 +01:00
DUZUN-DM06.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DWR-116-A1.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
DWR-118-A1.dts
ramips: add support for D-Link DWR-118-A1
2018-12-03 15:34:56 +01:00
DWR-118-A2.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
DWR-512-B.dts
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
DWR-921-C1.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
DWR-922-E2.dts
ramips: add support for DLINK DWR-922-E2
2018-12-29 16:03:30 +01:00
E1700.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
elecom_wrc-gst.dtsi
ramips: add SPDX license identifier into some dts,dtsi
2018-12-28 12:45:23 +01:00
ESR-9753.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
EW1200.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
EX2700.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
EX3700.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
F5D8235_V1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
F5D8235_V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
F7C027.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
FIREWRT.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
FONERA20N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
FREESTATION5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GB-PC1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GB-PC2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GHL-R-001.dts
ramips: add support for GeHua GHL-R-001
2018-12-29 16:03:30 +01:00
GL-MT300A.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT300N-V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT300N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT750.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HC5X61.dtsi
ramips: several fixes for HC5x61
2018-12-15 20:02:07 +01:00
HC5661.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
HC5661A.dts
ramips: disable sdhc for HC5661A
2018-12-06 12:17:25 +01:00
HC5761.dts
ramips: several fixes for HC5x61
2018-12-15 20:02:07 +01:00
HC5861.dts
ramips: several fixes for HC5x61
2018-12-15 20:02:07 +01:00
HC5861B.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HC5962.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
HG255D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HLKRM04.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HPM.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HT-TM02.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HW550-3G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
IP2202.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
JHR-N805R.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
JHR-N825R.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
JHR-N926R.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
K2G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
K2P.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ki_rb.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kn_rc.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kn_rf.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kn.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kng_rc.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
LINKIT7688.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
LR-25G001.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
M2M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M4-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M4-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M4.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
MAC1200RV2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MicroWRT.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
MINIEMBPLUG.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MINIEMBWIFI.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MIR3G.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
MIWIFI-MINI.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
MIWIFI-NANO.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MLW221.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MLWG2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MOFI3500-3GN.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MPRA1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MPRA2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MR-102N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
mt7620a.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
mt7620n.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
mt7621.dtsi
ramips: fix MT7621 dtsi
2018-12-29 16:03:30 +01:00
mt7628an.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
MT7620a_MT7530.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7620a_MT7610e.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7620a_V22SG.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7620a.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7621.dts
ramips: move partitions into partition table node
2018-08-04 08:39:35 +02:00
MT7628.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-750DHP.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-DP150N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-EX300NP.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-EX750NP.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-W300NH2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-WDPR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NA930.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NBG-419N2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NBG-419N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NCS601W.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Newifi-D1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
Newifi-D2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NIXCORE-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NIXCORE-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NIXCORE.dtsi
ramips: fix whitespace and comment issues in dts
2018-08-04 08:39:35 +02:00
NW718.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
OMEGA2.dts
ramips: fix Omega2 compatible string
2017-12-29 22:32:34 +01:00
OMEGA2.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
OMEGA2P.dts
ramips: fix Omega2 compatible string
2017-12-29 22:32:34 +01:00
OY-0001.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
PBR-D1.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
PBR-M1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PSG1208.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PSG1218.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PSG1218A.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
PSG1218B.dts
treewide: dts: Remove default-state=off property from all gpio LED nodes
2018-12-17 08:16:28 +01:00
PSR-680W.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PWH2004.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PX-4885-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PX-4885-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PX-4885.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
R6120.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
R6220.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
R6350.dts
ramips: add SPDX license identifier into some dts,dtsi
2018-12-28 12:45:23 +01:00
RB750Gr3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RBM11G.dts
ramips: mt7621: specify "firmware" partition format for remaining devices
2018-12-13 13:39:56 +01:00
RBM33G.dts
ramips: mt7621: specify "firmware" partition format for remaining devices
2018-12-13 13:39:56 +01:00
RE350.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RE6500.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RP-N53.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
rt2880.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
rt3050.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
rt3352.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
rt3883.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
rt5350.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
RT5350F-OLINUXINO-EVB.dts
ramips: introduce RT5350F-OLINUXINO.dtsi
2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dts
ramips: introduce RT5350F-OLINUXINO.dtsi
2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-AC51U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-G32-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N10-PLUS.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N12-PLUS.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N13U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N14U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N15.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N56U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RUT5XX.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
SAP-G3200U3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
SK-WB8.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
SKW92A.dts
ramips: improve Skylab SKW92A support
2018-11-26 15:54:22 +01:00
SL-R7205.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-638APB-V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-691GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-692GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-714TRU.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Timecloud.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TINY-AC.dts
ramips: mt7620: add missing pci wifi nodes to dts files
2018-12-03 15:34:56 +01:00
TL-MR3020V3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TL-MR3420V5.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WA801NDV5.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR840NV4.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR840NV5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TL-WR841NV13.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR842NV5.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR902ACV3.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TPLINK-8M.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U25AWF-H1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U35WF.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U7621-06-256M-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U7621-06-512M-64M.dts
ramips: add support for UniElec U7621-06-512M-64M variant
2018-11-28 01:11:38 +01:00
U7621-06.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
U7628-01-128M-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U7628-01.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
UBNT-ER-e50.dtsi
ramips: fix dtc compiler warnings
2018-12-06 12:17:25 +01:00
UBNT-ERX-SFP.dts
ramips: add missing soc compatibles to dts
2018-01-09 22:05:46 +01:00
UBNT-ERX.dts
ramips: add support for Ubiquiti EdgeRouter X-SFP
2017-06-07 06:33:33 +02:00
UR-326N4G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
UR-336UN.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
V11STFE.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
V22RW-2X2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VAR11N-300.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE2.dtsi
ramips: backport MT7628 pinmux fixes
2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
VR500.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W06.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W150M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W306R_V20.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W502U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W2914NSV2.dts
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
W2914NSV2.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WCR150GN.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WCR-1166DS.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WD03.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WE1026-5G-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WE1026-5G.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
WF-2881.dts
ramips: mt7621: specify "firmware" partition format for remaining devices
2018-12-13 13:39:56 +01:00
WHR-300HP2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WHR-600D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WHR-1166D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WHR-G300N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIDORA-NEO-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIDORA-NEO-32M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIDORA-NEO.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WITI-256M.dts
ramips: add support for mqmaker witi 512mb version
2018-05-07 18:54:23 +02:00
WITI-512M.dts
ramips: add support for mqmaker witi 512mb version
2018-05-07 18:54:23 +02:00
WITI.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIZARD8800.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIZFI630A.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-330N3G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-330N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-351.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-WN570HA1.dts
ramips: add support for Wavlink WL-WN570HA1
2018-11-28 00:50:35 +01:00
WL-WN575A3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WLI-TX4-AG300N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WLR-6000.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WMDR-143N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WMR-300.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WN3000RPV3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WN-AX1167GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WN-GX300GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WNCE2001.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WNDR3700V5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR512-3GN-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR512-3GN-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR512-3GN.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WR1200JS.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR1201.dts
ramips: add support for MTC Wireless Router WR1201
2018-11-30 00:20:28 +01:00
WR6202.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRC-1167GHBK2-S.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRC-1900GST.dts
ramips: add SPDX license identifier into some dts,dtsi
2018-12-28 12:45:23 +01:00
WRC-2533GST.dts
ramips: add support for ELECOM WRC-1900GST
2018-08-23 22:42:09 +02:00
WRH-300CR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRTNODE2.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRTNODE2P.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WRTNODE2R.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WRTNODE.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WSR-600.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WSR-1166.dts
ramips: mt7621: specify "firmware" partition format for remaining devices
2018-12-13 13:39:56 +01:00
WT1520-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT1520-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT1520.dtsi
ramips: fix dtc warnings
2018-08-04 08:39:35 +02:00
WT3020-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT3020-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT3020.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WZR-AGL300NH.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
X5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
X8.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
XDXRN502J.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Y1.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
Y1.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Y1S.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
YOUKU-YK1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-APE522II.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-CPE102.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WA05.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE826-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE826-32M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE826.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ZBT-WE1226.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE1326.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE2026.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE3526.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WG2626.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WG3526-16M.dts
ramips: mt7621: add compatible strings
2017-07-29 09:24:32 +02:00
ZBT-WG3526-32M.dts
ramips: mt7621: add compatible strings
2017-07-29 09:24:32 +02:00
ZBT-WG3526.dtsi
ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
2018-12-29 12:35:47 +01:00
ZBT-WR8305RT.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZL5900V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZTE-Q7.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00