mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
95d5a99537
The following adds the Aerohive BR200-WP router to OpenWrt under
the mpc85xx/p1010 subtarget.
Hardware:
- SoC: Freescale P1011
- NOR: Intel JS28F512M29EWH 64MB
- Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- 2x LEDs
- 1x Button
- PoE PSE
Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
dhcp; setenv serverip 192.168.1.3;
tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin;
bootm 0x2004000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NOR.
Note:
MAC assigns are taken from stock firmware:
Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID
-------- -------------- -------- ----- ----------- ---- ---------- ---------- ---------
Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 -
Eth0 08ea:44XX:XXc0 wan U - - - - -
Eth1 08ea:44XX:XXc2 access D - - - hive0 -
Eth2 08ea:44XX:XXc3 access D - - - hive0 -
Eth3 08ea:44XX:XXc4 access D - - - hive0 -
Eth4 08ea:44XX:XXc5 access D - - - hive0 -
Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - -
Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 -
Note2:
PoE PSE could be managed with `realtek-poe` package. Example port
config:
config port
option enable '1'
option id '4'
option name 'lan2'
option poe_plus '0'
option priority '2'
config port
option enable '1'
option id '3'
option name 'lan1'
option poe_plus '0'
option priority '1'
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(switch@0 -> switch@10, Device's quickstart says LEDs are
amber and white => add function+color properties but keep
labels around, use pr_info)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
97 lines
3.1 KiB
Makefile
97 lines
3.1 KiB
Makefile
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
|
|
|
|
define Build/spi-loader-okli-compile
|
|
rm -rf $@.spi-loader-okli
|
|
$(CP) spi-loader $@.spi-loader-okli
|
|
$(MAKE) -C $@.spi-loader-okli \
|
|
CROSS_COMPILE="$(TARGET_CROSS)" CONFIG="$(DEVICE_NAME)"
|
|
cp "$@.spi-loader-okli/out/uImage" "$@"
|
|
rm -rf $@.spi-loader-okli
|
|
endef
|
|
|
|
define Build/spi-loader-okli
|
|
cat $(KDIR)/loader-$(1) "$@" > "$@.new"
|
|
mv "$@.new" "$@"
|
|
endef
|
|
|
|
define Device/aerohive_br200-wp
|
|
DEVICE_VENDOR := Aerohive
|
|
DEVICE_MODEL := BR200-WP
|
|
BLOCKSIZE := 128k
|
|
KERNEL_NAME := simpleImage.br200-wp
|
|
KERNEL := kernel-bin | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | uImage none
|
|
KERNEL_ENTRY := 0x1000000
|
|
KERNEL_LOADADDR := 0x1000000
|
|
KERNEL_SIZE := 8m
|
|
IMAGES := fdt.bin sysupgrade.bin
|
|
IMAGE/fdt.bin := append-dtb
|
|
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
|
|
append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
|
|
append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
|
|
append-kernel | append-metadata
|
|
IMAGE_SIZE = 63m
|
|
endef
|
|
TARGET_DEVICES += aerohive_br200-wp
|
|
|
|
define Device/enterasys_ws-ap3715i
|
|
DEVICE_VENDOR := Enterasys
|
|
DEVICE_MODEL := WS-AP3715i
|
|
BLOCKSIZE := 64k
|
|
KERNEL_NAME := simpleImage.ws-ap3715i
|
|
KERNEL_ENTRY := 0x1000000
|
|
KERNEL_LOADADDR := 0x1000000
|
|
KERNEL = kernel-bin | lzma | uImage lzma
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += enterasys_ws-ap3715i
|
|
|
|
define Device/tplink_tl-wdr4900-v1
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := TL-WDR4900
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
|
|
TPLINK_HEADER_VERSION := 1
|
|
TPLINK_HWID := 0x49000001
|
|
TPLINK_HWREV := 1
|
|
TPLINK_FLASHLAYOUT := 16Mppc
|
|
KERNEL_NAME := simpleImage.tl-wdr4900-v1
|
|
KERNEL_INITRAMFS :=
|
|
KERNEL := kernel-bin | uImage none -M 0x4f4b4c49 | spi-loader-okli $(1)
|
|
KERNEL_ENTRY := 0x1000000
|
|
KERNEL_LOADADDR := 0x1000000
|
|
SUPPORTED_DEVICES += tl-wdr4900-v1
|
|
COMPILE := loader-$(1)
|
|
COMPILE/loader-$(1) := spi-loader-okli-compile
|
|
ARTIFACTS := fdt.bin
|
|
ARTIFACT/fdt.bin := append-dtb
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
|
|
IMAGE/factory.bin := tplink-v1-image factory
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wdr4900-v1
|
|
|
|
define Device/watchguard_firebox-t10
|
|
DEVICE_VENDOR := Watchguard
|
|
DEVICE_MODEL := Firebox T10
|
|
DEVICE_PACKAGES := kmod-rtc-s35390a kmod-eeprom-at24
|
|
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += watchguard_firebox-t10
|
|
|
|
define Device/sophos_red-15w-rev1
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := RED 15w
|
|
DEVICE_VARIANT := Rev.1
|
|
# Original firmware uses a dedicated DTB-partition.
|
|
# The bootloader however supports FIT-images.
|
|
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += sophos_red-15w-rev1
|