3 Commits

Author	SHA1	Message	Date
Arınç ÜNAL	fc33c41c21	ramips: do not use GPIO function on switch pins on certain devices ... The pins of the MT7530 switch that translate to GPIO 0, 3, 6, 9 and 12 has got a function, by default, which does the same thing as the netdev trigger. Because of bridge offloading on DSA, the netdev trigger won't see the frames between the switch ports whilst the default function will. Do not use the GPIO function on switch pins on devices that fall under this category. Keep it for: mt7621_belkin_rt1800.dts: There's only one LED which is for the wan interface and there's no bridge offloading between the "wan" interface and other interfaces. mt7621_yuncore_ax820.dts: There's no bridge offloading between the "wan" and "lan" interfaces. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>	2023-01-08 12:31:52 +08:00
Rosen Penev	cfd916065f	mt7621: fix Linksys E7350 GPIO ... When converting this device to use both GMACs, I mistakenly removed state_default, which prevented GPIO LEDs and keys from being used. Fixes: f4eef5f2a1 ("ramips: add support for Linksys E7350") Signed-off-by: Rosen Penev <rosenp@gmail.com>	2022-09-13 22:19:10 +02:00
Rosen Penev	f4eef5f2a1	ramips: add support for Linksys E7350 ... Linksys E7350 is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specifications: - SoC: MT7621 (880MHz, 2 Cores) - RAM: 256 MB - Flash: 128 MB NAND - Wi-Fi: - MT7915D: 2.4/5 GHz (DBDC) - Ethernet: 5x 1GiE MT7530 - USB: 1x USB 3.0 - UART: J4 (57600 baud) - Pinout: [3V3] (TXD) (RXD) (blank) (GND) Notes: * This device has a dual-boot partition scheme, but this firmware works only on boot partition 1. Installation: Upload the generated factory.bin image via the stock web firmware updater. Signed-off-by: Rosen Penev <rosenp@gmail.com>	2022-09-11 01:30:11 +02:00